BranchesTags

Repository files navigation

Labelmaker

This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS), you need a developer account to set up the skill.

A typical session:

User: Alexa, start label maker

Alexa: Welcome to label maker. How many lines of text will there be in this label?

User: two [Though the skill will adjust the font size based on the number of lines, it probably makes sense to limit it to 4 lines for readability.]

Alexa: What should I put on the first line?

User: tuna salad

Alexa: What should I put on the next line?

User: timestamp ["timestamp" by itself on a line will be replaced by the current date. "nothing" by itself will be replaced by a blank line.]

Alexa: How many inches do you want the label to be?

User: one and an eigth [The skill recognizes a non-exhaustive list of decimals and fractions, such as "one point two," "three quarters," and "one and three fifths." In addition, if you say "zero," the skill will make the label the minimum length needed.]

Alexa: How many copies of the label do you want?

User: three

Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017. Shall I print 3 copies of it?

User: yes

Alexa: Your label has been printed.

Hardware Requirements:

  • Brother P-touch 2430PC printer

  • Raspberry Pi with Internet connectivity

Software Requirements:

Installation:

  1. Install required software on Raspberry (in order listed)

  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development" (https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development) for the step-by-step instructions. Make the following changes:

    a. Instead of memory_game.py, you will be running labelmaker.py

    b. Use the templates.yaml in this repository

    c. Use "label maker" for both the "Name" and "Invocation Name" fields"

    d. The Intent Schema for this skill is in this repository under intents.txt.

    e. The utterances for this skill are in this repository under utterances.txt

    f. As part of the "Configure the Skill" step, you will need to add the custom slots "DENOMINATOR" and "CATCHALL" in the configuration section [The list for each custom slot is in this repository under CustomSlots.txt]

About

An Alexa skill for printing labels

Topics

alexa-skillflasklabel-makerp-touchraspberry-pi

Resources

Readme
Activity

Stars

6 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
Labelmaker
This is an Alexa skill written in Flask-Ask that runs on a Raspberry Pi connected
to a Brother P-Touch label printer. Though it does not use Amazon Web Services (AWS),
you need a developer account to set up the skill.
A typical session:
User: Alexa, start label maker
Alexa: Welcome to label maker. How many lines of text will there be in this label?
User: two
[Though the skill will adjust the font size based on the number of lines,
it probably makes sense to limit it to 4 lines for readability.]
Alexa: What should I put on the first line?
User: tuna salad
Alexa: What should I put on the next line?
User: timestamp
["timestamp" by itself on a line will be replaced by the current date.
"nothing" by itself will be replaced by a blank line.]
Alexa: How many inches do you want the label to be?
User: one and an eigth
[The skill recognizes a non-exhaustive list of decimals and fractions,
such as "one point two," "three quarters," and "one and three fifths."
In addition, if you say "zero," the skill will make the label the minimum
length needed.]
Alexa: How many copies of the label do you want?
User: three
Alexa: The label will be 1.125 inches and will say TUNA SALAD\n01/24/2017.
Shall I print 3 copies of it?
User: yes
Alexa: Your label has been printed.
Hardware Requirements:
  • Brother P-touch 2430PC printer
  • Raspberry Pi with Internet connectivity
Software Requirements:
Installation:
  1. Install required software on Raspberry (in order listed)
  2. Build the skill. See this article, "Flask-Ask: A New Python Framework for Rapid Alexa Skills Kit Development"
(https://developer.amazon.com/blogs/post/Tx14R0IYYGH3SKT/Flask-Ask-A-New-Python-Framework-for-Rapid-Alexa-Skills-Kit-Development)
for the step-by-step instructions. Make the following changes:
    a. Instead of memory_game.py, you will be running labelmaker.py
    b. Use the templates.yaml in this repository
    c. Use "label maker" for both the "Name" and "Invocation Name" fields"
    d. The Intent Schema for this skill is in this repository under intents.txt.
    e. The utterances for this skill are in this repository under utterances.txt
    f. As part of the "Configure the Skill" step, you will need to add the
custom slots "DENOMINATOR" and "CATCHALL" in the configuration section
[The list for each custom slot is in this repository under CustomSlots.txt]
About
An Alexa skill for printing labels
Topics
alexa-skillflasklabel-makerp-touchraspberry-pi
Resources
Readme
Activity
Stars
6 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages