Skip to content
BranchesTags

Repository files navigation

Simple SONOFF Server

Current State => Not finished yet, but works.

A lot of this code is based on the findings in this blog http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/ and https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01

The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.

Configuration

Change the sonoff.config.json to fit your environment.

The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.

  • "httpsPort" can be any port.
  • "websocketPort" can be any port.

But make sure, that your router is allowing communication between devices.

{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}

Setup a new device

There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).

sonoff.setupdevice.js

Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.

To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.

wget

(thanks @andrewerrington)

  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"

The device will automatically drop out of AP mode and tries to connect to WiFi and server.

running the server

Start sonoff.server.js This Server keeps the connection to the sonoff devices, and must run permanently.

  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"

About

No description, website, or topics provided.

Resources

Readme
BSD-2-Clause license
Activity

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
GitHub - peros550/simple-sonoff-server · GitHub
Skip to content
BranchesTags
Repository files navigation
Simple SONOFF Server
Current State => Not finished yet, but works.
A lot of this code is based on the findings in this blog
http://blog.nanl.de/2017/05/sonota-flashing-itead-sonoff-devices-via-original-ota-mechanism/
and
https://blog.ipsumdomus.com/sonoff-switch-complete-hack-without-firmware-upgrade-1b2d6632c01
The idea was to have an Openhab Binding. And this is the concept implementation, that works good enough for me to start with. It can be used in combination with the HTTP Binding.
Configuration
Change the sonoff.config.json to fit your environment.
The "server" is the device, which should stay in contact with the SONOFF devices. In my case it was the Raspverry Pi, which also runs Openhab.
  • "httpsPort" can be any port.
  • "websocketPort" can be any port.
But make sure, that your router is allowing communication between devices.
{
"router": {
"SSID": "#############",
"password": ""#############"
},
"server": {
"IP": "192.168.178.##",
"httpsPort": 80,
"websocketPort": 443
}
}
Setup a new device
There are two ways of setting up the devices. Either with the sonoff.setupdevice.js script, or with wget (or anything else that can post an http request to a specific server).
sonoff.setupdevice.js
Start sonoff.setupdevice.js on a computer you like. It will connect to the SONOFF device, so you will lose internet connection. When the scripts runs, you must long-click the black button on the device, and it will be configured to use the "server" as its cloud. Which now runs in your own network.
To run this on a linux device, the network manager must be installed. On an raspberry pi I would suggest to do the setup process manually with wget.
wget
(thanks @andrewerrington)
  1. Put the SonOff/Wemos device in AP mode (press and hold button for 5s)
  2. Find the device and connect to it (SSID: ITEAD-10000xxxxx Password: 12345678)
  3. Add route if necessary sudo route change 0.0.0.0 mask 0.0.0.0 10.10.7.1
  4. (optional) use wget to read device info wget -O- 10.10.7.1/device
  5. use wget to send local WiFi settings to device wget -O- --post-data='{"version":4,"ssid":"yourSSID","password":"yourSSID_PASSWORD","serverName":"n.n.n.n","port":1080}' --header=Content-Type:application/json "http://10.10.7.1/ap"
The device will automatically drop out of AP mode and tries to connect to WiFi and server.
running the server
Start sonoff.server.js
This Server keeps the connection to the sonoff devices, and must run permanently.
  • /devices => list off all devices that are currently known to the server.
  • /devices/:deviceId => shows the status of the device
  • /devices/:deviceId/on => turns the device "on"
  • /devices/:deviceId/off => turns the device "on"
About
No description, website, or topics provided.
Resources
Readme
BSD-2-Clause license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages