Home

Jump to bottom
pgodwin edited this page Jul 23, 2017 · 3 revisions

Welcome to the GopherServer wiki!

Running a Server

To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.

Configure Gopher Server

  1. First, download the latest release and it extract it somewhere on your machine.

  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:

    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.

    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use

    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.

    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.

    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.

    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:

      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).

    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.

      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.

  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port

  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.

Clone this wiki locally

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
Home
Jump to bottom

pgodwin edited this page Jul 23, 2017
·
3 revisions
Welcome to the GopherServer wiki!
Running a Server
To run GopherServer you first need to work out what you want it to host and configure it accordingly. In this example we'll host a local Macintosh Garden proxy so that your older Macintosh's can browse the garden and download files directly.
Configure Gopher Server
  1. First, download the latest release and it extract it somewhere on your machine.
  2. Open GopherServer.exe.config - this is the main configuration file for the GopherServer. The file is reasonably well commented but let's go through some options:
    • boundIP - this is the IP address/interface that the server will listen for connections on. This is usually the IP Address of your machine.
    • boundPort - this is the port to listen on. Usually this is port 70, but it can be anything not in use
    • publicHostname - this is the hostname to include on the Gopher directory listings. This could be a DynDNS address for example, or the friendly hostname of the server. It can also be the same as boundIP, particularly on a local network.
    • publicPort - like publicHostname, this the port to include on the Gopher directory listings. Usually this will be 70.
    • resampleImages - this option along with maximumBitDepth enables resampling the bits per pixel for images. For example, if your target machine is a black & white Mac, you might set this to true, and set maximumBitDepth to 1.
    • maximumBitDepth - maximum bit-depth for re-sampled images. Only applies when resampleImages is set to true. Valid options are:
      • 1 (1-bit black&white)
      • 4 (4-bit 16 colours)
      • 8 (8-bit 256 colours).
    • providerName - the name of the server to provide to use. This is the main configuration option as it determines the type of server we're going to run. See the read me for the various options. Only a single provider can be used at once.
      In this example, we want the Macintosh Garden provider, so it should be set to GopherServer.Providers.MacintoshGarden.
  3. Once you've configured your server, run GopherServer.exe. This should start up a server listening on your configured IP and Port
  4. Open your favourite Gopher client and open your IP and Port (eg gopher://myip:70/). If all goes well you should see the "Search Garden" home page.
Clone this wiki locally