Skip to content
BranchesTags

Repository files navigation

Rails Sample App on OpenShift

Quickstart rails application for openshift.

The easiest way to install this application is to use the [OpenShift Instant Application][template]. If you'd like to install it manually, follow these directions.

OpenShift Considerations

These are some special considerations you may need to keep in mind when running your application on OpenShift.

Database

Your application is configured to use your OpenShift database in Production mode. Because it addresses these databases based on OpenShift Environment Variables, you will need to change these if you want to use your application in Production mode outside of OpenShift.

Assets

Your application is set to precompile the assets every time you push to OpenShift. Any assets you commit to your repo will be preserved alongside those which are generated during the build.

Security

Since these quickstarts are shared code, we had to take special consideration to ensure that security related configuration variables was unique across applications. To accomplish this, we modified some of the configuration files (shown in the table below). Now instead of using the same default values, your application will generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.

This function uses a secure environment variable that only exists on your deployed application and not in your code anywhere. You can then use the function to generate any variables you need. Each of them will be unique so initialize_secret(:a) will differ from initialize_secret(:b) but they will also be consistent, so any time your application uses them (even across reboots), you know they will be the same.

Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store

Manual Installation

  1. Create an account at http://openshift.redhat.com/

  2. Create a rails application

    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,

    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About

No description, website, or topics provided.

Resources

Readme
Activity

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
GitHub - phgrey/places · GitHub
Skip to content
BranchesTags
Repository files navigation
Rails Sample App on OpenShift
Quickstart rails application for openshift.
The easiest way to install this application is to use the [OpenShift
Instant Application][template]. If you'd like to install it
manually, follow these directions.
OpenShift Considerations
These are some special considerations you may need to keep in mind when
running your application on OpenShift.
Database
Your application is configured to use your OpenShift database in
Production mode.
Because it addresses these databases based on OpenShift Environment
Variables, you will need to change these if you
want to use your application in Production mode outside of
OpenShift.
Assets
Your application is set to precompile the assets every time you push
to OpenShift. Any assets you commit to your repo will be preserved
alongside those which are generated during the build.
Security
Since these quickstarts are shared code, we had to take special
consideration to ensure that security related configuration variables
was unique across applications.
To accomplish this, we modified some of the configuration files (shown
in the table below).
Now instead of using the same default values, your application will
generate it's own value using the initialize_secret function from lib/openshift_secret_generator.rb.
This function uses a secure environment variable that only exists on
your deployed application and not in your code anywhere.
You can then use the function to generate any variables you need.
Each of them will be unique so initialize_secret(:a) will differ
from initialize_secret(:b) but they will also be consistent, so any
time your application uses them (even across reboots), you know they
will be the same.
Modified Files
FileVariable
config/initializers/secret_token.rbRailsapp::Application.config.secret_token
config/initializers/session_store.rbRailsapp::Application.config.session_store
Manual Installation
  1. Create an account at http://openshift.redhat.com/
  2. Create a rails application
    rhc app create -a railsapp -t ruby-1.9

    Note: To support Ruby 1.8,
    +++ config/initializers/wrap_parameters.rb
@@ -5,7 +5,7 @@
# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
ActiveSupport.on_load(:action_controller) do
- wrap_parameters format: [:json]
+ wrap_parameters ({:format => [:json]})
end


1. Add mysql support to your application
```
rhc cartridge add -a railsapp -c mysql-5.1
```
1. Add this upstream Rails quickstart repository
```
cd railsapp
git remote add upstream -m master git://github.com/openshift/rails-example.git
git pull -s recursive -X theirs upstream master
```
1. Push your new code
```
git push
```
1. That's it! Enjoy your new Rails application!
[template]: https://openshift.redhat.com/app/console/application_types/rails
License
-------
This code is dedicated to the public domain to the maximum extent permitted by applicable law, pursuant to CC0 (http://creativecommons.org/publicdomain/zero/1.0/)

About
No description, website, or topics provided.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages