Skip to content

Hover labels and event data for cumulative histograms #2115

Closed
Closed
Hover labels and event data for cumulative histograms#2115
Labels
featuresomething new

Description

@alexcjohnson
alexcjohnson
opened on Oct 24, 2017

In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.

My comment from that PR:

this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...

And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.

Response from @etpinard:

so that the hover label at least gets the description "all the data prior to X"

Yeah. I think something along those lines would be useful down the road.

You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"

Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.

Metadata

Metadata

Assignees

No one assigned

    Labels

    featuresomething new

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions

      , 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
       blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
      Skip to content
      Hover labels and event data for cumulative histograms #2115
      Closed
      Closed
      Hover labels and event data for cumulative histograms#2115
      Labels
      featuresomething new
      Description
      @alexcjohnson
      alexcjohnson
      opened on Oct 24, 2017
      In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
      My comment from that PR:
      this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
      And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
      Response from @etpinard:
      so that the hover label at least gets the description "all the data prior to X"
      Yeah. I think something along those lines would be useful down the road.
      You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
      Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
      Metadata
      Metadata
      Assignees
      No one assigned
        Labels
        featuresomething new
        Type
        No type
        Projects
        No projects
          Milestone
          No milestone
          Relationships
          None yet
          Development
          No branches or pull requests
          Issue actions
          
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
          Skip to content
          Hover labels and event data for cumulative histograms #2115
          Closed
          Closed
          Hover labels and event data for cumulative histograms#2115
          Labels
          featuresomething new
          Description
          @alexcjohnson
          alexcjohnson
          opened on Oct 24, 2017
          In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
          My comment from that PR:
          this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
          And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
          Response from @etpinard:
          so that the hover label at least gets the description "all the data prior to X"
          Yeah. I think something along those lines would be useful down the road.
          You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
          Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
          Metadata
          Metadata
          Assignees
          No one assigned
            Labels
            featuresomething new
            Type
            No type
            Projects
            No projects
              Milestone
              No milestone
              Relationships
              None yet
              Development
              No branches or pull requests
              Issue actions
              
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
              Skip to content
              Hover labels and event data for cumulative histograms #2115
              Closed
              Closed
              Hover labels and event data for cumulative histograms#2115
              Labels
              featuresomething new
              Description
              @alexcjohnson
              alexcjohnson
              opened on Oct 24, 2017
              In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
              My comment from that PR:
              this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
              And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
              Response from @etpinard:
              so that the hover label at least gets the description "all the data prior to X"
              Yeah. I think something along those lines would be useful down the road.
              You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
              Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
              Metadata
              Metadata
              Assignees
              No one assigned
                Labels
                featuresomething new
                Type
                No type
                Projects
                No projects
                  Milestone
                  No milestone
                  Relationships
                  None yet
                  Development
                  No branches or pull requests
                  Issue actions
                  
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
                  Skip to content
                  Hover labels and event data for cumulative histograms #2115
                  Closed
                  Closed
                  Hover labels and event data for cumulative histograms#2115
                  Labels
                  featuresomething new
                  Description
                  @alexcjohnson
                  alexcjohnson
                  opened on Oct 24, 2017
                  In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
                  My comment from that PR:
                  this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
                  And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
                  Response from @etpinard:
                  so that the hover label at least gets the description "all the data prior to X"
                  Yeah. I think something along those lines would be useful down the road.
                  You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
                  Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
                  Metadata
                  Metadata
                  Assignees
                  No one assigned
                    Labels
                    featuresomething new
                    Type
                    No type
                    Projects
                    No projects
                      Milestone
                      No milestone
                      Relationships
                      None yet
                      Development
                      No branches or pull requests
                      Issue actions
                      
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
                      Skip to content
                      Hover labels and event data for cumulative histograms #2115
                      Closed
                      Closed
                      Hover labels and event data for cumulative histograms#2115
                      Labels
                      featuresomething new
                      Description
                      @alexcjohnson
                      alexcjohnson
                      opened on Oct 24, 2017
                      In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
                      My comment from that PR:
                      this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
                      And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
                      Response from @etpinard:
                      so that the hover label at least gets the description "all the data prior to X"
                      Yeah. I think something along those lines would be useful down the road.
                      You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
                      Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
                      Metadata
                      Metadata
                      Assignees
                      No one assigned
                        Labels
                        featuresomething new
                        Type
                        No type
                        Projects
                        No projects
                          Milestone
                          No milestone
                          Relationships
                          None yet
                          Development
                          No branches or pull requests
                          Issue actions
                          
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
                          Skip to content
                          Hover labels and event data for cumulative histograms #2115
                          Closed
                          Closed
                          Hover labels and event data for cumulative histograms#2115
                          Labels
                          featuresomething new
                          Description
                          @alexcjohnson
                          alexcjohnson
                          opened on Oct 24, 2017
                          In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
                          My comment from that PR:
                          this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
                          And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
                          Response from @etpinard:
                          so that the hover label at least gets the description "all the data prior to X"
                          Yeah. I think something along those lines would be useful down the road.
                          You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
                          Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
                          Metadata
                          Metadata
                          Assignees
                          No one assigned
                            Labels
                            featuresomething new
                            Type
                            No type
                            Projects
                            No projects
                              Milestone
                              No milestone
                              Relationships
                              None yet
                              Development
                              No branches or pull requests
                              Issue actions
                              
, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
Hover labels and event data for cumulative histograms · Issue #2115 · plotly/plotly.js · GitHub
                              Skip to content
                              Hover labels and event data for cumulative histograms #2115
                              Closed
                              Closed
                              Hover labels and event data for cumulative histograms#2115
                              Labels
                              featuresomething new
                              Description
                              @alexcjohnson
                              alexcjohnson
                              opened on Oct 24, 2017
                              In #2113 we're adding bin range information to histogram hover labels, and input point numbers to the event data. But CDFs were explicitly omitted from these changes because it's not so obvious how to handle them.
                              My comment from that PR:
                              this gets at some of the same issues that led to cumulative.currentbin but in principle a CDF shows the sum of all the data prior to a specific point, not the data within that bin. perhaps I should shift p0 and p1 depending on currentbin so that the hover label at least gets the description "all the data prior to X" precisely correct, even though it'll be a different value than the center of the bar...
                              And then what about pts? You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar" which might be more useful in terms of selecting a single bar, but it's not really what that bar means.
                              Response from @etpinard:
                              so that the hover label at least gets the description "all the data prior to X"
                              Yeah. I think something along those lines would be useful down the road.
                              You could say it should be included and again should be "all the data prior to X" but then it would be meaningless to select a single bar and not all the bars before it. Alternatively pts could contain "all the data that was added in this bar"
                              Sounds to me like both all-data-prior-to-X and data-added-in-this-bar point lists could be useful, so we might have to emit both in the future.
                              Metadata
                              Metadata
                              Assignees
                              No one assigned
                                Labels
                                featuresomething new
                                Type
                                No type
                                Projects
                                No projects
                                  Milestone
                                  No milestone
                                  Relationships
                                  None yet
                                  Development
                                  No branches or pull requests
                                  Issue actions