chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.14.0 by dependabot[bot] · Pull Request #23 · pnwcode/goformation

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabot · 2021-07-07T22:04:32Z

Bumps github.com/onsi/gomega from 1.10.3 to 1.14.0.

Release notes

Sourced from github.com/onsi/gomega's releases.

v1.14.0
1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
v1.13.0
Set consistently and eventually defaults on init (#443)
Using environment variables
Closes #434
Signed-off-by: toby lorne toby@toby.codes
gmeasure provides BETA support for benchmarking (#447)
gmeasure is a new gomega subpackage intended to provide measurement and benchmarking support for durations and values. gmeasure replaces Ginkgo V1s deprecated Measure nodes and provides a migration path for users migrating to Ginkgo V2.
gmeasure is organized around an Experiment metaphor. Experiments can record several different Measurements, with each Measurement comprised of multiple data points. Measurements can hold time.Durations and float64 values and gmeasure includes support measuring the duraiton of callback functions and for sampling functions repeatedly to build an ensemble of data points. In addition, gmeasure introduces a Stopwatch abtraction for easily measuring and recording durations of code segments.
Once measured, users can readily generate Stats for Measurements to capture their key statistics and these stats can be ranked using a Ranking and associated RankingCriteria.
Experiments can be Cached to disk to speed up subsequent runs. Experiments are cached by name and version number which makes it easy to manage and bust the cache.
Finally, gmeasure integrates with Ginkgo V2 via the new ReportEntry abstraction. Experiments, Measurements, and Rankings can all be registered via AddReportEntry. Doing so generates colorful reports as part of Ginkgo's test output.
gmeasure is currently in beta and will go GA around when Ginkgo V2 goes GA.
v1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]

... (truncated)

Changelog

Sourced from github.com/onsi/gomega's changelog.

1.14.0
Features
gmeasure.SamplingConfig now suppers a MinSamplingInterval [e94dbca]
Eventually and Consistently support functions that make assertions [2f04e6e]
Eventually and Consistently now allow their passed-in functions to make assertions. These assertions must pass or the function is considered to have failed and is retried.
Eventually and Consistently can now take functions with no return values. These implicitly return nil if they contain no failed assertion. Otherwise they return an error wrapping the first assertion failure. This allows these functions to be used with the Succeed() matcher.
Introduce InterceptGomegaFailure - an analogue to InterceptGomegaFailures - that captures the first assertion failure and halts execution in its passed-in callback.
Fixes
Call Verify GHTTPWithGomega receiver funcs (#454) [496e6fd]
Build a binary with an expected name (#446) [7356360]
1.13.0
Features
gmeasure provides BETA support for benchmarking (#447) [8f2dfbf]
Set consistently and eventually defaults on init (#443) [12eb778]
1.12.0
Features
Add Satisfy() matcher (#437) [c548f31]
tweak truncation message [3360b8c]
Add format.GomegaStringer (#427) [cc80b6f]
Add Clear() method to gbytes.Buffer [c3c0920]
Fixes
Fix error message in BeNumericallyMatcher (#432) [09c074a]
Bump github.com/onsi/ginkgo from 1.12.1 to 1.16.2 (#442) [e5f6ea0]
Bump github.com/golang/protobuf from 1.4.3 to 1.5.2 (#431) [adae3bf]
Bump golang.org/x/net (#441) [3275b35]
1.11.0
Features
feature: add index to gstruct element func (#419) [334e00d]
feat(gexec) Add CompileTest functions. Close #410 (#411) [47c613f]
Fixes
Check more carefully for nils in WithTransform (#423) [3c60a15]
fix: typo in Makefile [b82522a]
Allow WithTransform function to accept a nil value (#422) [b75d2f2]
fix: print value type for interface{} containers (#409) [f08e2dc]
fix(BeElementOf): consistently flatten expected values [1fa9468]

... (truncated)

Commits

812e642 v1.14.0
26cf82b silence (at least temporarily) the github test workflow's vetting of go.mod a...
496e6fd Call Verify GHTTPWithGomega receiver funcs (#454)
9da0d13 go mod tidy
55e9553 bump ginkgo
e94dbca gmeasure.SamplingConfig now suppers a MinSamplingInterval
2f04e6e Eventually and Consistently support functions that make assertions
febd7a2 remove travis ci
7356360 Build a binary with an expected name (#446)
dbc6ecd v1.13.0
Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

@dependabot rebase will rebase this PR
@dependabot recreate will recreate this PR, overwriting any edits that have been made to it
@dependabot merge will merge this PR after your CI passes on it
@dependabot squash and merge will squash and merge this PR after your CI passes on it
@dependabot cancel merge will cancel a previously requested merge and block automerging
@dependabot reopen will reopen this PR if it is closed
@dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
@dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
@dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Bumps [github.com/onsi/gomega](https://github.com/onsi/gomega) from 1.10.3 to 1.14.0. - [Release notes](https://github.com/onsi/gomega/releases) - [Changelog](https://github.com/onsi/gomega/blob/master/CHANGELOG.md) - [Commits](onsi/gomega@v1.10.3...v1.14.0) --- updated-dependencies: - dependency-name: github.com/onsi/gomega dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com>

dependabot · 2021-08-05T22:03:34Z

Superseded by #24.

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

dependabotBot added the dependencies Pull requests that update a dependency file label Jul 7, 2021

dependabotBot mentioned this pull request Jul 7, 2021
chore(deps): bump github.com/onsi/gomega from 1.10.3 to 1.13.0 #20
Closed

dependabotBot closed this Aug 5, 2021

dependabotBot deleted the dependabot/go_modules/github.com/onsi/gomega-1.14.0 branch August 5, 2021 22:03

Uh oh!

Conversation

dependabotBot commented on behalf of githubJul 7, 2021

v1.14.0

1.14.0

Features

Fixes

v1.13.0

v1.12.0

Features

Fixes

1.14.0

Features

Fixes

1.13.0

Features

1.12.0

Features

Fixes

1.11.0

Features

Fixes

Uh oh!

dependabotBot commented on behalf of githubAug 5, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

Uh oh!

Conversation

dependabotBot commented on behalf of githubJul 7, 2021

v1.14.0

1.14.0

Features

Fixes

v1.13.0

v1.12.0

Features

Fixes

1.14.0

Features

Fixes

1.13.0

Features

1.12.0

Features

Fixes

1.11.0

Features

Fixes

Uh oh!

dependabotBot commented on behalf of githubAug 5, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

Uh oh!

Conversation

dependabotBot commented on behalf of githubJul 7, 2021

v1.14.0

1.14.0

Features

Fixes

v1.13.0

v1.12.0

Features

Fixes

1.14.0

Features

Fixes