BranchesTags

Latest commit

History

13 Commits

Folders and files

NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py

Repository files navigation

buttplug.io Venus Controller

The Venus for Men by Sybian is one of the most expensive sex toys on the market.

This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.

It is geared towards the Lustbound game in particular.

lustbound_venus.mp4

Assembly

Microcontroller

Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).

Servo

I had a MG996R at hand, so I used that.

Frame

You need a 3D printer to print the controller frame (base and brackets) as well as the gears.

Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:

Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.

These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.

Usage

Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).

Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.

Start Lustbound.

Developer Notes

Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.

About

Controlling a Venus for Men via the buttplug protocol.

Topics

buttplug-serverbuttplugiosextoy

Resources

Readme
MIT license
Activity

Stars

3 stars

Watchers

0 watching

Forks

1 fork
Report repository

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Latest commit
History
13 Commits
Folders and files
NameName
Last commit message
Last commit date
controller
controller
media
media
models
models
LICENSE
LICENSE
README.md
README.md
lustbound.py
lustbound.py
Repository files navigation
buttplug.io Venus Controller
The Venus for Men by Sybian is one of the most expensive sex toys on the market.
This project allows you to control the Venus via the buttplug.io protocolwithout changing, hacking or breaking the toy's electronics.
It is geared towards the Lustbound game in particular.
lustbound_venus.mp4
Assembly
Microcontroller
Compile the code in the controller director and flash it on a microcontroller of your choice. I had a Raspberry Pi Pico at hand, but you can probably use any microcontroller. The provided code makes use of platformio and uses the Arduino framework, that should be the de-facto common ground. Wire the servo to whatever output pin you chose (I chose pin 34 for GP28 because that is close to GND and VBUS).
Servo
I had a MG996R at hand, so I used that.
Frame
You need a 3D printer to print the controller frame (base and brackets) as well as the gears.
Screw the gear onto the servo. Turn the control knob into the "off" position and carefully turn the servo into the opposite direction (because of the gears). Now stick the other gear over the control knom. This is what the end result should look like:
Disconnect the servo from the microcontroller (some models allegedly back-feed). Check mobility by carefully turning the servo all the way in both directions. If the servo blocks, but the knob still has some wriggle room in both directions, you did it right. Now connect the servo to the controller again.
These models have been prepared for a Bambulab X1C with PLA-CF. Adjustments might be necessary (especially fitting the control knob and the M4 screw holes). You can use FreeCAD to adjust the provided files. It is free.
Usage
Have websockets 13.1 and pyserial 3.5 installed in your python environment (via pip I presume).
Execute lustbound.py. The servo will turn the knob in the "off" position. If this breaks the gear, the knob or the servo, you installed it the wrong way around and must admit defeat.
Start Lustbound.
Developer Notes
Lustbound uses the deprecated version 2 of the protocol, making use of the old VibrateCmd instead of the current ScalarCmd.
About
Controlling a Venus for Men via the buttplug protocol.
Topics
buttplug-serverbuttplugiosextoy
Resources
Readme
MIT license
Activity
Stars
3 stars
Watchers
0 watching
Forks
1 fork
Report repository
Contributors
Languages