gh-85453: Adapt datetime.rst to devguide recommendations for code snippets and variables

Doc/library/datetime.rst

@@ -85,7 +85,7 @@ The :mod:`!datetime` module exports the following constants:
 .. data:: MINYEAR
 
  The smallest year number allowed in a :class:`date` or :class:`.datetime` object.
- :const:`MINYEAR` is ``1``.
+ :const:`MINYEAR` is 1.
 
 
 .. data:: MAXYEAR
@@ -207,7 +207,7 @@ A :class:`timedelta` object represents a duration, the difference between two
 
 .. class:: timedelta(days=0, seconds=0, microseconds=0, milliseconds=0, minutes=0, hours=0, weeks=0)
 
- All arguments are optional and default to ``0``. Arguments may be integers
+ All arguments are optional and default to 0. Arguments may be integers
  or floats, and may be positive or negative.
 
  Only *days*, *seconds* and *microseconds* are stored internally.
@@ -280,7 +280,7 @@ Class attributes:
  The smallest possible difference between non-equal :class:`timedelta` objects,
  ``timedelta(microseconds=1)``.
 
-Note that, because of normalization, ``timedelta.max`` > ``-timedelta.min``.
+Note that, because of normalization, ``timedelta.max`` is greater than ``-timedelta.min``.
 ``-timedelta.max`` is not representable as a :class:`timedelta` object.
 
 Instance attributes (read-only):
@@ -302,26 +302,27 @@ Supported operations:
 +--------------------------------+-----------------------------------------------+
 | Operation | Result |
 +================================+===============================================+
-| ``t1 = t2 + t3`` | Sum of *t2* and *t3*. Afterwards *t1*-*t2* == |
-| | *t3* and *t1*-*t3* == *t2* are true. (1) |
+| ``t1 = t2 + t3`` | Sum of ``t2`` and ``t3``. |
+| | Afterwards ``t1 - t2 == t3`` and |
+| | ``t1 - t3 == t2`` are true. (1) |
 +--------------------------------+-----------------------------------------------+
-| ``t1 = t2 - t3`` | Difference of *t2* and *t3*. Afterwards *t1* |
-| | == *t2* - *t3* and *t2* == *t1* + *t3* are |
+| ``t1 = t2 - t3`` | Difference of ``t2`` and ``t3``. Afterwards |
+| | ``t1 == t2 - t3`` and ``t2 == t1 + t3`` are |
 | | true. (1)(6) |
 +--------------------------------+-----------------------------------------------+
 | ``t1 = t2 * i or t1 = i * t2`` | Delta multiplied by an integer. |
-| | Afterwards *t1* // i == *t2* is true, |
+| | Afterwards ``t1 // i == t2`` is true, |
 | | provided ``i != 0``. |
 +--------------------------------+-----------------------------------------------+
-| | In general, *t1* \* i == *t1* \* (i-1) + *t1* |
+| | In general, ``t1 * i == t1 * (i-1) + t1``  |
 | | is true. (1) |
 +--------------------------------+-----------------------------------------------+
 | ``t1 = t2 * f or t1 = f * t2`` | Delta multiplied by a float. The result is |
 | | rounded to the nearest multiple of |
 | | timedelta.resolution using round-half-to-even.|
 +--------------------------------+-----------------------------------------------+
-| ``f = t2 / t3`` | Division (3) of overall duration *t2* by |
-| | interval unit *t3*. Returns a :class:`float`|
+| ``f = t2 / t3`` | Division (3) of overall duration ``t2`` by |
+| | interval unit ``t3``. Returns a :class:`float`|
 | | object. |
 +--------------------------------+-----------------------------------------------+
 | ``t1 = t2 / f or t1 = t2 / i`` | Delta divided by a float or an int. The result|
@@ -343,13 +344,12 @@ Supported operations:
 | ``+t1`` | Returns a :class:`timedelta` object with the |
 | | same value. (2) |
 +--------------------------------+-----------------------------------------------+
-| ``-t1`` | equivalent to |
-| | :class:`timedelta`\ (-*t1.days*, |
-| | -*t1.seconds*, -*t1.microseconds*), |
-| | and to *t1*\* -1. (1)(4) |
+| ``-t1`` | Equivalent to ``timedelta(-t1.days, |
+| | -t1.seconds*, -t1.microseconds)``, |
+| | and to ``t1 * -1``. (1)(4) |
 +--------------------------------+-----------------------------------------------+
-| ``abs(t)`` | equivalent to +\ *t* when ``t.days >= 0``, |
-| | and to -*t* when ``t.days < 0``. (2) |
+| ``abs(t)`` | Equivalent to ``+t`` when ``t.days >= 0``, |
+| | and to ``-t`` when ``t.days < 0``. (2) |
 +--------------------------------+-----------------------------------------------+
 | ``str(t)`` | Returns a string in the form |
 | | ``[D day[s], ][H]H:MM:SS[.UUUUUU]``, where D |
@@ -370,10 +370,10 @@ Notes:
  This is exact and cannot overflow.
 
 (3)
- Division by 0 raises :exc:`ZeroDivisionError`.
+ Division by zero raises :exc:`ZeroDivisionError`.
 
 (4)
--*timedelta.max* is not representable as a :class:`timedelta` object.
+``-timedelta.max`` is not representable as a :class:`timedelta` object.
 
 (5)
  String representations of :class:`timedelta` objects are normalized
@@ -583,10 +583,10 @@ Supported operations:
 +-------------------------------+----------------------------------------------+
 | Operation | Result |
 +===============================+==============================================+
-| ``date2 = date1 + timedelta`` | *date2* will be ``timedelta.days`` days |
-| | after *date1*. (1) |
+| ``date2 = date1 + timedelta`` | ``date2`` will be ``timedelta.days`` days |
+| | after ``date1``. (1) |
 +-------------------------------+----------------------------------------------+
-| ``date2 = date1 - timedelta`` | Computes *date2* such that ``date2 + |
+| ``date2 = date1 - timedelta`` | Computes ``date2`` such that ``date2 + |
 | | timedelta == date1``. (2) |
 +-------------------------------+----------------------------------------------+
 | ``timedelta = date1 - date2`` | \(3) |
@@ -613,8 +613,8 @@ Notes:
  ``timedelta.seconds`` and ``timedelta.microseconds`` are ignored.
 
 (3)
- This is exact, and cannot overflow. timedelta.seconds and
- timedelta.microseconds are 0, and date2 + timedelta == date1 after.
+ This is exact, and cannot overflow. ``timedelta.seconds`` and
+``timedelta.microseconds`` are 0, and ``date2 + timedelta == date1`` after.
 
 (4)
  :class:`date` objects are equal if they represent the same date.
@@ -671,7 +671,7 @@ Instance methods:
  time.struct_time((d.year, d.month, d.day, 0, 0, 0, d.weekday(), yday, -1))
 
  where ``yday = d.toordinal() - date(d.year, 1, 1).toordinal() + 1``
- is the day number within the current year starting with ``1`` for January 1st.
+ is the day number within the current year starting with 1 for January 1st.
 
 
 .. method:: date.toordinal()
@@ -991,8 +991,8 @@ Other constructors, all class methods:
 .. classmethod:: datetime.fromordinal(ordinal)
 
  Return the :class:`.datetime` corresponding to the proleptic Gregorian ordinal,
- where January 1 of year 1 has ordinal 1. :exc:`ValueError` is raised unless ``1
- <= ordinal <= datetime.max.toordinal()``. The hour, minute, second and
+ where January 1 of year 1 has ordinal 1. :exc:`ValueError` is raised unless
+``1 <= ordinal <= datetime.max.toordinal()``. The hour, minute, second and
  microsecond of the result are all 0, and :attr:`.tzinfo` is ``None``.
 
 
@@ -1167,8 +1167,8 @@ Instance attributes (read-only):
  In ``[0, 1]``. Used to disambiguate wall times during a repeated interval. (A
  repeated interval occurs when clocks are rolled back at the end of daylight saving
  time or when the UTC offset for the current zone is decreased for political reasons.)
- The value 0 (1) represents the earlier (later) of the two moments with the same wall
- time representation.
+ The values 0 and 1 represent, respectively, the earlier and later of the two
+moments with the same wall time representation.
 
  .. versionadded:: 3.6
 
@@ -1193,16 +1193,16 @@ Supported operations:
 +---------------------------------------+--------------------------------+
 
 (1)
- datetime2 is a duration of timedelta removed from datetime1, moving forward in
- time if ``timedelta.days`` > 0, or backward if ``timedelta.days`` < 0. The
+``datetime2`` is a duration of ``timedelta`` removed from ``datetime1``, moving forward in
+ time if ``timedelta.days > 0``, or backward if ``timedelta.days < 0``. The
  result has the same :attr:`~.datetime.tzinfo` attribute as the input datetime, and
- datetime2 - datetime1 == timedelta after. :exc:`OverflowError` is raised if
- datetime2.year would be smaller than :const:`MINYEAR` or larger than
+``datetime2 - datetime1 == timedelta`` after. :exc:`OverflowError` is raised if
+``datetime2.year`` would be smaller than :const:`MINYEAR` or larger than
  :const:`MAXYEAR`. Note that no time zone adjustments are done even if the
  input is an aware object.
 
 (2)
- Computes the datetime2 such that datetime2 + timedelta == datetime1. As for
+ Computes the ``datetime2`` such that ``datetime2 + timedelta == datetime1``. As for
  addition, the result has the same :attr:`~.datetime.tzinfo` attribute as the input
  datetime, and no time zone adjustments are done even if the input is aware.
 
@@ -1387,12 +1387,12 @@ Instance methods:
  d.weekday(), yday, dst))
 
  where ``yday = d.toordinal() - date(d.year, 1, 1).toordinal() + 1``
- is the day number within the current year starting with ``1`` for January
+ is the day number within the current year starting with 1 for January
  1st. The :attr:`~time.struct_time.tm_isdst` flag of the result is set according to the
  :meth:`dst` method: :attr:`.tzinfo` is ``None`` or :meth:`dst` returns
  ``None``, :attr:`!tm_isdst` is set to ``-1``; else if :meth:`dst` returns a
- non-zero value, :attr:`!tm_isdst` is set to ``1``; else :attr:`!tm_isdst` is
- set to ``0``.
+ non-zero value, :attr:`!tm_isdst` is set to 1; else :attr:`!tm_isdst` is
+ set to 0.
 
 
 .. method:: datetime.utctimetuple()
@@ -1404,7 +1404,7 @@ Instance methods:
  If *d* is aware, *d* is normalized to UTC time, by subtracting
  ``d.utcoffset()``, and a :class:`time.struct_time` for the
  normalized time is returned. :attr:`!tm_isdst` is forced to 0. Note
- that an :exc:`OverflowError` may be raised if *d*.year was
+ that an :exc:`OverflowError` may be raised if ``d.year`` was
  ``MINYEAR`` or ``MAXYEAR`` and UTC adjustment spills over a year
  boundary.
 
@@ -1735,7 +1735,7 @@ day, and subject to adjustment via a :class:`tzinfo` object.
  * ``fold in [0, 1]``.
 
  If an argument outside those ranges is given, :exc:`ValueError` is raised. All
- default to ``0`` except *tzinfo*, which defaults to :const:`None`.
+ default to 0 except *tzinfo*, which defaults to :const:`None`.
 
 Class attributes:
 
@@ -1790,8 +1790,8 @@ Instance attributes (read-only):
  In ``[0, 1]``. Used to disambiguate wall times during a repeated interval. (A
  repeated interval occurs when clocks are rolled back at the end of daylight saving
  time or when the UTC offset for the current zone is decreased for political reasons.)
- The value 0 (1) represents the earlier (later) of the two moments with the same wall
- time representation.
+ The values 0 and 1 represent, respectively, the earlier and later of the two
+moments with the same wall time representation.
 
  .. versionadded:: 3.6
 
@@ -2083,7 +2083,7 @@ Examples of working with a :class:`.time` object::
  ``tz.utcoffset(dt) - tz.dst(dt)``
 
  must return the same result for every :class:`.datetime` *dt* with ``dt.tzinfo ==
- tz`` For sane :class:`tzinfo` subclasses, this expression yields the time
+ tz``. For sane :class:`tzinfo` subclasses, this expression yields the time
  zone's "standard offset", which should not depend on the date or the time, but
  only on geographic location. The implementation of :meth:`datetime.astimezone`
  relies on this, but cannot detect violations; it's the programmer's
@@ -2120,7 +2120,7 @@ Examples of working with a :class:`.time` object::
  Return the time zone name corresponding to the :class:`.datetime` object *dt*, as
  a string. Nothing about string names is defined by the :mod:`!datetime` module,
  and there's no requirement that it mean anything in particular. For example,
- "GMT", "UTC", "-500", "-5:00", "EDT", "US/Eastern", "America/New York" are all
+``"GMT"``, ``"UTC"``, ``"-500"``, ``"-5:00"``, ``"EDT"``, ``"US/Eastern"``, ``"America/New York"`` are all
  valid replies. Return ``None`` if a string name isn't known. Note that this is
  a method rather than a fixed string primarily because some :class:`tzinfo`
  subclasses will wish to return different names depending on the specific value
@@ -2561,11 +2561,11 @@ information, which are supported in ``datetime.strptime`` but are discarded by
 
 For :class:`.time` objects, the format codes for year, month, and day should not
 be used, as :class:`!time` objects have no such values. If they're used anyway,
-``1900`` is substituted for the year, and ``1`` for the month and day.
+``1900`` is substituted for the year, and 1 for the month and day.
 
 For :class:`date` objects, the format codes for hours, minutes, seconds, and
 microseconds should not be used, as :class:`date` objects have no such
-values. If they're used anyway, ``0`` is substituted for them.
+values. If they're used anyway, 0 is substituted for them.
 
 For the same reason, handling of format strings containing Unicode code points
 that can't be represented in the charset of the current locale is also