Device Tree Changes for LT9611C by mohitdsor · Pull Request #763 · qualcomm-linux/kernel

mohitdsor · 2026-06-23T16:08:12Z

Device Tree Changes for LT9611C
CRs-Fixed: 4552827
Depends-on: #762

qswat-orbit-external · 2026-06-23T16:12:58Z

Merge Check Failed: No CR Numbers Found

Error: No Change Request numbers were found.

Please add Change Request numbers to your pull request description in the format CRs-Fixed: 12345 or link GitHub issues that are associated with Change Requests.

qswat-orbit-external · 2026-06-23T18:05:31Z

Merge Check Failed: No CR Numbers Found

Error: No Change Request numbers were found.

Please add Change Request numbers to your pull request description in the format CRs-Fixed: 12345 or link GitHub issues that are associated with Change Requests.

qswat-orbit-external · 2026-06-23T18:07:25Z

Merge Check Failed: CR Not Eligible for Merge

CR 4552827 is not eligible for merge.

The parent software image for kernel.qli.2.0 is not development complete.

Entity:kernel.qli.2.0
CR:4552827
Reason: CR_CANNOT_MERGE

Please ensure the CR passes both CCT (ComponentChangeTasks) and ICT (Integration Change Tasks) validations.

Salendarsingh Gaud (sgaud-quic)

Post patch Upstream and bring as FROMLIST

qlijarvis · 2026-06-27T19:21:44Z

PR #763 — validate-patch

PR:#763

Verdict	Issues	Detailed Report
⚠️	5	Full report

Final Summary

Lore link present: Yes — valid lore.kernel.org URL with proper message-ID format
Lore link matches PR commits: Cannot verify — network access restricted; lore.kernel.org unreachable for comparison
Upstream patch status: In review — PENDING: prefix indicates not yet merged; message-ID dated 2026-06-27 (4 days after patch authorship)
PR present in qcom-next: Not checked — no kernel tree access per constraints

Verdict: ⚠️ — click to expand
🔍 Patch Validation
PR:#763 - PENDING: arm64: dts: qcom: Shikra LT9611UXD support
Upstream commit:https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/ (cannot verify - network restricted)
Verdict:⚠️ PARTIAL
Commit Message
Check Status Note
Subject matches upstream ⚠️ Cannot verify - lore.kernel.org unreachable; PENDING: prefix indicates not yet merged
Body preserves rationale ⚠️ Minimal description; lacks detail on hardware configuration, pin assignments, or why changes are needed
Fixes tag present/correct N/A Not a fix; new hardware support
Authorship preserved ✅ Author: Mohit Dsor mohit.dsor@oss.qualcomm.com
Backport note (if applicable) N/A Not a backport; PENDING: prefix indicates under review upstream
Diff
File Status Notes
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts ⚠️ Spaces instead of tabs in &pm8150_l11 block (lines 140-143); trailing blank lines at EOF
Issues
Whitespace: The &pm8150_l11 regulator block uses spaces for indentation instead of tabs (DTS convention requires tabs)
Trailing whitespace: Two blank lines added at end of file (line 180-181) instead of single newline
Commit message: Body is too terse; should explain what hardware is being enabled, why these specific regulators/pins are needed, and reference the bridge driver
Date mismatch: Patch authored June 23, lore message-id dated June 27 (v1-5 suggests part of series; date difference expected but worth noting)
PENDING prefix: Indicates patch not yet accepted upstream; appropriate for review but signals work-in-progress status
Verdict
Requires minor fixes before merge: correct indentation in &pm8150_l11 block (tabs not spaces), remove trailing blank lines, and optionally expand commit message body with hardware context.
Final Summary
Lore link present: Yes — valid lore.kernel.org URL with proper message-ID format
Lore link matches PR commits: Cannot verify — network access restricted; lore.kernel.org unreachable for comparison
Upstream patch status: In review — PENDING: prefix indicates not yet merged; message-ID dated 2026-06-27 (4 days after patch authorship)
PR present in qcom-next: Not checked — no kernel tree access per constraints

qlijarvis · 2026-06-27T19:21:45Z

PR #763 — checker-log-analyzer

PR:#763
Checker run:https://github.com/qualcomm-linux/kernel-config/actions/runs/28298443164

Checker	Result	Summary
Checker	Result	Summary
checkpatch	❌	4 errors, 4 warnings, 2 checks: whitespace/indentation issues + undocumented compatible
dt-binding-check	⏭️	Skipped (no binding changes)
dtb-check	❌	Schema validation failure: `lontium,lt9611uxd` has no matching schema
sparse-check	⏭️	Skipped (no C code changes)
check-uapi-headers	⏭️	Skipped (no UAPI changes)
check-patch-compliance	❌	Subject prefix violation: "PENDING:" not allowed
tag-check	N/A	Not applicable for this PR
qcom-next-check	N/A	Not applicable (PENDING prefix)

Detailed report: Full report

Checker analysis — click to expand
🤖 CI Checker Analysis (checker-log-analyzer)
PR:#763 - PENDING: arm64: dts: qcom: Shikra LT9611UXD support
Source:https://github.com/qualcomm-linux/kernel-config/actions/runs/28298443164
Checker Result Summary
checkpatch ❌ 4 errors, 4 warnings, 2 checks: whitespace/indentation issues + undocumented compatible
dt-binding-check ⏭️ Skipped (no binding changes)
dtb-check ❌ Schema validation failure: lontium,lt9611uxd has no matching schema
sparse-check ⏭️ Skipped (no C code changes)
check-uapi-headers ⏭️ Skipped (no UAPI changes)
check-patch-compliance ❌ Subject prefix violation: "PENDING:" not allowed
tag-check N/A Not applicable for this PR
qcom-next-check N/A Not applicable (PENDING prefix)
❌ checkpatch
Root cause: Mixed use of spaces instead of tabs for indentation in &pm8150_l11 node (lines 541-544), plus multiple blank lines and undocumented compatible string.
Failure details:
WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented
#70: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:370:
+ compatible = "lontium,lt9611uxd";
CHECK: Please don't use multiple blank lines
#138: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:539:
ERROR: code indent should use tabs where possible
#140: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:541:
+ /* DSI VDDA - must be at NOM voltage for PHY PLL lock */
ERROR: code indent should use tabs where possible
#141: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:542:
+ regulator-min-microvolt = <1232000>;
WARNING: please, no spaces at the start of a line
#141: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:542:
+ regulator-min-microvolt = <1232000>;
ERROR: code indent should use tabs where possible
#142: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:543:
+ regulator-max-microvolt = <1232000>;
ERROR: code indent should use tabs where possible
#143: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:544:
+ regulator-allow-set-load;
CHECK: Please don't use multiple blank lines
#181: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:806:
Total: 4 errors, 4 warnings, 2 checks
Fix:
Replace spaces with tabs in the &pm8150_l11 block (lines 541-544 in the patch)
Remove extra blank lines at line 539 and line 806
The undocumented compatible warning is expected if the binding hasn't been merged yet (see dtb-check below)
Reproduce locally:
./scripts/checkpatch.pl --strict --summary-file --ignore FILE_PATH_CHANGES --git 8c49474603c0b1c278b8fe00ac4e735b92d78ce9..d088a35b9ce70817524a620fdadaea8fd1ebbd1b
❌ dtb-check
Root cause: The compatible string lontium,lt9611uxd has no matching device tree binding schema in Documentation/devicetree/bindings/.
Failure details:
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
Fix:
This PR adds device tree nodes for the LT9611UXD HDMI-DSI bridge, but the corresponding device tree binding documentation is missing. You need to either:
Add the binding first (recommended upstream approach):
Create Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml
Submit the binding as a separate patch before the DTS changes
Reference: The lore link in the commit message suggests this is part of a series
Or verify the binding exists upstream:
Check if the binding was already merged in mainline
If yes, ensure your tree is rebased on a version that includes it
Reproduce locally:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j$(nproc) CHECK_DTBS=y arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb
❌ check-patch-compliance
Root cause: Commit subject starts with "PENDING:" which is not an allowed prefix for the Qualcomm Linux kernel tree.
Failure details:
Checking commit: PENDING: arm64: dts: qcom: Shikra LT9611UXD support
Commit summary does not start with a required prefix
Fix:
Replace the "PENDING:" prefix with one of the allowed prefixes:
FROMLIST: - if the patch is posted to an upstream mailing list but not yet merged
UPSTREAM: - if the patch is already merged in mainline
BACKPORT: - if backporting from a newer kernel version
Or use the standard subsystem prefix: arm64: dts: qcom: shikra: Add LT9611UXD HDMI bridge support
Based on the lore link in the commit message (https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/), this appears to be posted upstream, so use:
FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Reproduce locally:
# Check the commit prefix policy
bash kernel-checkers/check-patch-compliance.sh --kernel-src . \
--base 8c49474603c0b1c278b8fe00ac4e735b92d78ce9 \
--head d088a35b9ce70817524a620fdadaea8fd1ebbd1b
Verdict
3 blockers must be fixed before merge:
Checkpatch whitespace errors - Replace spaces with tabs in &pm8150_l11 block and remove extra blank lines
Missing DT binding schema - Add Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml or verify it exists upstream
Invalid commit prefix - Change "PENDING:" to "FROMLIST:" (or appropriate prefix)
The checkpatch issues are trivial formatting fixes. The dtb-check failure indicates a missing binding document that should be added/merged before the DTS changes. The compliance check requires updating the commit subject prefix to follow Qualcomm kernel conventions.

qlijarvis · 2026-06-27T22:31:31Z

PR #763 — validate-patch

PR:#763

Verdict	Issues	Detailed Report
❌	6	Full report

Final Summary

Lore link present: No — FROMLIST prefix used but no Link: tag provided in commit message
Lore link matches PR commits: N/A — no lore link to compare against
Upstream patch status: Cannot determine — no lore link provided; searches on lore.kernel.org found no matching patch from this author
PR present in qcom-next: Not checked — validation blocked by missing upstream reference

Required Actions:

If posted upstream: Add Link: https://lore.kernel.org/r/<message-id> tag before Signed-off-by
If not posted upstream: Change FROMLIST: to QCLINUX: and remove Upstream-Status tag
Expand commit message body with technical rationale
Fix whitespace issues (trailing blank lines, inconsistent spacing)

Verdict: ❌ — click to expand
🔍 Patch Validation
PR:#763 - arm64: dts: qcom: Shikra LT9611UXD support
Upstream commit: N/A (no lore link provided)
Verdict: ❌ FAIL
Commit Message
Check Status Note
Subject matches upstream ❌ No lore link provided; cannot verify upstream match
Body preserves rationale ⚠️ Minimal description; no technical rationale for changes
Fixes tag present/correct N/A Not a fix commit
Authorship preserved ✅ Author: Mohit Dsor mohit.dsor@oss.qualcomm.com
Backport note (if applicable) ❌ FROMLIST prefix requires Link: tag to lore posting
Diff
File Status Notes
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts ⚠️ Cannot verify against upstream without lore link
Issues
Critical:
Missing lore link: Patch uses FROMLIST: prefix but provides no Link: tag pointing to the upstream posting on lore.kernel.org
Contradictory tags: FROMLIST: implies the patch is posted upstream for review, but Upstream-Status: Inappropriate [debug specific] suggests it's not intended for upstream
Incomplete commit message: Body contains only one line with no technical justification for the hardware enablement
Commit Message Requirements:
FROMLIST patches MUST include a Link: tag with the lore.kernel.org URL (e.g., Link: https://lore.kernel.org/r/<message-id>)
The commit body should explain what hardware is being enabled and why these specific DT nodes are needed
Either remove FROMLIST: and use QCLINUX: for vendor-only changes, OR provide the upstream lore link
Style Issues:
Extra blank lines at end of file (lines 807-808)
Inconsistent spacing before &pm8150_gpios block (double newline at line 538)
Mixed indentation style (spaces vs tabs) in &pm8150_l11 block (line 541)
Verdict
Reject — Patch cannot be validated without upstream lore link. The FROMLIST prefix requires a Link: tag to the mailing list posting. If this is vendor-specific debug code not intended for upstream, use QCLINUX: prefix instead and remove the Upstream-Status tag.
Final Summary
Lore link present: No — FROMLIST prefix used but no Link: tag provided in commit message
Lore link matches PR commits: N/A — no lore link to compare against
Upstream patch status: Cannot determine — no lore link provided; searches on lore.kernel.org found no matching patch from this author
PR present in qcom-next: Not checked — validation blocked by missing upstream reference
Required Actions:
If posted upstream: Add Link: https://lore.kernel.org/r/<message-id> tag before Signed-off-by
If not posted upstream: Change FROMLIST: to QCLINUX: and remove Upstream-Status tag
Expand commit message body with technical rationale
Fix whitespace issues (trailing blank lines, inconsistent spacing)

qlijarvis · 2026-06-27T22:31:33Z

PR #763 — checker-log-analyzer

PR:#763
Checker run:https://github.com/qualcomm-linux/kernel-config/actions/runs/28303023174

Checker	Result	Summary
Checker	Result	Summary
checkpatch	❌	4 errors, 4 warnings, 2 checks: whitespace/indentation issues
dt-binding-check	⏭️	Skipped - no changes in Documentation/devicetree/bindings
dtb-check	❌	Undocumented compatible string 'lontium,lt9611uxd'
sparse-check	⏭️	Skipped - no C code changes
check-uapi-headers	⏭️	Skipped - no UAPI header changes
check-patch-compliance	❌	Missing 'Link:' tag in commit message
tag-check	N/A	Not applicable for qcom-6.18.y branch
qcom-next-check	N/A	Not applicable for qcom-6.18.y branch

Detailed report: Full report

Checker analysis — click to expand
🤖 CI Checker Analysis (checker-log-analyzer)
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Source:https://github.com/qualcomm-linux/kernel-config/actions/runs/28303023174
Checker Result Summary
checkpatch ❌ 4 errors, 4 warnings, 2 checks: whitespace/indentation issues
dt-binding-check ⏭️ Skipped - no changes in Documentation/devicetree/bindings
dtb-check ❌ Undocumented compatible string 'lontium,lt9611uxd'
sparse-check ⏭️ Skipped - no C code changes
check-uapi-headers ⏭️ Skipped - no UAPI header changes
check-patch-compliance ❌ Missing 'Link:' tag in commit message
tag-check N/A Not applicable for qcom-6.18.y branch
qcom-next-check N/A Not applicable for qcom-6.18.y branch
❌ checkpatch
Root cause: Whitespace and indentation errors in arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:541-544
Failure details:
ERROR: code indent should use tabs where possible
#140: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:541:
+ /* DSI VDDA - must be at NOM voltage for PHY PLL lock */$
ERROR: code indent should use tabs where possible
#141: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:542:
+ regulator-min-microvolt = <1232000>;$
WARNING: please, no spaces at the start of a line
#141: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:542:
+ regulator-min-microvolt = <1232000>;$
ERROR: code indent should use tabs where possible
#142: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:543:
+ regulator-max-microvolt = <1232000>;$
ERROR: code indent should use tabs where possible
#143: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:544:
+ regulator-allow-set-load;$
CHECK: Please don't use multiple blank lines
#138: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:539:
+
+
CHECK: Please don't use multiple blank lines
#183: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:808:
+
+
WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented
Fix:
Replace spaces with tabs in lines 541-544 of the &pm8150_l11 block
Remove extra blank lines at lines 539 and 808
Document the compatible string (see dtb-check fix below)
Reproduce locally:
./scripts/checkpatch.pl --strict --summary-file --ignore FILE_PATH_CHANGES --git 8c49474603c0b1c278b8fe00ac4e735b92d78ce9..HEAD
❌ dtb-check
Root cause: Compatible string lontium,lt9611uxd is not documented in device tree bindings
Failure details:
/opt/actions-runner/_work/kernel-config/kernel-config/kernel/temp-out/arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtb: i2c@4a90000 (qcom,geni-i2c): 'lt,lt9611uxd@41' does not match any of the regexes: ...
arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt,lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
Fix:
Add device tree binding documentation for lontium,lt9611uxd in Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml
OR use the existing documented compatible string if one exists (check Documentation/devicetree/bindings/display/bridge/ for similar Lontium chips like lt9611 or lt9611uxc)
If this is a variant of an existing chip, consider using the base compatible as a fallback
Reproduce locally:
make O=temp-out defconfig
make O=temp-out CHECK_DTBS=y qcom/shikra-iqs-evk.dtb
❌ check-patch-compliance
Root cause: Commit message missing required Link: tag for FROMLIST commits
Failure details:
Checking commit: FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
No 'Link' found in commit message
Fix:
Add a Link: tag to the commit message pointing to the upstream mailing list submission. The commit message should follow this format:
FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Device tree changes to support lt9611uxd hdmi-dsi driver.
Link: https://lore.kernel.org/...
Upstream-Status: Inappropriate [debug specific]
Signed-off-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
If the patch hasn't been submitted upstream yet, consider using DOWNSTREAM: prefix instead of FROMLIST:, or submit it upstream first.
Reproduce locally:
git log -1 --format=%B | grep -q "^Link:"||echo"Missing Link tag"
Verdict
3 blockers must be fixed before merge:
checkpatch - Fix whitespace/indentation (use tabs, remove extra blank lines)
dtb-check - Document the lontium,lt9611uxd compatible string or use existing documented compatible
check-patch-compliance - Add Link: tag to commit message or change prefix from FROMLIST: to DOWNSTREAM:
The fixes are straightforward: clean up whitespace, add DT binding documentation, and update the commit message with proper tags.

Komal Bajaj (Komal-Bajaj) · 2026-06-29T10:32:29Z

 output-high;
 	};
 };
+


remove extra lines

Salendarsingh Gaud (sgaud-quic) · 2026-06-29T10:51:54Z

No link in commit log

qlijarvis · 2026-06-29T14:27:15Z

PR #763 — validate-patch

PR:#763

Verdict	Issues	Detailed Report
❌	0	Full report

Final Summary

Lore link present: Yes — Link tag points to lore.kernel.org message-ID (v1 series, patch 5)
Lore link matches PR commits: Cannot verify — Network access restricted; unable to fetch upstream patch for comparison
Upstream patch status: Unknown — Cannot determine acceptance status due to network restrictions; message-ID format suggests recent v1 submission (2026-06-27), likely still in review
PR present in qcom-next: Not checked — No kernel tree access per task constraints

Verdict: ❌ — click to expand
🔍 Patch Validation
PR:#763 - arm64: dts: qcom: Shikra LT9611UXD support
Upstream commit:https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/
Verdict: ❌ FAIL
Commit Message
Check Status Note
Subject matches upstream ⚠️ Cannot verify - network restricted; subject format acceptable but could be more specific
Body preserves rationale ❌ Body is too brief: "Device tree changes to support lt9611uxd hdmi-dsi driver." Missing hardware details, board context, and change explanation
Fixes tag present/correct N/A New feature, not a fix
Authorship preserved ❌ Author mismatch: From: Vishnu Saini but first SoB: Mohit Dsor. Original author should be in From: field
Backport note (if applicable) N/A Appears to be new upstream submission (v1 series)
Diff
File Status Notes
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:23 ❌ Critical indentation error: hdmi-connector, vreg_lt9611_vcc, vreg_lt9611_vdd nodes inserted at wrong nesting level (1 tab vs 3 tabs expected based on context)
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:93 ✅ i2c4 node properly formatted
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:131 ✅ mdss/dsi nodes properly formatted
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:150 ✅ pm8150 nodes properly formatted
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:165 ✅ tlmm pinctrl nodes properly formatted
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:183 ⚠️ uart0 enablement - unrelated to LT9611UXD HDMI bridge; should be separate commit or explained in commit message
Issues
Critical:
Indentation corruption (lines 23-52): The hdmi-connector and two regulator nodes are inserted at the root level (1 tab indent) when they should be nested inside the parent node at 3-tab indent level. The context line shows sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; at 4-tab indent, followed by closing braces, suggesting these new nodes should be siblings at the same parent level, not at root.
Authorship mismatch: Patch From: field lists Vishnu Saini, but first Signed-off-by: is Mohit Dsor. Per kernel DCO rules, the author (From:) must match the first SoB. If Mohit is the original author, the From: field should be From: Mohit Dsor with Vishnu's SoB second (indicating he applied/forwarded the patch).
Major:
3. Insufficient commit body: The description "Device tree changes to support lt9611uxd hdmi-dsi driver" lacks essential context:
What hardware is being enabled (LT9611UXD HDMI-to-DSI bridge)
Which board (Shikra IQS EVK)
What functionality is added (HDMI output via DSI0)
Component summary (regulators, I2C device, MDSS/DSI config, pinctrl)
Minor:
4. Unrelated change: uart0 enablement (line 183) is not explained in the commit message and appears unrelated to HDMI bridge support. Should either be removed or explained.
Subject could be more specific: Current: "arm64: dts: qcom: Shikra LT9611UXD support"
Better: "arm64: dts: qcom: shikra-iqs-evk: Add LT9611UXD HDMI bridge support"
Verdict
Reject - The patch contains a critical indentation error that will cause DTS compilation failure or incorrect device tree structure. The authorship must be corrected to comply with kernel DCO requirements. The commit message needs substantial improvement to meet upstream standards.
Final Summary
Lore link present: Yes — Link tag points to lore.kernel.org message-ID (v1 series, patch 5)
Lore link matches PR commits: Cannot verify — Network access restricted; unable to fetch upstream patch for comparison
Upstream patch status: Unknown — Cannot determine acceptance status due to network restrictions; message-ID format suggests recent v1 submission (2026-06-27), likely still in review
PR present in qcom-next: Not checked — No kernel tree access per task constraints

qlijarvis · 2026-06-29T14:27:17Z

PR #763 — checker-log-analyzer

PR:#763
Checker run:https://github.com/qualcomm-linux/kernel-config/actions/runs/28376598217

Checker	Result	Summary
Checker	Result	Summary
checkpatch	⚠️	1 warning: undocumented DT compatible string
dt-binding-check	✅	No DT binding changes
dtb-check	❌	Failed to match schema for lt9611uxd; sound card validation error
sparse-check	⏭️	Skipped (no C code changes)
check-uapi-headers	⏭️	Skipped (no UAPI changes)
check-patch-compliance	❌	Missing required subject prefix (UPSTREAM:/FROMLIST:)
tag-check	N/A	Not applicable for this branch
qcom-next-check	❌	Requires FROMLIST:/UPSTREAM: prefix

Detailed report: Full report

Checker analysis — click to expand
🤖 CI Checker Analysis (checker-log-analyzer)
PR:#763 - arm64: dts: qcom: Shikra LT9611UXD support
Source:https://github.com/qualcomm-linux/kernel-config/actions/runs/28376598217
Checker Result Summary
checkpatch ⚠️ 1 warning: undocumented DT compatible string
dt-binding-check ✅ No DT binding changes
dtb-check ❌ Failed to match schema for lt9611uxd; sound card validation error
sparse-check ⏭️ Skipped (no C code changes)
check-uapi-headers ⏭️ Skipped (no UAPI changes)
check-patch-compliance ❌ Missing required subject prefix (UPSTREAM:/FROMLIST:)
tag-check N/A Not applicable for this branch
qcom-next-check ❌ Requires FROMLIST:/UPSTREAM: prefix
❌ checkpatch
Root cause: The compatible string lontium,lt9611uxd is used in the DTS but lacks corresponding documentation in Documentation/devicetree/bindings/.
Failure details:
WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented -- check ./Documentation/devicetree/bindings/
#64: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:489:
+ compatible = "lontium,lt9611uxd";
09c6dfb04e219bd7542d85f2eca1830bf346230f total: 0 errors, 1 warnings, 0 checks, 140 lines checked
Fix:
Ensure the DT binding for lontium,lt9611uxd exists in Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml (or similar path)
If the binding is being added in a separate patch/series, this warning can be ignored if the binding patch is merged first
The lore link in the commit message (https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/) suggests this is part of a series - verify the binding patch is included
Reproduce locally:
./scripts/checkpatch.pl --strict --summary-file --ignore FILE_PATH_CHANGES --git 8c49474603c0b1c278b8fe00ac4e735b92d78ce9..08b1575c1204e4124212c50884eb96cc6650980f
❌ dtb-check
Root cause: Two validation failures:
The lontium,lt9611uxd compatible string has no matching DT schema
The sound card node has unexpected child nodes (hdmi-connector, regulator-lt9611-vcc, regulator-lt9611-vdd) that don't match the qcom,sm8250.yaml schema pattern
Failure details:
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
/opt/actions-runner/_work/kernel-config/kernel-config/kernel/temp-out/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: sound (qcom,shikra-iqs-sndcard): va-dmic-dai-link: 'hdmi-connector', 'regulator-lt9611-vcc', 'regulator-lt9611-vdd' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
Fix:
Missing schema: Add or ensure the DT binding schema for lontium,lt9611uxd exists at Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml
Sound card validation: The regulators and hdmi-connector nodes are being added as children of the sound card node, but they should be top-level nodes in the root of the device tree (not under the sound card). Move these nodes:
hdmi-connector should be at root level (already is in the patch)
vreg_lt9611_vcc should be at root level (already is in the patch)
vreg_lt9611_vdd should be at root level (already is in the patch)
The issue appears to be that the patch has incorrect indentation - the nodes are being added inside the sound card's va-dmic-dai-link section instead of at the root level. Check lines around the hdmi-connector node in the patch.
Reproduce locally:
# Build DTBs with validation
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml
# Or check specific DTB
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- CHECK_DTBS=y arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb
❌ check-patch-compliance
Root cause: The commit subject line does not start with a required prefix (UPSTREAM: or FROMLIST:).
Failure details:
Checking commit: arm64: dts: qcom: Shikra LT9611UXD support
Commit summary does not start with a required prefix
Fix:
The commit message references a lore.kernel.org link, indicating this is a patch from an upstream mailing list. Update the commit subject to include the appropriate prefix:
If the patch is already merged upstream: UPSTREAM: arm64: dts: qcom: Shikra LT9611UXD support
If the patch is posted to a mailing list but not yet merged: FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Based on the lore link (https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/), this appears to be a FROMLIST patch.
Reproduce locally:
# Check the commit message format
git log --oneline 8c49474603c0b1c278b8fe00ac4e735b92d78ce9..da1ce885728f5f47eab00d488d7013caa6e21892
Verdict
3 blockers must be fixed before merge:
Critical: Fix DTS indentation issue causing sound card schema validation failure (dtb-check)
Critical: Add FROMLIST: or UPSTREAM: prefix to commit subject (check-patch-compliance)
Dependency: Ensure the lontium,lt9611uxd DT binding schema is present or merged first (checkpatch + dtb-check)
The patch appears to be part of a series (v1-5 from the lore link). Verify that the DT binding patch (likely v1-1 through v1-4) is included in this PR or has already been merged to the target branch.

qlijarvis · 2026-06-29T15:10:23Z

PR #763 — validate-patch

PR:#763

Verdict	Issues	Detailed Report
⚠️	0	Full report

Final Summary

Lore link present: Yes - Link tag points to https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/
Lore link matches PR commits: Cannot verify - network restrictions prevent fetching upstream patch; unable to compare diff, subject, or authorship
Upstream patch status: Cannot determine - lore.kernel.org unreachable; FROMLIST prefix indicates patch was posted to mailing list but acceptance status unknown
PR present in qcom-next: Not checked - no kernel tree access per task constraints

Verdict: ⚠️ — click to expand
🔍 Patch Validation
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Upstream commit:https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/
Verdict:⚠️ PARTIAL
Commit Message
Check Status Note
Subject matches upstream ⚠️ Cannot verify - lore.kernel.org unreachable due to network restrictions
Body preserves rationale ⚠️ Body is minimal ("Device tree changes to support lt9611uxd hdmi-dsi driver") - typical for DT patches but lacks detail
Fixes tag present/correct N/A Not a fix; new feature addition
Authorship preserved ⚠️ Cannot verify against upstream; dual sign-off present (Mohit Dsor → Vishnu Saini)
Backport note (if applicable) N/A FROMLIST prefix indicates not yet upstream
Diff
File Status Notes
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:23-51 ❌ Critical indentation error: hdmi-connector and regulator nodes use single-tab indent but are inserted between triple-indented sound nodes - breaks DT hierarchy
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:60-96 ✅ i2c4 node and lt9611uxd device properly formatted
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:98-108 ✅ mdss/dsi nodes correctly structured
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:110-120 ✅ pm8150 gpio and regulator config looks correct
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:140-152 ✅ tlmm pinctrl nodes properly formatted
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:154-156 ⚠️ uart0 enablement - unrelated to HDMI/DSI bridge; should be separate commit or explained
Issues
Critical:
Indentation/hierarchy error (lines 23-51): The hdmi-connector, vreg_lt9611_vcc, and vreg_lt9611_vdd nodes are inserted with incorrect indentation. They appear between a closing }; at line 22 (ending a sound-dai node with 3-tab indent) and a platform { node at line 54 (also 3-tab indent). The new nodes use only 1-tab indent, suggesting they should be at root level but are placed in the wrong location. This will likely cause DT compilation errors or incorrect device tree structure.
Minor:
2. Unrelated change: The &uart0 enablement (lines 154-156) is unrelated to LT9611UXD HDMI-DSI bridge support. Per kernel patch guidelines, unrelated changes should be in separate commits.
Commit message lacks detail: The body only states "Device tree changes to support lt9611uxd hdmi-dsi driver" without explaining what hardware is being enabled, why, or any relevant context (e.g., "Enable LT9611UXD HDMI-to-DSI bridge on Shikra IQS EVK to support HDMI output via DSI0").
Cannot verify:
4. Network restrictions prevent fetching the upstream patch from lore.kernel.org to verify diff faithfulness, subject line accuracy, or authorship chain.
Verdict
Do not merge as-is. The indentation error at lines 23-51 is a critical structural defect that will break the device tree. The patch must be corrected to place the hdmi-connector and regulator nodes at the proper hierarchy level (likely as root-level nodes under / with single-tab indent, but the context suggests they may need to be elsewhere). Additionally, the uart0 change should be split into a separate commit or justified in the commit message.
Final Summary
Lore link present: Yes - Link tag points to https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/
Lore link matches PR commits: Cannot verify - network restrictions prevent fetching upstream patch; unable to compare diff, subject, or authorship
Upstream patch status: Cannot determine - lore.kernel.org unreachable; FROMLIST prefix indicates patch was posted to mailing list but acceptance status unknown
PR present in qcom-next: Not checked - no kernel tree access per task constraints

qlijarvis · 2026-06-29T15:10:24Z

PR #763 — checker-log-analyzer

PR:#763
Checker run:https://github.com/qualcomm-linux/kernel-config/actions/runs/28380038533

Checker	Result	Summary
Checker	Result	Summary
checkpatch	❌	WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented
dt-binding-check	⏭️	Skipped - no changes in Documentation/devicetree/bindings
dtb-check	❌	Failed to match schema for "lontium,lt9611uxd" + sound card schema violation
sparse-check	⏭️	Skipped - no C code changes
check-uapi-headers	⏭️	Skipped - no UAPI header changes
check-patch-compliance	❌	Author mismatch: original author vs commit author
tag-check	✅	FROMLIST: prefix present
qcom-next-check	✅	FROMLIST: commit compliant

Detailed report: Full report

Checker analysis — click to expand
🤖 CI Checker Analysis (checker-log-analyzer)
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Source:https://github.com/qualcomm-linux/kernel-config/actions/runs/28380038533
Checker Result Summary
checkpatch ❌ WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented
dt-binding-check ⏭️ Skipped - no changes in Documentation/devicetree/bindings
dtb-check ❌ Failed to match schema for "lontium,lt9611uxd" + sound card schema violation
sparse-check ⏭️ Skipped - no C code changes
check-uapi-headers ⏭️ Skipped - no UAPI header changes
check-patch-compliance ❌ Author mismatch: original author vs commit author
tag-check ✅ FROMLIST: prefix present
qcom-next-check ✅ FROMLIST: commit compliant
❌ checkpatch
Root cause: The DT compatible string lontium,lt9611uxd is used in the device tree but lacks corresponding documentation in Documentation/devicetree/bindings/.
Failure details:
WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented -- check ./Documentation/devicetree/bindings/
#64: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:489:
+ compatible = "lontium,lt9611uxd";
Fix: This is a FROMLIST patch, so the binding documentation should exist in the upstream series. Verify that:
The binding document exists in the upstream patch series on lore (link: https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/)
If this is part of a multi-patch series, ensure the binding patch is applied before the DTS patch
If the binding is already upstream, cherry-pick it first
Reproduce locally:
./scripts/checkpatch.pl --strict --summary-file --ignore FILE_PATH_CHANGES --git 8c49474603c0b1c278b8fe00ac4e735b92d78ce9..005adf5a2c10ec0fae9338806f05028706e2dd10
❌ dtb-check
Root cause: Two schema validation failures: (1) no DT binding schema found for lontium,lt9611uxd, and (2) the sound card schema (qcom,sm8250.yaml) does not allow hdmi-connector, regulator-lt9611-vcc, and regulator-lt9611-vdd as top-level nodes under the sound card.
Failure details:
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
/opt/actions-runner/_work/kernel-config/kernel-config/kernel/temp-out/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: sound (qcom,shikra-iqs-sndcard): va-dmic-dai-link: 'hdmi-connector', 'regulator-lt9611-vcc', 'regulator-lt9611-vdd' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
Fix:
For the lt9611uxd schema failure: Same as checkpatch - ensure the DT binding for lontium,lt9611uxd is present. Check the upstream series and apply the binding patch first.
For the sound card schema failure: The nodes hdmi-connector, regulator-lt9611-vcc, and regulator-lt9611-vdd are incorrectly placed. Looking at the patch structure in pr.patch:93-122, these nodes appear to be indented incorrectly - they should be at the root level (under /), not under the sound card node. The patch shows incorrect indentation starting at line 93 where hdmi-connector is added inside the sound card's va-dmic-dai-link section instead of at the root level.
Reproduce locally:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- CHECK_DTBS=y qcom/shikra-iqs-evk.dtb
❌ check-patch-compliance
Root cause: The commit author (Vishnu Saini <vishnu.saini@oss.qualcomm.com>) does not match the original patch author from the lore link (Mohit Dsor <mohit.dsor@oss.qualcomm.com>).
Failure details:
Author mismatch:
Original author: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
Commit author : Vishnu Saini <vishnu.saini@oss.qualcomm.com>
Fix: When applying patches from upstream, preserve the original author. Use one of these approaches:
If applying with git am: The author is preserved automatically
If cherry-picking: Use git cherry-pick -x <commit>
If manually applying: Use git commit --author="Mohit Dsor <mohit.dsor@oss.qualcomm.com>"
To fix this commit:
git commit --amend --author="Mohit Dsor <mohit.dsor@oss.qualcomm.com>"
Then add Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com> as a co-developer sign-off in the commit message body.
Reproduce locally:
git log --format="%an <%ae>" HEAD~1..HEAD
# Compare with the lore link author
Verdict
3 blockers must be fixed before merge:
Critical DT structure issue: The hdmi-connector and regulator nodes are incorrectly nested inside the sound card node instead of being at the root level. This is a structural error in the patch itself.
Missing DT binding: Apply the lontium,lt9611uxd binding documentation patch from the upstream series before this DTS patch.
Author attribution: Preserve the original author (Mohit Dsor) and add co-developer sign-offs as needed.

qlijarvis · 2026-06-29T16:05:35Z

PR #763 — validate-patch

PR:#763

Verdict	Issues	Detailed Report
❌	0	Full report

Final Summary

Lore link present: Yes - Link tag points to lore.kernel.org message-ID 20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com
Lore link matches PR commits: Cannot verify - network access restricted; unable to fetch upstream patch for comparison
Upstream patch status: Cannot determine - network access restricted; FROMLIST prefix indicates patch is posted but not yet merged
PR present in qcom-next: Not checked - no kernel tree access per constraints

Verdict: ❌ — click to expand
🔍 Patch Validation
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Upstream commit:https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/
Verdict: ❌ FAIL
Commit Message
Check Status Note
Subject matches upstream ⚠️ Cannot verify - network restricted; subject format is valid
Body preserves rationale ⚠️ Minimal description; lacks detail on hardware integration
Fixes tag present/correct N/A Not a fix; new feature addition
Authorship preserved ✅ Author: Mohit Dsor mohit.dsor@oss.qualcomm.com
Backport note (if applicable) N/A FROMLIST prefix present; Link tag included
Diff
File Status Notes
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:23-51 ❌ Critical: Incorrect indentation - new top-level nodes use 1 tab but should match parent context (appears to be 3+ tabs based on surrounding platform node)
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:485-524 ✅ i2c4 node addition looks structurally correct
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:526-540 ✅ mdss/dsi nodes look correct
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:542-548 ✅ pm8150_gpios pinctrl addition looks correct
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:550-555 ✅ pm8150_l11 regulator config looks correct
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:700-716 ✅ tlmm pinctrl additions look correct
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:718-720 ⚠️ uart0 enablement - unrelated to LT9611UXD; should be separate commit
Issues
Critical:
Indentation mismatch at lines 23-51: The three new top-level device nodes (hdmi-connector, vreg_lt9611_vcc, vreg_lt9611_vdd) are inserted with single-tab indentation, but the surrounding context shows they should be indented to match the parent scope. The following platform { node has 3-tab indentation, suggesting these new nodes are at the wrong nesting level or incorrectly indented.
Minor:
2. Scope creep: The &uart0 enablement (lines 718-720) is unrelated to LT9611UXD HDMI bridge support and should be in a separate commit.
3. Commit message brevity: The body "Device tree changes to support lt9611uxd hdmi-dsi driver" is too terse. A proper upstream commit would explain what hardware is being enabled, why, and provide context (e.g., "Enable the Lontium LT9611UXD HDMI-to-DSI bridge on Shikra IQS EVK, connecting DSI0 to an HDMI type-A connector. Add required regulators and pinctrl configuration.").
Verdict
Reject - The patch contains a critical indentation error that will break the device tree structure. The new nodes at lines 23-51 must be re-indented to match the correct parent scope. Additionally, the unrelated uart0 change should be split into a separate commit.
Final Summary
Lore link present: Yes - Link tag points to lore.kernel.org message-ID 20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com
Lore link matches PR commits: Cannot verify - network access restricted; unable to fetch upstream patch for comparison
Upstream patch status: Cannot determine - network access restricted; FROMLIST prefix indicates patch is posted but not yet merged
PR present in qcom-next: Not checked - no kernel tree access per constraints

qlijarvis · 2026-06-29T16:05:37Z

PR #763 — checker-log-analyzer

PR:#763
Checker run:https://github.com/qualcomm-linux/kernel-config/actions/runs/28383679848

Checker	Result	Summary
Checker	Result	Summary
checkpatch	❌	1 warning: undocumented DT compatible string
dt-binding-check	⏭️	No binding changes in this PR
dtb-check	❌	Schema validation failures for lt9611uxd device
sparse-check	⏭️	Skipped (DTS-only patch)
check-uapi-headers	⏭️	Skipped (no UAPI changes)
check-patch-compliance	✅	Passed
tag-check	✅	FROMLIST: prefix present
qcom-next-check	✅	FROMLIST: commit compliant

Detailed report: Full report

Checker analysis — click to expand
🤖 CI Checker Analysis (checker-log-analyzer)
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Source:https://github.com/qualcomm-linux/kernel-config/actions/runs/28383679848
Checker Result Summary
checkpatch ❌ 1 warning: undocumented DT compatible string
dt-binding-check ⏭️ No binding changes in this PR
dtb-check ❌ Schema validation failures for lt9611uxd device
sparse-check ⏭️ Skipped (DTS-only patch)
check-uapi-headers ⏭️ Skipped (no UAPI changes)
check-patch-compliance ✅ Passed
tag-check ✅ FROMLIST: prefix present
qcom-next-check ✅ FROMLIST: commit compliant
❌ checkpatch
Root cause: The compatible string "lontium,lt9611uxd" used in arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:489 is not documented in Documentation/devicetree/bindings/.
Failure details:
WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented -- check ./Documentation/devicetree/bindings/
#64: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:489:
+ compatible = "lontium,lt9611uxd";
77e937dcab265ff02a8d1a6f82f0d4426ab25f64 total: 0 errors, 1 warnings, 0 checks, 140 lines checked
Fix: This is expected for a FROMLIST patch. The device tree binding documentation should be submitted upstream first (or as part of the same series). Verify that:
The upstream lore link (https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/) includes the binding documentation in an earlier patch of the series
The binding has been reviewed/accepted upstream before merging this DTS change
Reproduce locally:
./scripts/checkpatch.pl --strict --summary-file --ignore FILE_PATH_CHANGES --git 8c49474603c0b1c278b8fe00ac4e735b92d78ce9..09c1fbd17efcfaf13e017cca328e91dd6cf1e118
❌ dtb-check
Root cause: The device tree blob validation fails because the schema for "lontium,lt9611uxd" is missing, and the sound card node has additional child nodes that don't match the expected schema pattern.
Failure details:
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
/opt/actions-runner/_work/kernel-config/kernel-config/kernel/temp-out/arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: sound (qcom,shikra-iqs-sndcard): va-dmic-dai-link: 'hdmi-connector', 'regulator-lt9611-vcc', 'regulator-lt9611-vdd' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
Analysis:
Missing schema for lt9611uxd: The DT schema validation cannot find a binding for lontium,lt9611uxd. This is expected for FROMLIST patches where the binding hasn't been merged yet.
Sound card schema violation: The sound card node (qcom,shikra-iqs-sndcard) is adding three new top-level child nodes (hdmi-connector, regulator-lt9611-vcc, regulator-lt9611-vdd) at the wrong level. According to the error, these nodes don't match the expected pattern ^pinctrl-[0-9]+$ for additional properties under the sound card node.
Fix:
For the lt9611uxd schema issue:
This is expected for FROMLIST patches. The binding documentation must be submitted and ideally accepted upstream first.
Verify the upstream series includes the binding YAML file (likely Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml)
For the sound card schema issue:
The three nodes (hdmi-connector, regulator-lt9611-vcc, regulator-lt9611-vdd) should NOT be children of the sound card node
These should be top-level nodes under the root / node, not nested under sound
Looking at the patch, the indentation appears incorrect. The nodes starting at line 93 (hdmi-connector), line 105 (vreg_lt9611_vcc), and line 117 (vreg_lt9611_vdd) are indented as if they're children of the sound card, but they should be at the same level as the sound card itself
Correct structure should be:
/ {
sound {
...
};
hdmi-connector {
...
};
vreg_lt9611_vcc: regulator-lt9611-vcc {
...
};
vreg_lt9611_vdd: regulator-lt9611-vdd {
...
};
};
Reproduce locally:
# Build with dtbs_check enabled
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- CHECK_DTBS=y qcom/shikra-iqs-evk.dtb
Verdict
2 blockers must be fixed before merge:
Critical: DTS indentation/structure error - The hdmi-connector, regulator-lt9611-vcc, and regulator-lt9611-vdd nodes are incorrectly nested under the sound card node. They must be moved to the root level of the device tree.
Expected for FROMLIST: Missing binding documentation - The lontium,lt9611uxd compatible string lacks documentation. Verify the upstream series includes the binding YAML in an earlier patch. This is acceptable for FROMLIST patches if the binding is part of the same upstream series.
Action required: Fix the DTS structure by correcting the indentation of the three regulator/connector nodes to be root-level nodes, not children of the sound card.

Salendarsingh Gaud (sgaud-quic) · 2026-06-30T06:08:23Z

Mainline PR is not yet merged :
qualcomm-linux/kernel-topics#1428

qcomlnxci · 2026-06-30T07:03:31Z

Test jobs on 77e937d

qcomlnxci · 2026-06-30T07:03:35Z

Test Matrix

Test Case	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3	x1e80100-crd
BT_FW_KMD_Service	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
BT_ON_OFF	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
BT_SCAN	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
CPUFreq_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
CPU_affinity	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
DSP_AudioPD	✅ Pass	✅ Pass	⚠️ skip	✅ Pass	✅ Pass	⚠️ skip	◻️
Ethernet	⚠️ skip	✅ Pass	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	◻️
Freq_Scaling	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
GIC	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
IPA	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
Interrupts	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
OpenCV	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
PCIe	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
Probe_Failure_Check	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️
RMNET	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
UFS_Validation	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
USBHost	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️
WiFi_Firmware_Driver	❌ Fail	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
WiFi_OnOff	✅ Pass	❌ Fail	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
adsp_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	❌ Fail	◻️
cdsp_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	❌ Fail	◻️
gpdsp_remoteproc	✅ Pass	✅ Pass	⚠️ skip	⚠️ skip	✅ Pass	❌ Fail	◻️
hotplug	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
irq	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
kaslr	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
pinctrl	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
qcom_hwrng	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	❌ Fail	◻️
rngtest	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
shmbridge	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
smmu	❌ Fail	✅ Pass	❌ Fail	✅ Pass	✅ Pass	❌ Fail	◻️
watchdog	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
wpss_remoteproc	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️

Device tree changes to support lt9611uxd hdmi-dsi driver. Link: https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/ Signed-off-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com> Signed-off-by: Vishnu Saini <vishnu.saini@oss.qualcomm.com>

qlijarvis · 2026-06-30T17:58:07Z

PR #763 — validate-patch

PR:#763

Verdict	Issues	Detailed Report
⚠️	0	Full report

Final Summary

Lore link present: Yes — Link tag points to lore.kernel.org message-ID
Lore link matches PR commits: Cannot verify — network restricted; lore.kernel.org unreachable during validation
Upstream patch status: Unknown — cannot fetch from lore due to network restrictions
PR present in qcom-next: No — but a related commit 9896f69f0a12 exists with same feature but significantly different implementation

Verdict: ⚠️ — click to expand
🔍 Patch Validation
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Upstream commit:https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/ (network restricted, cannot fetch)
Verdict:⚠️ PARTIAL
Commit Message
Check Status Note
Subject matches upstream ⚠️ Cannot verify - network restricted; lore.kernel.org unreachable
Body preserves rationale ⚠️ Minimal description; cannot compare to upstream
Fixes tag present/correct N/A No Fixes tag (not a bugfix)
Authorship preserved ⚠️ Author email differs from qcom-next version (oss.qualcomm.com vs qti.qualcomm.com)
Backport note (if applicable) ✅ FROMLIST prefix present; Link tag included
Diff
File Status Notes
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:27 ❌ Significant differences from qcom-next commit 9896f69
Issues
Critical: PR patch differs substantially from qcom-next version
The PR patch claims to be FROMLIST (upstream submission) but differs significantly from the already-merged qcom-next commit 9896f69f0a12 by the same author for the same feature:
Regulator design changed:
PR uses separate vreg_lt9611_vcc and vreg_lt9611_vdd regulators
qcom-next uses single lcd_bias regulator with vin-supply
Device node properties differ:
PR: node name lt9611uxd@41, has vcc-supply/vdd-supply, lontium,port-select = <1>, interrupt IRQ_TYPE_EDGE_FALLING
qcom-next: node name lt,lt9611uxd@41, has hdmi-gpios, interrupt IRQ_TYPE_EDGE_RISING, no port-select
Pinctrl configuration differs:
PR: hdmi_reg_en uses PMIC_GPIO_FUNC_NORMAL, lt9611_irq_pin has bias-pull-up
qcom-next: lcd_bias_en uses function = "gpio", lt9611_irq_pin has bias-disable + input-enable
Additional changes in PR not in qcom-next:
PR adds pm8150_l11 regulator configuration
PR enables uart0 (unrelated to HDMI bridge)
Subject line mismatch:
PR: "FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support"
qcom-next: "arm64: dts: qcom: shikra: Add lt9611uxd node to IQS EVK board"
Authorship concern: Author email changed from mdsor@qti.qualcomm.com (qcom-next) to mohit.dsor@oss.qualcomm.com (PR), and added second Signed-off-by from Vishnu Saini.
uart0 enablement: Unrelated change that should be in separate commit.
Verdict
Do not merge as-is. This patch represents a different implementation than what was already merged to qcom-next. The FROMLIST prefix suggests this is from an upstream submission, but the substantial differences from the qcom-next version indicate either:
This is a newer upstream revision that supersedes qcom-next, OR
This is an older version that conflicts with qcom-next, OR
The lore link points to a different patch in a series
Required actions:
Verify which version is correct (upstream vs qcom-next)
If this supersedes qcom-next, the commit message must explain the changes and reference the previous commit
Remove unrelated uart0 enablement to separate commit
Clarify authorship and email address changes
Verify the lore link actually matches this patch (network was restricted during validation)
Final Summary
Lore link present: Yes — Link tag points to lore.kernel.org message-ID
Lore link matches PR commits: Cannot verify — network restricted; lore.kernel.org unreachable during validation
Upstream patch status: Unknown — cannot fetch from lore due to network restrictions
PR present in qcom-next: No — but a related commit 9896f69f0a12 exists with same feature but significantly different implementation

qlijarvis · 2026-06-30T17:58:09Z

PR #763 — checker-log-analyzer

PR:#763
Checker run:https://github.com/qualcomm-linux/kernel-config/actions/runs/28463550718

Checker	Result	Summary
Checker	Result	Summary
checkpatch	⚠️	1 warning: undocumented DT compatible string
dt-binding-check	✅	No binding changes in this PR
dtb-check	❌	Failed to match schema for `lontium,lt9611uxd`
sparse-check	⏭️	Skipped (no C code changes)
check-uapi-headers	⏭️	Skipped (no UAPI changes)
check-patch-compliance	✅	Passed
tag-check	✅	FROMLIST: prefix present
qcom-next-check	✅	FROMLIST: commit allowed

Detailed report: Full report

Checker analysis — click to expand
🤖 CI Checker Analysis (checker-log-analyzer)
PR:#763 - FROMLIST: arm64: dts: qcom: Shikra LT9611UXD support
Source:https://github.com/qualcomm-linux/kernel-config/actions/runs/28463550718
Checker Result Summary
checkpatch ⚠️ 1 warning: undocumented DT compatible string
dt-binding-check ✅ No binding changes in this PR
dtb-check ❌ Failed to match schema for lontium,lt9611uxd
sparse-check ⏭️ Skipped (no C code changes)
check-uapi-headers ⏭️ Skipped (no UAPI changes)
check-patch-compliance ✅ Passed
tag-check ✅ FROMLIST: prefix present
qcom-next-check ✅ FROMLIST: commit allowed
❌ dtb-check
Root cause: The compatible string lontium,lt9611uxd is used in the device tree but has no corresponding YAML schema binding in Documentation/devicetree/bindings/.
Failure details:
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
arch/arm64/boot/dts/qcom/shikra-iqs-evk-imx577-camera.dtb: /soc@0/geniqup@4ac0000/i2c@4a90000/lt9611uxd@41: failed to match any schema with compatible: ['lontium,lt9611uxd']
Fix:
This PR adds device tree support for the LT9611UXD HDMI-DSI bridge but does not include the corresponding device tree binding documentation. To fix this:
Add the YAML binding schema for lontium,lt9611uxd in Documentation/devicetree/bindings/display/bridge/lontium,lt9611uxd.yaml (or similar path)
Ensure the binding is merged upstream first before the DTS changes, or include it in the same patch series
Check the lore link (https://lore.kernel.org/all/20260627-shikra-dt-changes-v1-5-449a402673d0@oss.qualcomm.com/) to verify if the binding was submitted in an earlier patch in the series
Reproduce locally:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/bridge/
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- CHECK_DTBS=y qcom/shikra-iqs-evk.dtb
⚠️ checkpatch
Root cause: The compatible string lontium,lt9611uxd appears in the DTS but checkpatch cannot find its documentation.
Failure details:
WARNING: DT compatible string "lontium,lt9611uxd" appears un-documented -- check ./Documentation/devicetree/bindings/
#71: FILE: arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts:489:
+ compatible = "lontium,lt9611uxd";
Fix:
This is the same root cause as the dtb-check failure. Once the device tree binding YAML schema is added to Documentation/devicetree/bindings/, this warning will be resolved.
Reproduce locally:
./scripts/checkpatch.pl --strict --summary-file --ignore FILE_PATH_CHANGES --git HEAD~1..HEAD
Verdict
2 blockers to fix: This PR cannot be merged until the device tree binding documentation for lontium,lt9611uxd is added. The patch appears to be part 5 of a series (based on the lore link). Verify that patches 1-4 in the upstream series include the binding documentation, and ensure those are merged first or included in this PR.

qcomlnxci · 2026-07-01T07:32:11Z

Test jobs on a867a04

qcomlnxci · 2026-07-01T07:32:16Z

Test Matrix

Test Case	lemans-evk	monaco-evk	qcs615-ride	qcs6490-rb3gen2	qcs8300-ride	qcs9100-ride-r3	x1e80100-crd
BT_FW_KMD_Service	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
BT_ON_OFF	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
BT_SCAN	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
CPUFreq_Validation	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
CPU_affinity	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
DSP_AudioPD	✅ Pass	◻️	⚠️ skip	✅ Pass	✅ Pass	⚠️ skip	◻️
Ethernet	⚠️ skip	◻️	⚠️ skip	⚠️ skip	⚠️ skip	⚠️ skip	◻️
Freq_Scaling	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
GIC	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
IPA	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
Interrupts	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
OpenCV	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
PCIe	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
Probe_Failure_Check	❌ Fail	◻️	✅ Pass	❌ Fail	❌ Fail	❌ Fail	◻️
RMNET	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
UFS_Validation	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
USBHost	❌ Fail	◻️	❌ Fail	❌ Fail	❌ Fail	❌ Fail	◻️
WiFi_Firmware_Driver	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	✅ Pass	◻️
WiFi_OnOff	✅ Pass	◻️	⚠️ skip	✅ Pass	✅ Pass	✅ Pass	◻️
adsp_remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	❌ Fail	◻️
cdsp_remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	❌ Fail	◻️
gpdsp_remoteproc	✅ Pass	◻️	⚠️ skip	⚠️ skip	✅ Pass	❌ Fail	◻️
hotplug	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
irq	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
kaslr	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
pinctrl	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
qcom_hwrng	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
remoteproc	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	❌ Fail	◻️
rngtest	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
shmbridge	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
smmu	❌ Fail	◻️	❌ Fail	✅ Pass	✅ Pass	❌ Fail	◻️
watchdog	✅ Pass	◻️	✅ Pass	✅ Pass	✅ Pass	✅ Pass	◻️
wpss_remoteproc	✅ Pass	◻️	⚠️ skip	✅ Pass	✅ Pass	✅ Pass	◻️

Salendarsingh Gaud (sgaud-quic) · 2026-07-10T17:25:28Z

mohitdsor please rebase this on tip

Salendarsingh Gaud (sgaud-quic) · 2026-07-20T09:23:00Z

Dependency PR is reverted.

qcomlnxci · 2026-08-20T01:59:08Z

@qualcomm-linux/kernel This pull request has been marked as stale due to 30 days of inactivity and will automatically close after an additional 5 days.

mohitdsor changed the base branch from main to qcom-6.18.yJune 23, 2026 16:10

mohitdsor requested review from a team, Kaushal Kumar (quic-kaushalk), Shivendra Pratap (quicAspratap) and Rajendra (rrnayak)June 23, 2026 16:10

mohitdsor force-pushed the fix/my-second-change branch from 890eadc to ba35046Compare June 23, 2026 21:01

Salendarsingh Gaud (sgaud-quic) requested changes Jun 26, 2026
View reviewed changes

mohitdsor force-pushed the fix/my-second-change branch from ba35046 to d088a35Compare June 27, 2026 18:45

qcomlnxci requested a review from a teamJune 27, 2026 18:47

mohitdsor force-pushed the fix/my-second-change branch from d088a35 to bf4bf52Compare June 27, 2026 21:55

Komal Bajaj (Komal-Bajaj) reviewed Jun 29, 2026
View reviewed changes

Comment threadarch/arm64/boot/dts/qcom/shikra-iqs-evk.dts Outdated
output-high;
};
};

Komal Bajaj (Komal-Bajaj)Jun 29, 2026
Copy link
Copy Markdown
Contributor
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
remove extra lines

mohitdsor force-pushed the fix/my-second-change branch from bf4bf52 to 09c6dfbCompare June 29, 2026 13:42

qcomlnxci requested a review from a teamJune 29, 2026 13:44

mohitdsor force-pushed the fix/my-second-change branch from 09c6dfb to 2ea7265Compare June 29, 2026 14:35

mohitdsor force-pushed the fix/my-second-change branch from 2ea7265 to 77e937dCompare June 29, 2026 15:31

Komal Bajaj (Komal-Bajaj) previously approved these changes Jun 30, 2026
View reviewed changes

mohitdsor dismissed Komal Bajaj (Komal-Bajaj)’s stale review via a867a04June 30, 2026 17:28

mohitdsor force-pushed the fix/my-second-change branch from 77e937d to a867a04Compare June 30, 2026 17:28

qcomlnxci requested a review from a teamJune 30, 2026 17:30

Komal Bajaj (Komal-Bajaj) approved these changes Jul 1, 2026
View reviewed changes

qcomlnxci added the stale No recent activity label Aug 20, 2026

qcomlnxci closed this Aug 25, 2026

Uh oh!

Conversation

mohitdsor commented Jun 23, 2026• edited by Komal-Bajaj Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

qswat-orbit-externalBot commented Jun 23, 2026

Uh oh!

qswat-orbit-externalBot commented Jun 23, 2026

Uh oh!

qswat-orbit-externalBot commented Jun 23, 2026

Uh oh!

Salendarsingh Gaud (sgaud-quic) left a comment

Choose a reason for hiding this comment

Uh oh!

qlijarvis commented Jun 27, 2026

PR #763 — validate-patch

Final Summary

🔍 Patch Validation

Commit Message

Diff

Issues

Verdict

Final Summary

Uh oh!

qlijarvis commented Jun 27, 2026

PR #763 — checker-log-analyzer

🤖 CI Checker Analysis (checker-log-analyzer)

❌ checkpatch

❌ dtb-check

❌ check-patch-compliance

Verdict

Uh oh!

qlijarvis commented Jun 27, 2026

PR #763 — validate-patch

Final Summary

🔍 Patch Validation

Commit Message

Diff

Issues

Verdict

Final Summary

Uh oh!

qlijarvis commented Jun 27, 2026

PR #763 — checker-log-analyzer

🤖 CI Checker Analysis (checker-log-analyzer)

❌ checkpatch

❌ dtb-check

❌ check-patch-compliance

Verdict

Uh oh!

Komal Bajaj (Komal-Bajaj)Jun 29, 2026

Choose a reason for hiding this comment

Uh oh!

Salendarsingh Gaud (sgaud-quic) commented Jun 29, 2026

Uh oh!

qlijarvis commented Jun 29, 2026

PR #763 — validate-patch

Final Summary

🔍 Patch Validation

Commit Message

Diff

Issues

Verdict

Final Summary

Uh oh!

qlijarvis commented Jun 29, 2026

PR #763 — checker-log-analyzer

🤖 CI Checker Analysis (checker-log-analyzer)

❌ checkpatch

❌ dtb-check

❌ check-patch-compliance

Verdict

Uh oh!

qlijarvis commented Jun 29, 2026

PR #763 — validate-patch

Final Summary

🔍 Patch Validation

Commit Message

Diff

Issues

mohitdsor commented Jun 23, 2026•
edited by Komal-Bajaj
Loading