BranchesTags

Repository files navigation

mpv

Build Status

Overview

mpv is a movie player based on MPlayer and mplayer2. It supports a wide variety of video file formats, audio and video codecs, and subtitle types.

If you are wondering what's different from mplayer2 and MPlayer you can read more about the changes.

Compilation

Compiling with full features requires development files for several external libraries. Below is a list of some important requirements.

The mpv build system uses waf but we don't store it in your source tree. The script './bootstrap.py' will download the latest version of waf that was tested with the build system.

For a list of the available build options use ./waf configure --help. If you think you have support for some feature installed but configure fails to detect it, the file build/config.log may contain information about the reasons for the failure.

NOTE: To avoid cluttering the output with unreadable spam, --help only shows one of the two switches for each option. If the option is autodetected by default, the --disable-*** switch is printed; if the option is disabled by default, the --enable-*** switch is printed. Either way, you can use --enable-*** or --disable-** regardless of what is printed by --help.

To build the software you can use ./waf build: the result of the compilation will be located in build/mpv. You can use ./waf install to install mpv to the prefix after it is compiled.

NOTE: Using the old build system (with ./old-configure) should still work, but will be removed in a future version of mpv.

Essential dependencies (incomplete list):

  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be explicitly enabled when compiling ffmpeg)

Most of the above libraries are available in suitable versions on normal Linux distributions. However FFmpeg is an exception (distro versions may be too old to work at all or work well). For that reason you may want to use the separately available build wrapper (mpv-build) that first compiles FFmpeg libraries and libass, and then compiles the player statically linked against those.

If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up to date formula that compiles mpv with sensible dependencies and defaults for OSX.

FFmpeg vs. Libav

Generally, mpv should work with the latest release as well as the git version of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work with FFmpeg only. See the wiki article about the issue.

Bug reports

Please use the issue tracker provided by GitHub to send us bug reports or feature requests.

Contributing

For small changes you can just send us pull requests through GitHub. For bigger changes come and talk to us on IRC before you start working on them. It will make code review easier for both parties later on.

Contacts

These forms of contact are meant to ask questions about mpv usage, give feedback on mpv and discuss it's development.

If possible, please avoid posting bugs here and use the issue tracker instead.

To contact the mpv team in private write to mpv-team@googlegroups.com.

About

Video player based on MPlayer/mplayer2

mpv.io

Resources

Readme
GPL-2.0 license
Activity

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
mpv
Build Status
Overview
mpv is a movie player based on MPlayer and mplayer2. It supports a wide
variety of video file formats, audio and video codecs, and subtitle types.
If you are wondering what's different from mplayer2 and MPlayer you can read
more about the changes.
Compilation
Compiling with full features requires development files for several
external libraries. Below is a list of some important requirements.
The mpv build system uses waf but we don't store it in your source tree. The
script './bootstrap.py' will download the latest version of waf that was tested
with the build system.
For a list of the available build options use ./waf configure --help. If
you think you have support for some feature installed but configure fails to
detect it, the file build/config.log may contain information about the
reasons for the failure.
NOTE: To avoid cluttering the output with unreadable spam, --help only shows
one of the two switches for each option. If the option is autodetected by
default, the --disable-*** switch is printed; if the option is disabled by
default, the --enable-*** switch is printed. Either way, you can use
--enable-*** or --disable-** regardless of what is printed by --help.
To build the software you can use ./waf build: the result of the compilation
will be located in build/mpv. You can use ./waf install to install mpv
to the prefix after it is compiled.
NOTE: Using the old build system (with ./old-configure) should still work,
but will be removed in a future version of mpv.
Essential dependencies (incomplete list):
  • gcc or clang
  • X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
  • Audio output development headers (libasound, pulseaudio)
  • fribidi, freetype, fontconfig development headers (for libass)
  • libass
  • FFmpeg libraries (libavutil libavcodec libavformat libswscale libpostproc)
  • libjpeg
  • libquvi if you want to play Youtube videos directly
  • libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be
explicitly enabled when compiling ffmpeg)
Most of the above libraries are available in suitable versions on normal
Linux distributions. However FFmpeg is an exception (distro versions may be
too old to work at all or work well). For that reason you may want to use
the separately available build wrapper (mpv-build) that first compiles FFmpeg
libraries and libass, and then compiles the player statically linked against
those.
If you are running Mac OSX and using homebrew we provide homebrew-mpv, an up
to date formula that compiles mpv with sensible dependencies and defaults for
OSX.
FFmpeg vs. Libav
Generally, mpv should work with the latest release as well as the git version
of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work
with FFmpeg only. See the wiki article about the issue.
Bug reports
Please use the issue tracker provided by GitHub to send us bug
reports or feature requests.
Contributing
For small changes you can just send us pull requests through GitHub. For bigger
changes come and talk to us on IRC before you start working on them. It will
make code review easier for both parties later on.
Contacts
These forms of contact are meant to ask questions about mpv usage, give
feedback on mpv and discuss it's development.
If possible, please avoid posting bugs here and use the issue tracker
instead.
To contact the mpv team in private write to mpv-team@googlegroups.com.
About
Video player based on MPlayer/mplayer2
mpv.io
Resources
Readme
GPL-2.0 license
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors