BranchesTags

Repository files navigation

Owl - RC Lee Hall Booking System

To open issues for project enhancement

Open issues according to the project enhancement template.

To make git commits according to an issue being worked

Make sure that you are on a feature branch. If not, do

git checkout -b branch-name

Commit message should follow this format.

git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'

For example: git commit -m 'create user login component' -m '#3'

Push to this repository.

For first commit on branch: git push -u origin branch-name

For subsequent commits on branch: git push

To merge into master branch

  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.

Important Notes

  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.

React Frontend Development Setup

Running a local development environment

Clone this repository, and install node packages using npm.

npm install

Start the development server.

npm run start

Go to phoenix and follow the instructions there to setup a graphql-prisma-express server.

An authentication key of the form xxx.xxx.xxx (much much longer) for a test user that you should create using localhost:4466/prisma/_admin can be obtained by sending a login mutation request in the playground at localhost:4000/graphql.

Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.

Test driving the application

Using Docker and without cloning our Github repository

Pull our public repository at Docker hub.

docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev

  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000

Now, you may navigate to localhost:3000.

Stop the container by either

  • CTRL + C if you run without -d
  • docker stop owl if you run with -d

Remove the image if necessary.

docker rmi rctechclub/owl:dev

Note that this does not enable hot reloading

Docker Build and Push

To build an image.

npm run docker:build

To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.

npm run docker:push

About

Hall facility booking system: https://owl.rctech.club

Topics

booking-system

Resources

Readme
Activity
Custom properties

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
Owl - RC Lee Hall Booking System
To open issues for project enhancement
Open issues according to the project enhancement template.
To make git commits according to an issue being worked
Make sure that you are on a feature branch. If not, do
git checkout -b branch-name
Commit message should follow this format.
git commit -m '[verb in present tense] [item being worked]' -m '#[issue number]'
For example: git commit -m 'create user login component' -m '#3'
Push to this repository.
For first commit on branch: git push -u origin branch-name
For subsequent commits on branch: git push
To merge into master branch
  1. Create a pull request to merge feature branch into master.
  2. Request for at least 1 review.
  3. Squash and merge into master after the pull request has been approved.
  • If this fails, that means your branch is not up to date with master. Run git rebase -i master; more info can be found here. After rebasing, forcefully push to remote using git push -f.
Important Notes
  1. Make sure to git pull before working on anything at the start of the day.
  2. The master branch is protected from direct pushes. You have to make feature branches by following the instructions above.
React Frontend Development Setup
Running a local development environment
Clone this repository, and install node packages using npm.
npm install
Start the development server.
npm run start
Go to phoenix and follow the
instructions there to setup a graphql-prisma-express server.
An authentication key of the form xxx.xxx.xxx (much much longer) for
a test user that you should create using localhost:4466/prisma/_admin can
be obtained by sending a login mutation request in the playground at
localhost:4000/graphql.
Copy and paste the authentication key into localhost:3000id =authentication_key where authentication_key is your key.
Test driving the application
Using Docker and without cloning our Github repository
Pull our public repository at Docker hub.
docker run --name owl --rm -p 3000:3000 rctechclub/owl:dev
  • -d enables terminal detached mode (optional)
  • --name sets a short name for the docker container
  • --rm removes the docker container if a stop command is executed
  • -p 3000:3000 plugs the container's port from 3000 to 3000
Now, you may navigate to localhost:3000.
Stop the container by either
  • CTRL + C if you run without -d
  • docker stop owl if you run with -d
Remove the image if necessary.
docker rmi rctechclub/owl:dev
Note that this does not enable hot reloading
Docker Build and Push
To build an image.
npm run docker:build
To push to public repository – only for those who are part of the rctechclub organisation on Docker hub.
npm run docker:push
About
Hall facility booking system: https://owl.rctech.club
Topics
booking-system
Resources
Readme
Activity
Custom properties
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Used by
Contributors
Languages