Skip to content
BranchesTags

Repository files navigation

OnStep Telescope Controller

Important Note

THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:

  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.

What is OnStep?

OnStep is a computerized telescope goto controller, based on Teensy or Arduino control of stepper motors.

It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts (including Dobsonians, and the like.)

OnStep was designed, from the beginning, as a more or less general purpose system and provisions were made in the firmware to allow for use on a variety of mounts.

Features

OnStep supports a wide variety of connection options. Either two or three serial "command channels" can be utilized. One of the these is normally devoted to a USB connection and for the other(s) choose from the following:

  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.

Other software in the OnStep ecosystem include:

  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets (version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).

OnStep is compatible with the LX200 protocol. This means it can be controlled from other planetarium software, like: Sky Safari, CdC (even without ASCOM), Stellarium, etc.

There are also INDI drivers so it can be used from Linux, with CdC or KStars.

Documentation

Detailed documentation, including the full set of features, detailed designs for PCBs, instructions on how to build a controller, how to configure the firmware for your particular mount, can all be found the OnStep Group Wiki.

Change Log

All the changes are tracking in git, and a detailed list can be accessed using the following git command:

git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"

Support

Questions and discussion should be on the mailing list (also accessible via the web) at the OnStep Group.

License

OnStep is open source free software, licensed under the GPL.

See LICENSE.txt file.

Author

Howard Dutton

About

Arduino telescope goto for equatorial and alt/az mounts

www.stellarjourney.com/index.php?r=site/equipment_onstep

Topics

onstepresponsive-designresponsive-layouttelescope

Resources

Readme
GPL-3.0 license
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
GitHub - rlw1138/OnStep: Arduino telescope goto for equatorial and alt/az mounts · GitHub
Skip to content
BranchesTags
Repository files navigation
OnStep Telescope Controller
Important Note
THERE ARE SEVERAL GITHUB BRANCHES OF ONSTEP:
  • The RELEASE BRANCHES are well tested and what most should use. Usually the newest (highest revision) RELEASE is recommended. No new features are added and only bug fixes where necessary and safe.
  • Tne BETA BRANCH, if present, is a "snap-shot" of the MASTER where we have reached a point of apparent stability. This provides access to most new features for adventurous users.
  • The MASTER BRANCH is the most up to date OnStep version; where new features are added. It is the least well tested branch and should only be user by experienced users willing to test for and report bugs.
What is OnStep?
OnStep is a computerized telescope goto controller, based on Teensy or
Arduino control of stepper motors.
It supports Equatorial Mounts (GEM, Fork, etc.) as well as Alt-Az mounts
(including Dobsonians, and the like.)
OnStep was designed, from the beginning, as a more or less general purpose
system and provisions were made in the firmware to allow for use on a variety
of mounts.
Features
OnStep supports a wide variety of connection options. Either two or three serial
"command channels" can be utilized. One of the these is normally devoted to a USB
connection and for the other(s) choose from the following:
  • Bluetooth
  • ESP8266 WiFi
  • Arduino M0/Ethernet Shield
  • Even another USB port or RS232 serial isn't very difficult to add.
Other software in the OnStep ecosystem include:
  • an ASCOM driver (with IP and Serial support),
  • an Android App useable over WiFi or Bluetooth equipped Phones/Tablets
(version 2.3.3 or later),
  • a "built-in" website (on the Ethernet and/or WiFi device),
  • a full planetarium program that controls all features (Sky Planetarium).
OnStep is compatible with the LX200 protocol. This means it can be controlled
from other planetarium software, like: Sky Safari, CdC (even without ASCOM),
Stellarium, etc.
There are also INDI drivers so it can be used from Linux, with CdC or KStars.
Documentation
Detailed documentation, including the full set of features, detailed designs for
PCBs, instructions on how to build a controller, how to configure the firmware
for your particular mount, can all be found the OnStep Group Wiki.
Change Log
All the changes are tracking in git, and a detailed list can be accessed using the
following git command:
git log --date=short --pretty=format:"%h %ad %<(20)%an %<(150,trunc)%s"
Support
Questions and discussion should be on the mailing list (also accessible via the
web) at the OnStep Group.
License
OnStep is open source free software, licensed under the GPL.
See LICENSE.txt file.
Author
Howard Dutton
About
Arduino telescope goto for equatorial and alt/az mounts
www.stellarjourney.com/index.php?r=site/equipment_onstep
Topics
onstepresponsive-designresponsive-layouttelescope
Resources
Readme
GPL-3.0 license
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages