This repository was archived by the owner on Sep 13, 2022. It is now read-only.
BranchesTags

Repository files navigation

rbn

This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.

Interfaces

Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:

To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.

Transports

Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.

The process for adding a transport is the same as that for an interface.

Easy Mode

  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js

Configuration

To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:

{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:

  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)

Streaming logs and debugging

Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:

sudo DEBUG=base,websocket,ble node rbn-pi.js

If you're looking to stream logs out to a service, you should write a transport to do so!

Contributing

The Robin OS is designed to make it easy to add custom modules.

(finish this)

Creating an interface

Your module should export a single class. Your constructor will be called.

About

A base station for everyone

Resources

Readme
Apache-2.0 license
Activity
Custom properties

Stars

8 stars

Watchers

3 watching

Forks

4 forks
Report repository

Releases

Packages

Used by

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content

This repository was archived by the owner on Sep 13, 2022. It is now read-only.

BranchesTags
Repository files navigation
rbn
This is a bit of software that was built for the raspberry pi, but should work on any linux box. It's good at doing things like passing data from bluetooth low energy devices over a websocket connection, or sending data from a connected arduino up to firebase. It consists of two parts - interfaces and transports.
Interfaces
Interfaces allow the pi to collect data from other devices. Currently, the following interfaces are supported:
To add an interface, just add the interface's name in the dependancies section of your package.json file and run rbn-base.js. Make sure to use latest for the version if you want the package to auto-update. If your interface has options you can configure, you can set them in config.json.
Transports
Got some data from an interface? Awesome. Transports let you send that data somewhere on the internet.
The process for adding a transport is the same as that for an interface.
Easy Mode
  1. Install raspbian on your Pi.
  2. SSH onto your pi.
  3. Run curl -h http://...
  4. Run sudo node rbn-pi.js
Configuration
To add or remove interfaces and transports, and configure the behavior of the grid, change the options in config.json. By default, config.json looks like this:
{
"autoUpdate": false,
"runOnBoot": true,
"transports": {
"rbn-websocket": {
"endpoint": "http://robin-grid.omrdev.com"
}
},
"interfaces": {
"rbn-rfid": {}
}
}

Besides the interfaces and transports objects, the supported options are:
  • autoUpdate - update all modules automagically when a new version is released (default: true)
  • runOnBoot - run the grid automatically when the OS boots up using forever (default: true)
Streaming logs and debugging
Every module emits logs on a debug namespace equal to the name of the module. There is also a base namespace with the most general logs. To listen on a namespace, run pass a DEBUG argument to node, like so:
sudo DEBUG=base,websocket,ble node rbn-pi.js
If you're looking to stream logs out to a service, you should write a transport to do so!
Contributing
The Robin OS is designed to make it easy to add custom modules.
(finish this)
Creating an interface
Your module should export a single class. Your constructor will be called.
About
A base station for everyone
Resources
Readme
Apache-2.0 license
Activity
Custom properties
Stars
8 stars
Watchers
3 watching
Forks
4 forks
Report repository
Releases
Packages
Used by
Contributors
Languages