A TACACS+ client that supports authentication, authorization and accounting.
Unlike RADIUS, which was designed for similar purposes, the TACACS+ protocol offers basic packet encryption but, as with most crypto designed back then, it's not secure and definitely should not be used over untrusted networks.
This package has been successfully used with the free tac_plus TACACS+ server on a variety of operating systems.
$ pip install tacacs_plus
$ tacacs_client -u myuser -H localhost authenticate
$ tacacs_client -u myuser -H localhost authenticate -t pap
$ tacacs_client -u myuser -H localhost -v authenticate -t chap
status: PASS
$ tacacs_client -u myuser -H localhost authorize -c service=shell cmd=show cmdarg=version
$ tacacs_client -u myuser -H localhost -v authorize -t pap -c service=shell cmd=show cmdarg=version
status: PASS
$ tacacs_client -u myuser -H localhost -v authorize -t pap -c service=junos-exec
status: REPL
av-pairs:
allow-commands=^acommandregex$
deny-commands=^anothercommandregex$
$ tacacs_client -u myuser -H localhost account -f start -c service=shell cmd=show cmdarg=version
$ tacacs_client -u myuser -H localhost account -f stop -c service=shell cmd=show cmdarg=version
$ tacacs_client -h
usage: tacacs_client [-h] -u USERNAME -H HOST [-p PORT] [-l PRIV_LVL]
[-t {ascii,pap,chap}] [-r REM_ADDR] [-P VIRTUAL_PORT]
[--timeout TIMEOUT] [-d] [-v] [-k KEY]
{authenticate,authorize,account} ...
Tacacs+ client with full AAA support:
* Authentication supports both ascii, pap and chap.
* Authorization supports AV pairs and single commands.
* Accounting support AV pairs and single commands.
NOTE: shared encryption key can be set via environment variable TACACS_PLUS_KEY or via argument.
NOTE: user password can be setup via environment variable TACACS_PLUS_PWD or via argument.
positional arguments:
{authenticate,authorize,account}
action to perform over the tacacs+ server
authenticate authenticate against a tacacs+ server
authorize authorize a command against a tacacs+ server
account account commands with accounting flags against a tacacs+ server
optional arguments:
-h, --help show this help message and exit
-u USERNAME, --username USERNAME
user name
-H HOST, --host HOST tacacs+ server address
-p PORT, --port PORT tacacs+ server port (default 49)
-l PRIV_LVL, --priv-lvl PRIV_LVL
user privilege level
-t {ascii,pap,chap}, --authen-type {ascii,pap,chap}
authentication type
-r REM_ADDR, --rem-addr REM_ADDR
remote address (logged by tacacs server)
-P VIRTUAL_PORT, --virtual-port VIRTUAL_PORT
console port used in connection (logged by tacacs server)
--timeout TIMEOUT
-d, --debug enable debugging output
-v, --verbose print responses
-6, --v6 use IPv6 addresses
-k KEY, --key KEY tacacs+ shared encryption key
$ tacacs_client authenticate -h
usage: tacacs_client authenticate [-h] [-p PASSWORD]
optional arguments:
-h, --help show this help message and exit
-p PASSWORD, --password PASSWORD
user password
$ tacacs_client authorize -h
usage: tacacs_client authorize [-h] -c CMDS [CMDS ...]
optional arguments:
-h, --help show this help message and exit
-c CMDS [CMDS ...], --cmds CMDS [CMDS ...]
list of cmds to authorize
$ tacacs_client account -h
usage: tacacs_client account [-h] -c CMDS [CMDS ...] -f {start,stop,update}
optional arguments:
-h, --help show this help message and exit
-c CMDS [CMDS ...], --cmds CMDS [CMDS ...]
list of cmds to authorize
-f {start,stop,update}, --flag {start,stop,update}
accounting flag
#!/usr/bin/env pythonfrom __future__ importprint_functionfromtacacs_plus.clientimportTACACSClientfromtacacs_plus.flagsimportTAC_PLUS_ACCT_FLAG_START, TAC_PLUS_ACCT_FLAG_WATCHDOG, TAC_PLUS_ACCT_FLAG_STOPimportsocket# For IPv6, use `family=socket.AF_INET6`cli=TACACSClient('host', 49, 'secret', timeout=10, family=socket.AF_INET)
# authenticate user and passauthen=cli.authenticate('username', 'password')
print("PASS!"ifauthen.validelse"FAIL!")
# authorize user and commandauthor=cli.authorize('username', arguments=[b"service=shell", b"cmd=show", b"cmdargs=version"])
print("PASS!"ifauthor.validelse"FAIL!")
# start accounting session for commandacct=cli.account('username', TAC_PLUS_ACCT_FLAG_START, arguments=[b"service=shell", b"cmd=show", b"cmdargs=version"])
print("PASS!"ifacct.validelse"FAIL!")
# continue accounting session for another commandacct=cli.account('username', TAC_PLUS_ACCT_FLAG_WATCHDOG, arguments=[b"service=shell", b"cmd=debug", b"cmdargs=aaa"])
print("PASS!"ifacct.validelse"FAIL!")
# close accounting sessionacct=cli.account('username', TAC_PLUS_ACCT_FLAG_STOP, arguments=[b"service=shell", b"cmd=exit"])
print("PASS!"ifacct.validelse"FAIL!")