BranchesTags

Latest commit

History

8 Commits

Folders and files

NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md

Repository files navigation

UMS-Windows-Scripts

This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.

The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.

A few posts mentioning script_dir

http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62

http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846

Download and extract 'UMS Scripts' folder on your harddrive.

If you want this to work out of the box from the example below then download:

https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip

and put the folder called "UMS Scripts" on your C: Drive

Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )

\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'

\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV

\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.

Edit your configuration file

Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)

show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting

Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file. To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'

Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly. It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.

# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?

If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server and/or do NOT use default profile directory: C:\ProgramData\UMS Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.

Disable autoplay on your device!

Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.

Ready to go

Start UMS and navigate to Server Settings > Scripts on your TV/device.

Example Scripts

These are the current example scripts included

  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat

*Your configuration file is either the UMS.conf , or a specific renderer .conf, depending on whether you want a "global" effect or just a per renderer effect.

About

Windows script setup for Universal Media Server

Resources

Readme
Activity

Stars

1 star

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Latest commit
History
8 Commits
Folders and files
NameName
Last commit message
Last commit date
UMS Scripts
UMS Scripts
README.md
README.md
Repository files navigation
UMS-Windows-Scripts
This is a small setup and guide on how to run BAT files with Universal Media Server via your DLNA Device.
The functionality has not been fully implemented, but with some adjustments (included in this download ) it actually works pretty decent.
A few posts mentioning script_dir
http://universalmediaserver.com/forum/memberlist.php?mode=viewprofile&u=62
http://www.universalmediaserver.com/forum/viewtopic.php?f=9&t=12846
Download and extract 'UMS Scripts' folder on your harddrive.
If you want this to work out of the box from the example below then download:
https://github.com/squadjot/UMS-Windows-Scripts/archive/master.zip
and put the folder called "UMS Scripts" on your C: Drive
Alternatively you can put the UMS Scripts folder where ever you want. Just remember that from UMS.conf you must target the folder called Scripts Menu that is located inside the UMS Scripts folder. ( See example below )
\UMS Scripts : This is the base folder. It comes with two additional folders inside. 'Scripts Menu' and 'helpers'
\UMS Scripts\Scripts Menu : This folder contains the bat files that will be shown on your TV
\UMS Scripts\helpers : This is the "engineroom" of your scripts. This is where you can put supplementing scripts, write temp files, save backups etc.
Edit your configuration file
Make sure you have the following variables set in your configuration file (UMS.conf, or specific renderer.conf)
show_server_settings_folder = true
script_dir=c:\\UMS Scripts\\Scripts Menu

Bugs, Fixes & Troubleshooting
Important: The script_dir functionality of UMS is buggy and will result in multiple calls to the the bat file.
To avoid this i made a batfile called @run-once.bat which is called through @ums-script.bat from every bat file in 'Scripts Menu'
Furthermore i have found that the following settings can break UMS's ability to "play" the Scripts correctly.
It may not matter for you, it all depends on the device. Anyways if you experience problems you can try comment out or change these.
# These settings can break UMS's script functionality KeepAspectRatio = true

Are you using non-default paths?
If you did NOT install UMS in: C:\Program Files (x86)\Universal Media Server
and/or do NOT use default profile directory: C:\ProgramData\UMS
Then edit UMS Scripts\helpers\@ums-script.bat to adjust paths.
Disable autoplay on your device!
Unless you want to run all succeeding scripts, then you have to disable any autoplay(-next) -feature on your device. This functionality is not something UMS has any control over.
Ready to go
Start UMS and navigate to Server Settings > Scripts on your TV/device.
Example Scripts
These are the current example scripts included
  • Restart UMS.bat ( Quit/Restart UMS entirely )
  • Save Copy of Log.bat ( Copy the logs to \helpers\backups\#timestamp# )
  • Backup UMS configs.bat ( Copy the configs to \helpers\backups\#timestamp# )
  • Reboot Computer.bat
  • Shutdown Computer.bat
*Your configuration file is either the UMS.conf , or a specific renderer .conf,
depending on whether you want a "global" effect or just a per renderer effect.
About
Windows script setup for Universal Media Server
Resources
Readme
Activity
Stars
1 star
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages