BranchesTags

Repository files navigation

scssphp

https://scssphp.github.io/scssphp

BuildLicense

scssphp is a compiler for SCSS written in PHP.

Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.

Running Tests

scssphp uses PHPUnit for testing.

Run the following command from the root directory to run every test:

vendor/bin/phpunit tests

There are several tests in the tests/ directory:

  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.

When changing any of the tests in tests/inputs, the tests will most likely fail because the output has changed. Once you verify that the output is correct you can run the following command to rebuild all the tests:

BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also updates the list of excluded specs from sass-spec.

To enable the full sass-spec compatibility tests:

TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard

scssphp source conforms to PSR12.

Run the following command from the root directory to check the code for "sniffs".

vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis

scssphp uses phpstan for static analysis.

Run the following command from the root directory to analyse the codebase:

make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked fully, the setup contains a baseline file with all errors we want to ignore. In particular, we ignore all errors related to not specifying the types inside arrays when these arrays correspond to the representation of Sass values and Sass AST nodes in the parser and compiler. When contributing, the proper process to deal with static analysis is the following:

  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline

Additions to the baseline will be reviewed to avoid ignoring errors that should have been fixed.

About

SCSS compiler written in PHP

scssphp.github.io/scssphp/

Resources

Readme
License
Activity

Stars

0 stars

Watchers

0 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
scssphp
https://scssphp.github.io/scssphp
BuildLicense
scssphp is a compiler for SCSS written in PHP.
Checkout the homepage, https://scssphp.github.io/scssphp, for directions on how to use.
Running Tests
scssphp uses PHPUnit for testing.
Run the following command from the root directory to run every test:
vendor/bin/phpunit tests

There are several tests in the tests/ directory:
  • ApiTest.php contains various unit tests that test the PHP interface.
  • ExceptionTest.php contains unit tests that test for exceptions thrown by the parser and compiler.
  • FailingTest.php contains tests reported in Github issues that demonstrate compatibility bugs.
  • InputTest.php compiles every .scss file in the tests/inputs directory
then compares to the respective .css file in the tests/outputs directory.
  • SassSpecTest.php extracts tests from the sass/sass-spec repository.
When changing any of the tests in tests/inputs, the tests will most likely
fail because the output has changed. Once you verify that the output is correct
you can run the following command to rebuild all the tests:
BUILD=1 vendor/bin/phpunit tests

This will compile all the tests, and save results into tests/outputs. It also
updates the list of excluded specs from sass-spec.
To enable the full sass-spec compatibility tests:
TEST_SASS_SPEC=1 vendor/bin/phpunit tests

Coding Standard
scssphp source conforms to PSR12.
Run the following command from the root directory to check the code for "sniffs".
vendor/bin/phpcs --standard=PSR12 --extensions=php bin src tests *.php

Static Analysis
scssphp uses phpstan for static analysis.
Run the following command from the root directory to analyse the codebase:
make phpstan

As most of the codebase is composed of legacy code which cannot be type-checked
fully, the setup contains a baseline file with all errors we want to ignore. In
particular, we ignore all errors related to not specifying the types inside arrays
when these arrays correspond to the representation of Sass values and Sass AST nodes
in the parser and compiler.
When contributing, the proper process to deal with static analysis is the following:
  1. Make your change in the codebase
  2. Run make phpstan
  3. Fix errors reported by phpstan when possible
  4. Repeat step 2 and 3 until nothing gets fixed anymore at step 3
  5. Run make phpstan-baseline to regenerate the phpstan baseline
Additions to the baseline will be reviewed to avoid ignoring errors that should have
been fixed.
About
SCSS compiler written in PHP
scssphp.github.io/scssphp/
Resources
Readme
License
Activity
Stars
0 stars
Watchers
0 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages