Skip to content

Home

Jump to bottom
Boris Rybalkin edited this page Jun 7, 2026 · 102 revisions

Building Syncloud device is easy. You will need: Arm, Arm64 or x64 device, power adapter, ethernet cable, disk or SD card. You will also need a computer to create a boot disk or SD card. Just follow the instruction below.

More information can be found on the wiki pages on the right.

Download Image

Here's the list of supported boards and links to image files:

DeviceImage
Banana Pi M1Download
Banana Pi M1+Download
Banana Pi M2Download
Banana Pi M3Download
CubieboardDownload
Cubieboard 2Download
CubietruckDownload
BeagleBone BlackDownload
Raspberry Pi 2/3/4 32 bit (B/B+)Download
Raspberry Pi 3/4/5 64 bit (B/B+)Download
Odroid C2Download
Odroid XU3Download
Odroid HC1SD, SATA, info
Odroid HC2SD, SATA, info
Odroid HC4Download
Odroid HC4 (legacy, non-LCD)Download, info
Odroid XU4Download
Odroid N2Download
Odroid U3Download
TinkerDownload
Helios4Download
Helios64Download
Rock64Download
Jetson NanoDownload
BigTreeTech CB1Download
x64 Virtual BoxDownload, info
x64 Linux Dockerinfo
x64 Syncloud OSDownload, info

Prepare device

  1. Write image to a disk and/or SD card with Etcher image writer

    Be careful and detach other external drives before writing so you do not erase everything from it accidentally.

  2. Power off device, insert disk and/or SD card into device and power it on.

  3. Follow this instruction to activate it.

  4. Do not forget to extend boot disk from Settings - Internal Memory

  5. For device and apps to be available from the Internet enable external access in Settings - Access.

We will help you with any questions at https://syncloud.discourse.group

Clone this wiki locally