Up2/PCM512x w/ gpiochip to control LEDs and clocks

Documentation/devicetree/bindings/sound/hifiberry-dacpro.yaml

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/hifiberry-dacpro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hifiberry DAC+ Pro clock driver
+
+maintainers:
+ - Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+
+description: |
+ The Hifiberry DAC+ PRO provides two oscillators for enhanced audio
+ quality. The clk driver allow for select and configuration of the
+ clock source.
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ items:
+ - const: hifiberry,dacpro-clk
+ reg:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+
+examples:
+ - |
+ dacpro_osc: dacpro_osc {
+ compatible = "hifiberry,dacpro-clk";
+ #clock-cells = <0>;
+ };
+
+...

MAINTAINERS

@@ -7242,6 +7242,12 @@ S:	Maintained
 F:	drivers/gpio/gpio-mockup.c
 F:	tools/testing/selftests/gpio/
 
+GPIO REGMAP
+R:	Michael Walle <michael@walle.cc>
+S:	Maintained
+F:	drivers/gpio/gpio-regmap.c
+F:	include/linux/gpio/regmap.h
+
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
 M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>

drivers/clk/Kconfig

@@ -70,6 +70,10 @@ config COMMON_CLK_HI655X
  multi-function device has one fixed-rate oscillator, clocked
  at 32KHz.
 
+config COMMON_CLK_HIFIBERRY_DACPRO
+	tristate
+	depends on OF
+
 config COMMON_CLK_SCMI
 	tristate "Clock driver controlled via SCMI interface"
 	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST

drivers/clk/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
 obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
 obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_LOCHNAGAR)	+= clk-lochnagar.o
+obj-$(CONFIG_COMMON_CLK_HIFIBERRY_DACPRO)	+= clk-hifiberry-dacpro.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
 obj-$(CONFIG_ARCH_MILBEAUT_M10V)	+= clk-milbeaut.o

drivers/clk/clk-hifiberry-dacpro.c

@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015 Stuart MacLean
+ * Copyright (c) 2020 Intel Corporation
+ *
+ * Clock Driver for HiFiBerry DAC Pro
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+/* Clock rate of CLK44EN attached to GPIO6 pin */
+#define CLK_44EN_RATE 22579200UL
+/* Clock rate of CLK48EN attached to GPIO3 pin */
+#define CLK_48EN_RATE 24576000UL
+
+static struct gpiod_lookup_table pcm512x_gpios_table = {
+	/* .dev_id set during probe */
+	.table = {
+ GPIO_LOOKUP("pcm512x-gpio", 2, "PCM512x-GPIO3", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("pcm512x-gpio", 5, "PCM512x-GPIO6", GPIO_ACTIVE_HIGH),
+ { },
+	},
+};
+
+/**
+ * struct clk_hifiberry_hw - Common struct to the HiFiBerry DAC Pro
+ * @dev: device
+ * @hw: clk_hw for the common clk framework
+ * @mode: 0 => CLK44EN, 1 => CLK48EN
+ * @sclk_lookup: handle for "sclk"
+ * @gpio_44: gpiod desc for 44.1kHz support
+ * @gpio_48: gpiod desc for 48 kHz support
+ * @prepared: boolean caching clock state
+ * @gpio_initialized: boolean flag used to take gpio references.
+ */
+struct clk_hifiberry_hw {
+	struct device *dev;
+	struct clk_hw hw;
+	u8 mode;
+	struct clk_lookup *sclk_lookup;
+	struct gpio_desc *gpio_44;
+	struct gpio_desc *gpio_48;
+	bool prepared;
+	bool gpio_initialized;
+};
+
+#define to_hifiberry_clk(_hw) container_of(_hw, struct clk_hifiberry_hw, hw)
+
+static const struct of_device_id clk_hifiberry_dacpro_dt_ids[] = {
+	{ .compatible = "hifiberry,dacpro-clk",},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clk_hifiberry_dacpro_dt_ids);
+
+static unsigned long clk_hifiberry_dacpro_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+	return (to_hifiberry_clk(hw)->mode == 0) ? CLK_44EN_RATE :
+ CLK_48EN_RATE;
+}
+
+static long clk_hifiberry_dacpro_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+	long actual_rate;
+
+	if (rate <= CLK_44EN_RATE) {
+ actual_rate = (long)CLK_44EN_RATE;
+	} else if (rate >= CLK_48EN_RATE) {
+ actual_rate = (long)CLK_48EN_RATE;
+	} else {
+ long diff44Rate = (long)(rate - CLK_44EN_RATE);
+ long diff48Rate = (long)(CLK_48EN_RATE - rate);
+
+ if (diff44Rate < diff48Rate)
+ actual_rate = (long)CLK_44EN_RATE;
+ else
+ actual_rate = (long)CLK_48EN_RATE;
+	}
+	return actual_rate;
+}
+
+static int clk_hifiberry_dacpro_is_prepared(struct clk_hw *hw)
+{
+	struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw);
+
+	return clk->prepared;
+}
+
+static int clk_hifiberry_dacpro_prepare(struct clk_hw *hw)
+{
+	struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw);
+
+	/*
+ * The gpios are handled here to avoid any dependencies on
+ * probe.
+ *
+ * The user of the clock should verify with the PCM512
+ * registers that the clock are actually present and stable.
+ * This driver only toggles the relevant GPIOs.
+ */
+	if (!clk->gpio_initialized) {
+
+ clk->gpio_44 = devm_gpiod_get(clk->dev,
+ "PCM512x-GPIO6",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(clk->gpio_44)) {
+ dev_err(clk->dev, "gpio44 not found\n");
+ return PTR_ERR(clk->gpio_44);
+ }
+
+ clk->gpio_48 = devm_gpiod_get(clk->dev,
+ "PCM512x-GPIO3",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(clk->gpio_48)) {
+ dev_err(clk->dev, "gpio48 not found\n");
+ return PTR_ERR(clk->gpio_48);
+ }
+
+ clk->gpio_initialized = true;
+	}
+
+	if (clk->prepared)
+ return 0;
+
+	switch (clk->mode) {
+	case 0:
+ /* 44.1 kHz */
+ gpiod_set_value_cansleep(clk->gpio_44, 1);
+ break;
+	case 1:
+ /* 48 kHz */
+ gpiod_set_value_cansleep(clk->gpio_48, 1);
+ break;
+	default:
+ return -EINVAL;
+	}
+	/* wait for SCLK update to be detected by PCM512x codec */
+	usleep_range(5000, 10000);
+
+	clk->prepared = 1;
+
+	return 0;
+}
+
+static void clk_hifiberry_dacpro_unprepare(struct clk_hw *hw)
+{
+	struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw);
+
+	if (!clk->prepared)
+ return;
+
+	switch (clk->mode) {
+	case 0:
+ gpiod_set_value_cansleep(clk->gpio_44, 0);
+ break;
+	case 1:
+ gpiod_set_value_cansleep(clk->gpio_48, 0);
+ break;
+	default:
+ return;
+	}
+	/* wait for SCLK update to be detected by PCM512x codec */
+	usleep_range(5000, 10000);
+
+	clk->prepared = false;
+}
+
+static int clk_hifiberry_dacpro_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+	struct clk_hifiberry_hw *clk = to_hifiberry_clk(hw);
+	unsigned long actual_rate;
+
+	actual_rate = (unsigned long)clk_hifiberry_dacpro_round_rate(hw, rate,
+ &parent_rate);
+	clk->mode = (actual_rate == CLK_44EN_RATE) ? 0 : 1;
+	return 0;
+}
+
+static const struct clk_ops clk_hifiberry_dacpro_rate_ops = {
+	.is_prepared = clk_hifiberry_dacpro_is_prepared,
+	.prepare = clk_hifiberry_dacpro_prepare,
+	.unprepare = clk_hifiberry_dacpro_unprepare,
+	.recalc_rate = clk_hifiberry_dacpro_recalc_rate,
+	.round_rate = clk_hifiberry_dacpro_round_rate,
+	.set_rate = clk_hifiberry_dacpro_set_rate,
+};
+
+static int clk_hifiberry_dacpro_probe(struct platform_device *pdev)
+{
+	struct clk_hifiberry_hw *proclk;
+	struct clk_init_data init;
+	struct device *dev;
+	int ret;
+
+	dev = &pdev->dev;
+
+	pcm512x_gpios_table.dev_id = dev_name(dev);
+	gpiod_add_lookup_table(&pcm512x_gpios_table);
+
+	proclk = devm_kzalloc(dev, sizeof(*proclk), GFP_KERNEL);
+	if (!proclk)
+ return -ENOMEM;
+
+	init.name = "clk-hifiberry-dacpro";
+	init.ops = &clk_hifiberry_dacpro_rate_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+
+	proclk->dev = dev;
+	proclk->mode = 0;
+	proclk->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &proclk->hw);
+	if (ret) {
+ dev_err(dev, "Fail to register clock driver\n");
+ return ret;
+	}
+
+#ifndef CONFIG_ACPI
+	ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
+ &proclk->hw);
+#else
+	ret = devm_clk_hw_register_clkdev(dev, &proclk->hw,
+ init.name, NULL);
+#endif
+	if (ret) {
+ dev_err(dev, "Fail to add clock driver\n");
+ return ret;
+	}
+
+	proclk->sclk_lookup = clkdev_hw_create(&proclk->hw, "sclk", NULL);
+	if (!proclk->sclk_lookup) {
+#ifndef CONFIG_ACPI
+ of_clk_del_provider(dev->of_node);
+#endif
+ return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, proclk);
+
+	return ret;
+}
+
+static int clk_hifiberry_dacpro_remove(struct platform_device *pdev)
+{
+	struct clk_hifiberry_hw *proclk = platform_get_drvdata(pdev);
+
+	clkdev_drop(proclk->sclk_lookup);
+
+#ifndef CONFIG_ACPI
+	of_clk_del_provider(pdev->dev.of_node);
+#endif
+
+	return 0;
+}
+
+static struct platform_driver clk_hifiberry_dacpro_driver = {
+	.probe = clk_hifiberry_dacpro_probe,
+	.remove = clk_hifiberry_dacpro_remove,
+	.driver = {
+ .name = "clk-hifiberry-dacpro",
+ .of_match_table = clk_hifiberry_dacpro_dt_ids,
+	},
+};
+module_platform_driver(clk_hifiberry_dacpro_driver);
+
+MODULE_DESCRIPTION("HiFiBerry DAC Pro clock driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:clk-hifiberry-dacpro");

drivers/gpio/Kconfig

@@ -73,6 +73,10 @@ config GPIO_GENERIC
 	depends on HAS_IOMEM # Only for IOMEM drivers
 	tristate
 
+config GPIO_REGMAP
+	depends on REGMAP
+	tristate
+
 # put drivers in the right section, in alphabetical order
 
 # This symbol is selected by both I2C and SPI expanders

drivers/gpio/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_SYSFS)	+= gpiolib-sysfs.o
 obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
 
 # Device drivers. Generally keep list sorted alphabetically
+obj-$(CONFIG_GPIO_REGMAP)	+= gpio-regmap.o
 obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
 
 # directly supported by gpio-generic