Skip to content
BranchesTags

Repository files navigation

Maintenance level: 🟡 Occasional fixes

AnyShortcut

AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).

If you get any problems, please check out the section on Fusion 360 quirks.

Built-in Commands

The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.

Built-in commands include:

  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command

Screenshot

Recording

When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.

If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.

* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.

Screenshot

Usage

To set up a shortcut:

  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.

To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.

Fusion 360 Quirks

Be aware of the following quirks in Fusion 360™.

  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)

  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.

  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!

Supported Platforms

  • Windows
  • Mac OS

Installation

Download the add-in from the Releases page.

Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).

Make sure the directory is named AnyShortcut, with no suffix.

The new menu TOOLS -> ANYSHORTCUT is now available.

The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.

Ideas for commands to map

Here is a table of some commands that can be interesting to map.

CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.

Finding out what keys you have mapped

See KeyboardShortcutsSimple.

Reporting Issues

Please report any issues that you find in the add-in on the Issues page.

For better support, please include the steps you performed and the result. Also include copies of any error messages.

Author

This add-in is created by Thomas Axelsson.

License

This project is licensed under the terms of the MIT license. See LICENSE.

More Fusion 360™ Add-ins

My Fusion 360™ app store page

All my add-ins on Github

Changelog

  • v 1.1.2
    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1
    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0
    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3
    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2
    • Enable Run on Startup by default.
  • v 1.0.1
  • v 1.0.0
    • Fix Autodesk® app store review items
      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2
    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1
    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0
    • Restructured menus
    • Repeat last command
  • v 0.3.0
    • View orientation commands
    • Fusion quirks info

About

A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.

Topics

fusion-360fusion-360-api

Resources

Readme
MIT license
Activity

Stars

67 stars

Watchers

7 watching

Forks

5 forks
Report repository

Releases

Sponsor this project

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { // Add copy buttons to all 
 blocks
(function() {
function addCopyButtons() {
document.querySelectorAll('pre code').forEach(function(codeBlock) {
if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;
codeBlock.parentElement.setAttribute('data-copy-added', 'true');
var btn = document.createElement('button');
btn.textContent = 'Copy';
btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';
btn.onmouseover = function() { this.style.opacity = '1'; };
btn.onmouseout = function() { this.style.opacity = '0.7'; };
btn.onclick = function() {
navigator.clipboard.writeText(codeBlock.textContent).then(function() {
btn.textContent = 'Copied!';
setTimeout(function() { btn.textContent = 'Copy'; }, 1500);
});
};
codeBlock.parentElement.style.position = 'relative';
codeBlock.parentElement.appendChild(btn);
});
}
addCopyButtons();
// Re-run on dynamic content
var observer = new MutationObserver(addCopyButtons);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Force GitHub README to respect dark mode
(function() {
var style = document.createElement('style');
style.textContent = '
.markdown-body {
color-scheme: dark light;
}
.markdown-body pre { background: #161b22 !important; }
.markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }
.markdown-body table th, .markdown-body table td { border-color: #30363d !important; }
.markdown-body img { background: #0d1117; }
.markdown-body blockquote { border-left-color: #8b949e; }
.markdown-body hr { border-color: #30363d; }
';
document.head.appendChild(style);
})();
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Highlight search terms from Google/DuckDuckGo/Bing referrer
(function() {
var ref = document.referrer;
var terms = [];
if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {
var url = new URL(ref);
var q = url.searchParams.get('q') || url.searchParams.get('p');
if (q) {
terms = q.split(/\s+/).filter(function(t) { return t.length > 2; });
}
}
if (terms.length === 0) return;
var style = document.createElement('style');
style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';
document.head.appendChild(style);
function highlight(node) {
if (node.nodeType === 3) { // text node
var text = node.textContent;
var found = false;
terms.forEach(function(term) {
var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\]\\]/g, '\\') + ')', 'gi');
if (regex.test(text)) {
found = true;
var frag = document.createDocumentFragment();
var parts = text.split(regex);
parts.forEach(function(part, i) {
if (i % 2 === 0) {
frag.appendChild(document.createTextNode(part));
} else {
var span = document.createElement('span');
span.className = 'userscript-highlight';
span.textContent = part;
frag.appendChild(span);
}
});
node.parentNode.replaceChild(frag, node);
}
});
} else if (node.nodeType === 1 && node.childNodes) { // element
var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];
if (!skipTags.includes(node.tagName)) {
Array.from(node.childNodes).forEach(highlight);
}
}
}
highlight(document.body);
// Re-highlight on dynamic content
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1 || node.nodeType === 3) highlight(node);
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Strip utm_, fbclid, gclid, etc. from all links on page
(function() {
var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',
'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',
'ref', 'ref_src', 'source', 'medium', 'campaign'];
function cleanUrl(url) {
try {
var u = new URL(url, window.location.origin);
var changed = false;
trackingParams.forEach(function(p) {
if (u.searchParams.has(p)) {
u.searchParams.delete(p);
changed = true;
}
});
return changed ? u.toString() : url;
} catch (e) {
return url;
}
}
function cleanLinks() {
document.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
cleanLinks();
var observer = new MutationObserver(function(mutations) {
mutations.forEach(function(m) {
m.addedNodes.forEach(function(node) {
if (node.nodeType === 1) {
if (node.tagName === 'A') cleanLinks();
node.querySelectorAll('a[href]').forEach(function(a) {
var clean = cleanUrl(a.href);
if (clean !== a.href) a.href = clean;
});
}
});
});
});
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Auto-enable theater mode on YouTube
(function() {
function tryTheater() {
var btn = document.querySelector('button[aria-label="Theater mode"], ytd-player #player button[title="Theater mode"]');
if (btn && !btn.classList.contains('activated')) {
btn.click();
}
}
// Try immediately
tryTheater();
// Try after navigation (SPA)
var lastUrl = location.href;
setInterval(function() {
if (location.href !== lastUrl) {
lastUrl = location.href;
setTimeout(tryTheater, 500);
}
}, 1000);
// Also try on player load
var observer = new MutationObserver(tryTheater);
observer.observe(document.body, { childList: true, subtree: true });
})();
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Remove or un-stick sticky/fixed headers that block content
(function() {
function unstick() {
document.querySelectorAll('header, nav, [role="banner"], .header, .navbar, .sticky, .fixed-top, [style*="position: fixed"], [style*="position:sticky"]').forEach(function(el) {
if (el.style.position === 'fixed' || el.style.position === 'sticky' || getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {
el.style.position = 'static';
el.style.top = 'auto';
el.style.zIndex = 'auto';
}
});
}
unstick();
var observer = new MutationObserver(unstick);
observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });
})();
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
// Universal Dark Mode - works on any site
(function() {
var enabled = true;
function applyDarkMode() {
if (!enabled) return;
// Create style element if it doesn't exist
var style = document.getElementById('universal-dark-mode-style');
if (!style) {
style = document.createElement('style');
style.id = 'universal-dark-mode-style';
document.head.appendChild(style);
}
// Dark mode CSS - inverts colors but preserves images/video
style.textContent = '
/* Invert everything except media */
html {
filter: invert(1) hue-rotate(180deg) !important;
background: #1a1a2e !important;
}
/* Restore images, videos, iframes, canvas */
img, video, iframe, canvas, svg, picture, [style*="background-image"] {
filter: invert(1) hue-rotate(180deg) !important;
}
/* Preserve specific elements that should not be inverted */
.no-dark-mode, .no-dark-mode *,
[data-theme="light"], [data-theme="light"],
.ace_editor, .ace_editor *,
.CodeMirror, .CodeMirror *,
.monaco-editor, .monaco-editor *,
.markdown-body pre, .markdown-body pre *,
.highlight, .highlight *,
pre code, pre code * {
filter: none !important;
}
/* Fix common UI elements */
.modal, .popup, .dropdown-menu, .tooltip, .popover {
filter: invert(1) hue-rotate(180deg) !important;
background: #2d2d44 !important;
border-color: #444 !important;
}
/* Scrollbars */
::-webkit-scrollbar { background: #1a1a2e !important; }
::-webkit-scrollbar-thumb { background: #444 !important; }
::-webkit-scrollbar-thumb:hover { background: #555 !important; }
/* Selection */
::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }
';
}
function removeDarkMode() {
var style = document.getElementById('universal-dark-mode-style');
if (style) style.remove();
}
// Toggle with Alt+Shift+D
document.addEventListener('keydown', function(e) {
if (e.altKey && e.shiftKey && e.key === 'D') {
e.preventDefault();
enabled = !enabled;
if (enabled) {
applyDarkMode();
console.log('[Universal Dark Mode] Enabled');
} else {
removeDarkMode();
console.log('[Universal Dark Mode] Disabled');
}
}
});
// Apply on load
applyDarkMode();
// Re-apply on dynamic content
var observer = new MutationObserver(function(mutations) {
if (enabled && !document.getElementById('universal-dark-mode-style')) {
applyDarkMode();
}
});
observer.observe(document.head, { childList: true });
console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');
})();
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();
GitHub - thomasa88/AnyShortcut: A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands. · GitHub
Skip to content
BranchesTags
Repository files navigation
Maintenance level: 🟡 Occasional fixes
 AnyShortcut
AnyShortcut is an Autodesk® Fusion 360™ add-in for easily assigning keyboard shortcuts to commands where it is not usually possible to assign a shortcut*. It also has some built-in commands for Fusion 360™ commands that cannot easily be capture and run without some extra tweaking (e.g. Look At Sketch).
If you get any problems, please check out the section on Fusion 360 quirks.
Built-in Commands
The built-in commands are always visible in the AnyShortcut menu. Assign shortcuts to them in the usual way.
Built-in commands include:
  • Look At Sketch
  • Look At Selected or Sketch
  • Activate (containing) Component
  • Move history marker backwards/forwards
  • View orientation
  • Repeat last command
Screenshot
Recording
When enabled, the add-in records the resulting commands of actions that the user performs and collects them in the AnyShortcut menu. The commands in the menu can then be assigned shortcut keys in the regular way.
If not stopped, the recording stops automatically after a number of commands, to avoid any performance degradation when the user is not setting up shortcuts.
* Not all actions in Fusion 360™ result in "Commands" and some commands are not usable on their own. For example, Pick Circle/Arc Tangent does not generate a "Command" and Roll History Marker Here is triggered when clicking rewind in the history, but rewind actually first selects an item and then rolls.
Screenshot
Usage
To set up a shortcut:
  • Click Start recording and then perform the command you want to create a shortcut for
  • If you are lucky, the command will now have appeared at the bottom of the AnyShortcut menu.
  • Find the command in the menu and click the three dots to assign a shortcut as usual.
To remove a shortcut, follow the same procedure. Hint: You can press the shortcut to trigger the command to be run and make it appear in the recorder.
Fusion 360 Quirks
Be aware of the following quirks in Fusion 360™.
  • Even though you've added a shortcut, it might not show up next time you restart Fusion 360™. However, the shortcut still works and you see it if you open Change Keyboard Shortcut. (You can also verify using KeyboardShortcutsSimple)
  • Fusion 360™ cannot handle all key combinations. Forget Alt+Left to rollback history, because Fusion 360™ cannot save this combination and it will be broken next time you start Fusion 360™.
  • Menu items in sub-menus are not always clickable (bug). However, you don't need to be able to click the commands to map a shortcut!
Supported Platforms
  • Windows
  • Mac OS
Installation
Download the add-in from the Releases page.
Unpack it into API\AddIns (see How to install an add-in or script in Fusion 360).
Make sure the directory is named AnyShortcut, with no suffix.
The new menu TOOLS -> ANYSHORTCUT is now available.
The add-in can be temporarily disabled using the Scripts and Add-ins dialog. Press Shift+S in Fusion 360™ and go to the Add-Ins tab.
Ideas for commands to map
Here is a table of some commands that can be interesting to map.
CommandNotes
Rename, in the timelineLet's you select an item in the timeline and press F2 to rename it. I have not found any way to do this in the browser.
Look at (bottom toolbar)Select a face and orient the view normal to it. I have not found any way to tell it to "Look at" the current.
Isolate
Find in Browser
Find in Window
Activate ComponentWorks in the Browser and in the 3D space, but you must have selected a component in 3D space, not a body or a face.
RemoveOpposed to Delete,Remove appears as a timeline feature.
Simulate or other workspaceEasily switch to a workspace.
Finding out what keys you have mapped
See KeyboardShortcutsSimple.
Reporting Issues
Please report any issues that you find in the add-in on the Issues page.
For better support, please include the steps you performed and the result. Also include copies of any error messages.
Author
This add-in is created by Thomas Axelsson.
License
This project is licensed under the terms of the MIT license. See LICENSE.
More Fusion 360™ Add-ins
My Fusion 360™ app store page
All my add-ins on Github
Changelog
  • v 1.1.2

    • Fix selecCmd error for Look At commands. #12
  • v 1.1.1

    • Fix disabled Record button after Fusion 360™ update.
  • v 1.1.0

    • New custom icons for Look At, Activate and timeline actions.
  • v 1.0.3

    • Promote Record/Stop button to toolbar. Remove no-op AnyShortcut button.
  • v 1.0.2

    • Enable Run on Startup by default.
  • v 1.0.1

  • v 1.0.0

    • Fix Autodesk® app store review items

      • Promote menu to top-level
      • Icons that show intent
      • Fix Activate Component for root-level entities
    • Rename Tracker to Recorder
  • v 0.4.2

    • Change license to MIT
    • Avoid creating a settings file (not used)
  • v 0.4.1

    • Fix Repeat command
    • Avoid getting commands picked in Repeat command
  • v 0.4.0

    • Restructured menus
    • Repeat last command
  • v 0.3.0

    • View orientation commands
    • Fusion quirks info
About
A Fusion 360 add-in for easily assigning keyboard shortcuts to many commands.
Topics
fusion-360fusion-360-api
Resources
Readme
MIT license
Activity
Stars
67 stars
Watchers
7 watching
Forks
5 forks
Report repository
Releases
Sponsor this project
Packages
Contributors
Languages