basic-52

BASIC-52 running on CH552T with integrated USB-TTL using CH551G or CH552G. Software, Gerber and Examples included.

The Microcontroller Idea Book Circuits, Programs, & Applications featuring the 8052-BASIC Microcontroller by Jan Axelson

Intel original BASIC-52 version 1.1 source, hex and bin code. MCS-BASIC-52 Ver1.31 code along with I2C

BASIC programs

BASIC-52 running on WCH CH552E with internal xRAM at 24.00MHz internal oscillator. I2C pins assigned to P1.4 and P1.5 due to Rx and Tx pins.

BASIC-52 Ver 1.31 along with I2C and SFR read/write using internal RAM, OSC using WCH CH552T assembled using ASEM-51

BASIC-52 Ver 1.31 with I2C operating at 24MHz internal oscillator and xRAM

All the available versions of BASIC-52 capable of running on 8051 and 8052 architecture

BASIC-52 V1.31 + I2C running from 16kB ROM and 16kB RAM implemented inside MAX10 FPGA 10M08SAM153C8G

CH552X BASIC-52 V1.31 Int OSC 24MHz with I2C and SPI extensions. CH558/9 runs at 48MHz with I2C and SPI command extensions.

Highspeed BASIC-52 V1.31 + I2C softcore running from internal 12kB ROM and 4kB RAM implemented inside MAX10 FPGA.

BASIC-52 running on Cyclone IV at 11.0592 MHz, 25 MHz and 50 MHz. EPCS4 configuration flash. 50MHz oscillator pin 24 used. pin 25 unused. 27 MHz (pin 90 & 91) unused.

DE0-NANO EP4CE22F256 running BASIC-52 with I2C, SFR extensions at 50MHz. Tested with both USB-TTL CH341T and HC-06 Bluetooth module.

80C52 + 12kB ROM + 32kB RAM + I2C on Altera CYCLONE IV EP4CE10E22C8 running with BASIC-52 +I2C on 12kB ROM

80C52 + 8kB ROM + 4kB RAM on Altera CYCLONE 10 running with BASIC-52 on 8kB ROM

BASIC-52 running on QMTECH Cyclone IV EP4CE15F23 at 50 MHz. Tested with HC-06 Bluetooth module instead of using USB-TTL and working fine.

80C52 + 12kB ROM + 16kB RAM on Altera CYCLONE IV EP4CE6 running with BASIC-52 +I2C on 12kB ROM running at 50 MHz

WCH CH552T example programs using BASIC-52, KEIL, SDCC and ARDUINO