openbeken

Simple command line BK7231 flashing tool for SPI mode (not UART)

ESPHome configuration for the Avatto Tuya Wi-Fi Thermostat

Wire-free, OTA firmware migration toolchain & binaries for smart IoT devices (ORVIBO CT30W, X1S, etc.)

Alternative Web UI for TOMZN TOMPD-63 Smart relay with OpenBeken firmware

Умный счётчик электроэнергии на базе PZEM-004T и BK7231 (CB3S). Измеряет напряжение, ток, мощность, энергию с ежедневной/еженедельной/ежемесячной статистикой, расчёт стоимости и синхронизацию с внешним счётчиком. Имеет веб-интерфейс, локальное управление и настройку тарифа.

Flash the Tuya ZS3L (EFR32MG21) Zigbee NCP inside a WBRG1-based closed-firmware smart-home gateway into an open-source coordinator, entirely over WiFi via the OpenBeken bridge — no SWD, no soldering.

Flash OpenBeken onto an iWFCam BK-W8 (BK7252U) camera over WiFi via the vendor's own UDP telnet + http_ota.

Reverse-engineering + OpenBeken recipe to run the NEO NAS-WS05W WiFi water-leak sensor (BK7231N + FMD FT61F co-processor, low-power TuyaMCU) 100% local in Home Assistant

Home Assistant integration for OpenBK firmware updates with automatic device discovery and OTA support

Lightweight Prometheus exporter that collects real-time metrics from OpenBeken-based smart plugs

Passively sniff and decode bidirectional TuyaMCU UART serial communication between a main MCU and a Tuya WiFi/BLE module using two USB-to-serial adapters.

This repository contains custom **Oxidized models for IoT devices** not officially covered by Oxidized models.

Home Assistant HACS integration: a unified climate entity over MQTT for OpenBeken-flashed thermostats, via a per-model profile catalogue. Ships one profile so far (Moes BAC-002); contributions welcome.