Skip to content

Repository files navigation

Network Controller Designed For RC2014

This is a COM20020-based network controller board designed for the RC2014 microcomputer system. The module has been prepared for operation in the CP/Net local area network.

populated board

Bill of Materials

Component typeReferenceDescriptionQuantity
PCBNetwork Controller PCB - Version 1.11
Integrated CircuitU1COM20020ILJP - Arcnet Controller,28 pin PLCC1
Integrated CircuitU2SN75176 - Bus Transceiver, 8 pin DIP1
Integrated CircuitU374HCT138 - 3-to-8 line decoder, 16 pin DIP1
CrystalQ120 MHz, Crystal Oscillator, HC-49S1
Diode TVSD1 - D3SD05C , SOT3233
Pin HeaderJ140 pin header, 2.54 mm pitch, angle1
Connector ContactsJ2, J33 pin header, WF-03R 2.54 mm pitch, angle1
CapacitorC1, C227 pF, ceramic, 5 mm pitch2
CapacitorC3 - C60.1 uF, 50V, MLCC, 5 mm pitch4
ResistorR110 kohm, 0.25 W, axial1
ResistorR2120 ohm, 0.25 W, axial1
ResistorR3, R4, R710 ohm, 0.25 W, axial3
ResistorR5, R547 kohm, 0.25 W, axial2
IC SocketU128 pin PLCC, through hole1
IC SocketU28 pin DIP1
IC SocketU516 pin DIP1
JumperJP1Shunt, 2x8 pin 2.54 mm pitch1
JumperJP2Shunt, 3 pin 2.54 mm pitch1
JumperJP3 - JP5Shunt, 2 pin 2.54 mm pitch3

License

Copyright 2021 Tadeusz Pycio

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

About

Network Controller for RC2014

Topics

Resources

Stars

8 stars

Watchers

3 watching

Forks

Releases

Packages

Contributors