BranchesTags

Repository files navigation

Registry

A Docker image registry for use in the Deis open source PaaS.

This Docker image is based on the official docker distribution image.

Please add any issues you find with this software to the Distribution Project.

Deploying

If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.

If however, you want to build and use a custom image see the instructions below.

Build and Deploy

To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.

First, configure your environment to point to the registry location.

$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub

To build and push the image run:

$ make docker-build docker-push

Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:

 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"

Once updated, deploy the registry to your kubernetes cluster with:

$ make deploy

After a while, you should see one pod up with one running:

NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:

$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License

© 2014 Engine Yard, Inc.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

About

Repository for the Deis registry component.

Resources

Readme
Activity

Stars

0 stars

Watchers

1 watching

Forks

0 forks
Report repository

Releases

Packages

Contributors

Languages

, 'i'); if (__m === '*' || __re.test(location.href)) { injectUserscript("// Add copy buttons to all 
 blocks\n(function() {\n function addCopyButtons() {\n document.querySelectorAll('pre code').forEach(function(codeBlock) {\n if (codeBlock.parentElement.hasAttribute('data-copy-added')) return;\n codeBlock.parentElement.setAttribute('data-copy-added', 'true');\n \n var btn = document.createElement('button');\n btn.textContent = 'Copy';\n btn.style.cssText = 'position:absolute;top:4px;right:4px;padding:2px 8px;font-size:11px;background:#4ecdc4;border:none;border-radius:4px;color:#1a1a2e;cursor:pointer;opacity:0.7;transition:opacity 0.2s;';\n btn.onmouseover = function() { this.style.opacity = '1'; };\n btn.onmouseout = function() { this.style.opacity = '0.7'; };\n btn.onclick = function() {\n navigator.clipboard.writeText(codeBlock.textContent).then(function() {\n btn.textContent = 'Copied!';\n setTimeout(function() { btn.textContent = 'Copy'; }, 1500);\n });\n };\n codeBlock.parentElement.style.position = 'relative';\n codeBlock.parentElement.appendChild(btn);\n });\n }\n \n addCopyButtons();\n \n // Re-run on dynamic content\n var observer = new MutationObserver(addCopyButtons);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Add Copy Buttons to Code Blocks");
}
} catch(__e) { console.warn('[Userscript:Add Copy Buttons to Code Blocks]', __e); }
})();
(function(){
try {
var __m = "github.com";
var __re = new RegExp('^' + "github\\.com" + '

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Force GitHub README to respect dark mode\n(function() {\n var style = document.createElement('style');\n style.textContent = '\n .markdown-body {\n color-scheme: dark light;\n }\n .markdown-body pre { background: #161b22 !important; }\n .markdown-body code { background: rgba(110, 118, 129, 0.4) !important; }\n .markdown-body table th, .markdown-body table td { border-color: #30363d !important; }\n .markdown-body img { background: #0d1117; }\n .markdown-body blockquote { border-left-color: #8b949e; }\n .markdown-body hr { border-color: #30363d; }\n ';\n document.head.appendChild(style);\n})();", "GitHub Dark Mode README Fix");
}
} catch(__e) { console.warn('[Userscript:GitHub Dark Mode README Fix]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Highlight search terms from Google/DuckDuckGo/Bing referrer\n(function() {\n var ref = document.referrer;\n var terms = [];\n \n if (ref.includes('google.com') || ref.includes('duckduckgo.com') || ref.includes('bing.com')) {\n var url = new URL(ref);\n var q = url.searchParams.get('q') || url.searchParams.get('p');\n if (q) {\n terms = q.split(/\\s+/).filter(function(t) { return t.length > 2; });\n }\n }\n \n if (terms.length === 0) return;\n \n var style = document.createElement('style');\n style.textContent = '.userscript-highlight { background: #fbbf24; color: #1a1a2e; padding: 1px 3px; border-radius: 2px; }';\n document.head.appendChild(style);\n \n function highlight(node) {\n if (node.nodeType === 3) { // text node\n var text = node.textContent;\n var found = false;\n terms.forEach(function(term) {\n var regex = new RegExp('(' + term.replace(/[.*+?^${}()|[\\]\\\\]/g, '\\\\') + ')', 'gi');\n if (regex.test(text)) {\n found = true;\n var frag = document.createDocumentFragment();\n var parts = text.split(regex);\n parts.forEach(function(part, i) {\n if (i % 2 === 0) {\n frag.appendChild(document.createTextNode(part));\n } else {\n var span = document.createElement('span');\n span.className = 'userscript-highlight';\n span.textContent = part;\n frag.appendChild(span);\n }\n });\n node.parentNode.replaceChild(frag, node);\n }\n });\n } else if (node.nodeType === 1 && node.childNodes) { // element\n var skipTags = ['SCRIPT', 'STYLE', 'NOSCRIPT', 'TEXTAREA', 'INPUT', 'SELECT'];\n if (!skipTags.includes(node.tagName)) {\n Array.from(node.childNodes).forEach(highlight);\n }\n }\n }\n \n highlight(document.body);\n \n // Re-highlight on dynamic content\n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1 || node.nodeType === 3) highlight(node);\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Highlight Search Terms");
}
} catch(__e) { console.warn('[Userscript:Highlight Search Terms]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Strip utm_, fbclid, gclid, etc. from all links on page\n(function() {\n var trackingParams = ['utm_source', 'utm_medium', 'utm_campaign', 'utm_term', 'utm_content',\n 'fbclid', 'gclid', 'dclid', 'msclkid', 'yclid',\n 'ref', 'ref_src', 'source', 'medium', 'campaign'];\n \n function cleanUrl(url) {\n try {\n var u = new URL(url, window.location.origin);\n var changed = false;\n trackingParams.forEach(function(p) {\n if (u.searchParams.has(p)) {\n u.searchParams.delete(p);\n changed = true;\n }\n });\n return changed ? u.toString() : url;\n } catch (e) {\n return url;\n }\n }\n \n function cleanLinks() {\n document.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n \n cleanLinks();\n \n var observer = new MutationObserver(function(mutations) {\n mutations.forEach(function(m) {\n m.addedNodes.forEach(function(node) {\n if (node.nodeType === 1) {\n if (node.tagName === 'A') cleanLinks();\n node.querySelectorAll('a[href]').forEach(function(a) {\n var clean = cleanUrl(a.href);\n if (clean !== a.href) a.href = clean;\n });\n }\n });\n });\n });\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "Remove Tracking Parameters from Links");
}
} catch(__e) { console.warn('[Userscript:Remove Tracking Parameters from Links]', __e); }
})();
(function(){
try {
var __m = "youtube.com";
var __re = new RegExp('^' + "youtube\\.com" + '

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Auto-enable theater mode on YouTube\n(function() {\n function tryTheater() {\n var btn = document.querySelector('button[aria-label=\"Theater mode\"], ytd-player #player button[title=\"Theater mode\"]');\n if (btn && !btn.classList.contains('activated')) {\n btn.click();\n }\n }\n \n // Try immediately\n tryTheater();\n \n // Try after navigation (SPA)\n var lastUrl = location.href;\n setInterval(function() {\n if (location.href !== lastUrl) {\n lastUrl = location.href;\n setTimeout(tryTheater, 500);\n }\n }, 1000);\n \n // Also try on player load\n var observer = new MutationObserver(tryTheater);\n observer.observe(document.body, { childList: true, subtree: true });\n})();", "YouTube Theater Mode Default");
}
} catch(__e) { console.warn('[Userscript:YouTube Theater Mode Default]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Remove or un-stick sticky/fixed headers that block content\n(function() {\n function unstick() {\n document.querySelectorAll('header, nav, [role=\"banner\"], .header, .navbar, .sticky, .fixed-top, [style*=\"position: fixed\"], [style*=\"position:sticky\"]').forEach(function(el) {\n if (el.style.position === 'fixed' || el.style.position === 'sticky' || \n getComputedStyle(el).position === 'fixed' || getComputedStyle(el).position === 'sticky') {\n el.style.position = 'static';\n el.style.top = 'auto';\n el.style.zIndex = 'auto';\n }\n });\n }\n \n unstick();\n \n var observer = new MutationObserver(unstick);\n observer.observe(document.body, { childList: true, subtree: true, attributes: true, attributeFilter: ['style', 'class'] });\n})();", "Kill Sticky Headers");
}
} catch(__e) { console.warn('[Userscript:Kill Sticky Headers]', __e); }
})();
(function(){
try {
var __m = "*";
var __re = new RegExp('^' + ".*" + '

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages

, 'i');
if (__m === '*' || __re.test(location.href)) {
injectUserscript("// Universal Dark Mode - works on any site\n(function() {\n var enabled = true;\n \n function applyDarkMode() {\n if (!enabled) return;\n \n // Create style element if it doesn't exist\n var style = document.getElementById('universal-dark-mode-style');\n if (!style) {\n style = document.createElement('style');\n style.id = 'universal-dark-mode-style';\n document.head.appendChild(style);\n }\n \n // Dark mode CSS - inverts colors but preserves images/video\n style.textContent = '\n /* Invert everything except media */\n html {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #1a1a2e !important;\n }\n \n /* Restore images, videos, iframes, canvas */\n img, video, iframe, canvas, svg, picture, [style*=\"background-image\"] {\n filter: invert(1) hue-rotate(180deg) !important;\n }\n \n /* Preserve specific elements that should not be inverted */\n .no-dark-mode, .no-dark-mode *,\n [data-theme=\"light\"], [data-theme=\"light\"],\n .ace_editor, .ace_editor *,\n .CodeMirror, .CodeMirror *,\n .monaco-editor, .monaco-editor *,\n .markdown-body pre, .markdown-body pre *,\n .highlight, .highlight *,\n pre code, pre code * {\n filter: none !important;\n }\n \n /* Fix common UI elements */\n .modal, .popup, .dropdown-menu, .tooltip, .popover {\n filter: invert(1) hue-rotate(180deg) !important;\n background: #2d2d44 !important;\n border-color: #444 !important;\n }\n \n /* Scrollbars */\n ::-webkit-scrollbar { background: #1a1a2e !important; }\n ::-webkit-scrollbar-thumb { background: #444 !important; }\n ::-webkit-scrollbar-thumb:hover { background: #555 !important; }\n \n /* Selection */\n ::selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ::-moz-selection { background: #4ecdc4 !important; color: #1a1a2e !important; }\n ';\n }\n \n function removeDarkMode() {\n var style = document.getElementById('universal-dark-mode-style');\n if (style) style.remove();\n }\n \n // Toggle with Alt+Shift+D\n document.addEventListener('keydown', function(e) {\n if (e.altKey && e.shiftKey && e.key === 'D') {\n e.preventDefault();\n enabled = !enabled;\n if (enabled) {\n applyDarkMode();\n console.log('[Universal Dark Mode] Enabled');\n } else {\n removeDarkMode();\n console.log('[Universal Dark Mode] Disabled');\n }\n }\n });\n \n // Apply on load\n applyDarkMode();\n \n // Re-apply on dynamic content\n var observer = new MutationObserver(function(mutations) {\n if (enabled && !document.getElementById('universal-dark-mode-style')) {\n applyDarkMode();\n }\n });\n observer.observe(document.head, { childList: true });\n \n console.log('[Universal Dark Mode] Loaded - Press Alt+Shift+D to toggle');\n})();", "Universal Dark Mode");
}
} catch(__e) { console.warn('[Userscript:Universal Dark Mode]', __e); }
})();
})();

Skip to content
BranchesTags
Repository files navigation
Registry
A Docker image registry for use in the Deis open source PaaS.
This Docker image is based on the official docker distribution image.
Please add any issues you find with this software to the Distribution Project.
Deploying
If you want to use the latest registry image built by they Deis team you can simply start a registry via make deploy.
If however, you want to build and use a custom image see the instructions below.
Build and Deploy
To build a dev release of this image, you will also need a registry to hold the custom images. This can be your own registry, Dockerhub, or Quay.
First, configure your environment to point to the registry location.
$ export DEIS_REGISTRY=myregistry.com:5000 # or quay.io, if using Dockerhub, leave this unset
$ export IMAGE_PREFIX=youruser/ # if using Quay or Dockerhub
To build and push the image run:
$ make docker-build docker-push
Before deploying your custom image you must update the container image specification in the pod manifest. This file is found at contrib/kubernetes/manifests/registry-rc.yaml:
 - name: registryimage: quay.io/youruser/registry:git-f5c7dc3env:
- name: REGISTRY_STORAGE_DELETE_ENABLEDvalue: "true"
Once updated, deploy the registry to your kubernetes cluster with:
$ make deploy

After a while, you should see one pod up with one running:
NAME READY STATUS RESTARTS AGE
registry-6wy8o 1/1 Running 0 32s

You can then interact with this pod as you would with any other Kubernetes pod:
$ kubectl logs -f registry-6wy8o
$ kubectl exec -it registry-6wy8o sh

License
© 2014 Engine Yard, Inc.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
About
Repository for the Deis registry component.
Resources
Readme
Activity
Stars
0 stars
Watchers
1 watching
Forks
0 forks
Report repository
Releases
Packages
Contributors
Languages