hyprfloat is a Lua script that provides enhanced window management features for Hyprland, including a GNOME-style overview, floating window snapping, and more.
Demonstration.mp4
Install the required dependencies. Example using yay in Arch Linux:
yay -S lua lua-posix lua-lgi lua-cjson grim-hyprland
Run the install script
curl -fsSL https://raw.githubusercontent.com/yz778/hyprfloat/main/install.sh | sh(Optional) Install and customize the default configuration file.
hyprfloat install-config
The configuration will be placed at
~/.config/hypr/hyprfloat.config.lua.Add bindings and rules to your
~/.config/hypr/hyprland.conf
- ALT-Tab Window Switching: A window switcher with MRU (Most-Recently-Used) focus, search / preview, and an option to switch between windows of the same class. To search through previews, keep holding the ALT key down as you type.
ALT-Tab.Window.Switching.mp4
Workspace Overview: Arranges all windows into a grid, similar to GNOME's overview.
Float Mode: Toggles all windows between tiling and floating, with customizable Hyprland settings for each mode.
Window Snapping: Snaps the active window to fractional portions of the screen.
Window Centering: Centers the active window, with an option to scale it.
Multi-monitor Support: Move windows between monitors while maintaining relative size and position.
Workspace Groups: Group workspaces together and cycle through them. This is useful for multi-monitor setups.
Switches focus to the next or previous window in the focus history.Arguments:
<next|prev>Required. Specifies whether to switch to the next or the previous window.[sameclass]Optional. If provided, the window selection is restricted to windows of the same class as the currently active window.
Centers the active window in the middle of the screen and applies a scaling factor.Arguments:
<scale>Required. A number to scale the window size (e.g., 1.0 for original size, 1.2 to enlarge, 0.8 to shrink).
Runs a command as defined in `dynamic_bind` configuration, choosing the appropriate one for the current window mode (floating or tiling).Arguments:
<binding>(required): The binding name as defined in yourdynamic_bindconfiguration.
Connects to the Hyprland event socket and prints all incoming events to the console. Useful for debugging.
Copies the default configuration file to the user's config directory, allowing for user-specific customizations.
Move floating window focus by proximity in a given direction with wrapping support.The algorithm treats floating windows as positioned in a 2D matrix and finds the nearest window in the specified direction. If no window exists in that direction, it wraps around to the opposite side.
Arguments:
<direction>Required. Direction to move focus:
u- Focus nearest window above (wraps to bottom)d- Focus nearest window below (wraps to top)l- Focus nearest window to the left (wraps to right)r- Focus nearest window to the right (wraps to left)Behavior:
- Only considers floating windows on the current workspace
- Uses window center points for distance calculations
- Prioritizes windows in the target direction, then falls back to wrapping
- Secondary sorting by distance for tie-breaking
Moves the active window to a different monitor while maintaining its relative position and size.Arguments:
<direction>Required. A number indicating which monitor to move to (+1 for next, -1 for previous).
Toggles a GNOME-style workspace overview, arranging all windows in a grid. Running the command again will exit overview mode.
Snaps the active window to a fractional portion of the screen.Arguments:
<x0>Required. Left position as a fraction of screen width (e.g., 0.0).<x1>Required. Right position as a fraction of screen width (e.g., 0.5 for half width).<y0>Required. Top position as a fraction of screen height (e.g., 0.0).<y1>Required. Bottom position as a fraction of screen height (e.g., 1.0 for full height).
Prints workspaces and current mode, typically for use with Waybar.
Switches all windows in the current workspace between floating and tiling layouts.Arguments:
[on|off]Optional. Explicitly set all windows to floating ('on') or tiling ('off'). If omitted, it toggles the current state.
Prints the current version of hyprfloat.
Manages groups of workspaces, useful for multi-monitor setups.Arguments:
<next|prev>Switches to the next or previous workspace group.<status>DEPRECATED: Usehyprctl statusinstead.<group>Switches to a specific workspace group by number.<move>Presents a UI to move the active window to a different workspace group.
Add bindings and rules to your hyprland.conf. Here is an example hyprfloat.conf configuration that you can add:
source = ~/.config/hypr/hyprfloat.confHere is a sample configuration that shows how I synchronize workspace changes across my three monitors.
~/.config/hypr/hyprland.conf
monitor=DP-1,1280x1024@75,0x0,1
monitor=DP-3,2560x1440@143,1280x0,1
monitor=HDMI-A-1,1280x1024@75,3840x0,1
# group 1workspace=1, monitor:DP-1, persistent:true
workspace=2, monitor:DP-3, persistent:true
workspace=3, monitor:HDMI-A-1, persistent:true
# group 2workspace=4, monitor:DP-1, persistent:true
workspace=5, monitor:DP-3, persistent:true
workspace=6, monitor:HDMI-A-1, persistent:true
# group 3workspace=7, monitor:DP-1, persistent:true
workspace=8, monitor:DP-3, persistent:true
workspace=9, monitor:HDMI-A-1, persistent:true~/.config/waybar/config.jsonc
"custom/workspacegroup": {
"exec": "hyprfloat workspacegroup status",
"interval": "once",
"format": "{text}",
"on-click": "hyprfloat workspacegroup next",
"tooltip": false,
"signal": 8
}~/.config/hypr/hyprfloat.config.lua
workspacegroup= {
icons= {
active=" ",
default=" ",
},
groups= {
{ 1, 2, 3 }, -- monitor 1
{ 4, 5, 6 }, -- monitor 2
{ 7, 8, 9 }, -- monitor 3
},
commands= {
"pkill -RTMIN+8 waybar"
}
}