Update build args and find program for API changes

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.

[mattnite]

This does change the usage of hello client subcommand. Before we had an assumption that if only one arg was passedd in, you'd default to the hello server. If you passed more than one in, the second argument is expected to be a path to the server binary.

With the changes to Zig master, we can only pass through the args on the commandline, not inspect them. I've worked around this behavior by passing in the server binary explicitly using a named option over an arg positional.

[codecov-commenter]

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 98.94%. Comparing base (b886a2b) to head (b868680).

Additional details and impacted files

@@ Coverage Diff @@## main #38 +/- ##
=======================================
Coverage 98.94% 98.94% =======================================
Files 3 3 Lines 1514 1515 +1 =======================================
+ Hits 1498 1499 +1 
Misses 16 16 

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

• ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

[Techatrix]

The setup of the hello client example is a bit messy which I was planning to rework anyway so this should be fine.

The banner in the install steps on the README should be updated to this:

> [!NOTE]
> The default branch requires Zig `0.17.0-dev.601+0ff175b69` or later. Checkout the `0.16.x` branch when using Zig 0.16

I will take care of creating the 0.16.x branch.