[DO NOT MERGE] test: verify Codecov across all 4 submodules

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).

[jam-jee]

⚠️ DO NOT MERGE — verification PR

Appends a no-op comment to each of the four submodule __init__.py files (core / train / serve / mlops) so all four unit-test jobs run and upload coverage.

Why all 4

The merged codecov.yml currently has after_n_builds: 4 (fix in flight: #6056). Codecov waits for 4 uploads before finalizing, so single-submodule PRs never get a report (seen on #6055: state=error, sessions=0). Touching all four submodules produces 4 uploads, letting the report finalize even under the current config.

What this verifies

With master's codecov.yml applied, once all 4 uploads land Codecov should show:

• test files excluded via the ignore: list (previously ~98% of measured files were test files)
• project ~71% product-only, not the old test-inflated ~90%
• status targets project 65% / patch 70%

Note: the CI buildspec still runs --cov=. (the --cov=sagemaker change is a separate internal CR), so this validates the server-side ignore: layer. If coverage lands near ~71% with 0 test files, the ignore: layer is sufficient on its own.

Same-repo branch (fork PRs upload without PR context and error — see closed#6054). Will be closed without merging once verified.

[jam-jee]

Closing — verification complete. This 4-submodule PR surfaced two CodeBuild→Codecov uploader bugs: uploads carry empty branch / pr=false (no PR association → no status) and no per-submodule flags (sessions failed to merge → collapsed to sessions=1, 3 files, 37%). Needs an uploader fix in the CI-infra buildspec (-B/-P/-F args).