Starlight DTS cleanups and LED support by geertu · Pull Request #1 · esmil/linux

geertu · 2021-05-07T14:29:48Z

No description provided.

There is no need to use the "clock-output-names" property for fixed clocks, as the clock's name can be derived from the clock node's name. Fixes: c653fe8 ("riscv: dts: Add JH7100 and BeagleV Starlight support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

"make dtbs_check": arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: /: qspi-clk@0: 'anyOf' conditional failed, one must be fixed: 'reg' is a required property 'ranges' is a required property From schema: dtschema/schemas/root-node.yaml Fix this by removing the bogus unit-address from the qspi-clk node. Fixes: c653fe8 ("riscv: dts: Add JH7100 and BeagleV Starlight support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Interrupt controllers should have "#interrupt-cells". arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: gpio@11910000: 'gpio-controller' is a dependency of '#gpio-cells' GPIO controllers should be marked with "gpio-controller". Fixes: c653fe8 ("riscv: dts: Add JH7100 and BeagleV Starlight support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: soc: cache-controller@2010000:reg:0: [0, 33619968, 0, 4096, 0, 134217728, 0, 33554432] is too long From schema: dtschema/schemas/simple-bus.yaml arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: soc: spi@11860000:reg:0: [0, 293994496, 0, 65536, 0, 536870912, 0, 536870912] is too long From schema: dtschema/schemas/simple-bus.yaml arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: soc: xrp@f0000000:reg:0: [0, 4026531840, 0, 33554431, 16, 1912602624, 0, 4096, 16, 1912606720, 0, 16773120, 0, 306905088, 0, 65536] is too long To improve human readability and enable automatic validation, the tuples in "reg" properties should be grouped using angle brackets. Fixes: c653fe8 ("riscv: dts: Add JH7100 and BeagleV Starlight support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: hs_serial@11870000: $nodename:0: 'hs_serial@11870000' does not match '^serial(@[0-9a-f,]+)*$' arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: hs_serial@11880000: $nodename:0: 'hs_serial@11880000' does not match '^serial(@[0-9a-f,]+)*$' arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: sgdma1p@10500000: $nodename:0: 'sgdma1p@10500000' does not match '^dma-controller(@.*)?$' arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: sgdma2p@100b0000: $nodename:0: 'sgdma2p@100b0000' does not match '^dma-controller(@.*)?$' arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: gmac@10020000: $nodename:0: 'gmac@10020000' does not match '^ethernet(@.*)?$' arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: sdio0@10000000: $nodename:0: 'sdio0@10000000' does not match '^mmc(@.*)?$' arch/riscv/boot/dts/starfive/jh7100-starlight.dt.yaml: sdio1@10010000: $nodename:0: 'sdio1@10010000' does not match '^mmc(@.*)?$' Use generic node names, to comply with the generic names recommendation in the devicetree specification. Fixes: c653fe8 ("riscv: dts: Add JH7100 and BeagleV Starlight support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Add a device node for the LED labeled "ack", and use it as a heartbeat. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

esmil · 2021-05-07T14:44:04Z

This looks great, thank you. I was just about to look at adding the LED.

I'll just merge this as is for now, but before sending it upstream we'll probably need to merge it into 1 or 2 patches. Do you mind if squash these into a single devicetree commit in my tree before that happens?

geertu · 2021-05-07T14:47:06Z

Feel free to squash them.

commit eaab1d4 upstream. Since commit 6815f47 ("ovl: use only uppermetacopy state in ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a metacopy error, which leads to dentry leaks when shutting down the related superblock: overlayfs: refusing to follow metacopy origin for (/file0) ... BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay] ... WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1 ... RIP: 0010:umount_check.cold+0x107/0x14d ... Call Trace: d_walk+0x28c/0x950 ? dentry_lru_isolate+0x2b0/0x2b0 ? __kasan_slab_free+0x12/0x20 do_one_tree+0x33/0x60 shrink_dcache_for_umount+0x78/0x1d0 generic_shutdown_super+0x70/0x440 kill_anon_super+0x3e/0x70 deactivate_locked_super+0xc4/0x160 deactivate_super+0xfa/0x140 cleanup_mnt+0x22e/0x370 __cleanup_mnt+0x1a/0x30 task_work_run+0x139/0x210 do_exit+0xb0c/0x2820 ? __kasan_check_read+0x1d/0x30 ? find_held_lock+0x35/0x160 ? lock_release+0x1b6/0x660 ? mm_update_next_owner+0xa20/0xa20 ? reacquire_held_locks+0x3f0/0x3f0 ? __sanitizer_cov_trace_const_cmp4+0x22/0x30 do_group_exit+0x135/0x380 __do_sys_exit_group.isra.0+0x20/0x20 __x64_sys_exit_group+0x3c/0x50 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae ... VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day... This fix has been tested with a syzkaller reproducer. Cc: Amir Goldstein <amir73il@gmail.com> Cc: <stable@vger.kernel.org> # v5.8+ Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 6815f47 ("ovl: use only uppermetacopy state in ovl_lookup()") Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com> Link: https://lore.kernel.org/r/20210329164907.2133175-1-mic@digikod.net Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f02d408 upstream. Commit a6dcfe0 ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs. Link: https://lore.kernel.org/r/20210412165740.39318-1-r.bolshakov@yadro.com Fixes: a6dcfe0 ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") Cc: Daniel Wagner <daniel.wagner@suse.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org # 5.11+ Reported-by: Aleksandr Volkov <a.y.volkov@yadro.com> Reported-by: Aleksandr Miloserdov <a.miloserdov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a97709f upstream. We triggered the following error while running our 4.19 kernel with the pseudo-NMI patches backported to it: [ 14.816231] ------------[ cut here ]------------ [ 14.816231] kernel BUG at irq.c:99! [ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP [ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____)) [ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14 [ 14.816233] Hardware name: evb (DT) [ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 14.816234] pc : asm_nmi_enter+0x94/0x98 [ 14.816235] lr : asm_nmi_enter+0x18/0x98 [ 14.816235] sp : ffff000008003c50 [ 14.816235] pmr_save: 00000070 [ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0 [ 14.816238] x27: 0000000000000000 x26: ffff000008004000 [ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000 [ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc [ 14.816241] x21: ffff000008003da0 x20: 0000000000000060 [ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff [ 14.816243] x17: 0000000000000008 x16: 003d090000000000 [ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40 [ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000 [ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5 [ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f [ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e [ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000 [ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000 [ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0 [ 14.816251] Call trace: [ 14.816251] asm_nmi_enter+0x94/0x98 [ 14.816251] el1_irq+0x8c/0x180 (IRQ C) [ 14.816252] gic_handle_irq+0xbc/0x2e4 [ 14.816252] el1_irq+0xcc/0x180 (IRQ B) [ 14.816253] arch_timer_handler_virt+0x38/0x58 [ 14.816253] handle_percpu_devid_irq+0x90/0x240 [ 14.816253] generic_handle_irq+0x34/0x50 [ 14.816254] __handle_domain_irq+0x68/0xc0 [ 14.816254] gic_handle_irq+0xf8/0x2e4 [ 14.816255] el1_irq+0xcc/0x180 (IRQ A) [ 14.816255] arch_cpu_idle+0x34/0x1c8 [ 14.816255] default_idle_call+0x24/0x44 [ 14.816256] do_idle+0x1d0/0x2c8 [ 14.816256] cpu_startup_entry+0x28/0x30 [ 14.816256] rest_init+0xb8/0xc8 [ 14.816257] start_kernel+0x4c8/0x4f4 [ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000) [ 14.816258] Modules linked in: start_dp(O) smeth(O) [ 15.103092] ---[ end trace 701753956cb14aa8 ]--- [ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt [ 15.103099] SMP: stopping secondary CPUs [ 15.103100] Kernel Offset: disabled [ 15.103100] CPU features: 0x36,a2400218 [ 15.103100] Memory Limit: none which is cause by a 'BUG_ON(in_nmi())' in nmi_enter(). From the call trace, we can find three interrupts (noted A, B, C above): interrupt (A) is preempted by (B), which is further interrupted by (C). Subsequent investigations show that (B) results in nmi_enter() being called, but that it actually is a spurious interrupt. Furthermore, interrupts are reenabled in the context of (B), and (C) fires with NMI priority. We end-up with a nested NMI situation, something we definitely do not want to (and cannot) handle. The bug here is that spurious interrupts should never result in any state change, and we should just return to the interrupted context. Moving the handling of spurious interrupts as early as possible in the GICv3 handler fixes this issue. Fixes: 3f1f323 ("irqchip/gic-v3: Switch to PMR masking before calling IRQ handler") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: He Ying <heying24@huawei.com> [maz: rewrote commit message, corrected Fixes: tag] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210423083516.170111-1-heying24@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…after-free commit 061dde8 upstream. There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it waits for the transaction's 'num_writers' counter to reach a value of 1 (no one else attached to the transaction), so it jumps to the label "cleanup_transaction"; 5) Task A then calls cleanup_transaction(), where it aborts the transaction, setting BTRFS_FS_STATE_TRANS_ABORTED on fs_info->fs_state, setting the ->aborted field of the transaction and the handle to an errno value and also setting BTRFS_FS_STATE_ERROR on fs_info->fs_state. After that, at cleanup_transaction(), it deletes the transaction from the list of transactions (fs_info->trans_list), sets the transaction to the state TRANS_STATE_COMMIT_DOING and then waits for the number of writers to go down to 1, as it's currently 2 (1 for task A and 1 for task B); 6) The transaction kthread is running and sees that BTRFS_FS_STATE_ERROR is set in fs_info->fs_state, so it calls btrfs_cleanup_transaction(). There it sees the list fs_info->trans_list is empty, and then proceeds into calling btrfs_drop_all_logs(), which frees the log root tree with a call to btrfs_free_log_root_tree(); 7) Task B calls write_all_supers() and, shortly after, under the label 'out_wake_log_root', it deferences the pointer stored in 'log_root_tree', which was already freed in the previous step by the transaction kthread. This results in a use-after-free leading to a crash. Fix this by deleting the transaction from the list of transactions at cleanup_transaction() only after setting the transaction state to TRANS_STATE_COMMIT_DOING and waiting for all existing tasks that are attached to the transaction to release their transaction handles. This makes the transaction kthread wait for all the tasks attached to the transaction to be done with the transaction before dropping the log roots and doing other cleanups. Fixes: ef67963 ("btrfs: drop logs when we've aborted a transaction") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ocations [ Upstream commit eafa4fd ] When we are running out of space for updating the chunk tree, that is, when we are low on available space in the system space info, if we have many task concurrently allocating block groups, via fallocate for example, many of them can end up all allocating new system chunks when only one is needed. In extreme cases this can lead to exhaustion of the system chunk array, which has a size limit of 2048 bytes, and results in a transaction abort with errno EFBIG, producing a trace in dmesg like the following, which was triggered on a PowerPC machine with a node/leaf size of 64K: [1359.518899] ------------[ cut here ]------------ [1359.518980] BTRFS: Transaction aborted (error -27) [1359.519135] WARNING: CPU: 3 PID: 16463 at ../fs/btrfs/block-group.c:1968 btrfs_create_pending_block_groups+0x340/0x3c0 [btrfs] [1359.519152] Modules linked in: (...) [1359.519239] Supported: Yes, External [1359.519252] CPU: 3 PID: 16463 Comm: stress-ng Tainted: G X 5.3.18-47-default #1 SLE15-SP3 [1359.519274] NIP: c008000000e36fe8 LR: c008000000e36fe4 CTR: 00000000006de8e8 [1359.519293] REGS: c00000056890b700 TRAP: 0700 Tainted: G X (5.3.18-47-default) [1359.519317] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48008222 XER: 00000007 [1359.519356] CFAR: c00000000013e170 IRQMASK: 0 [1359.519356] GPR00: c008000000e36fe4 c00000056890b990 c008000000e83200 0000000000000026 [1359.519356] GPR04: 0000000000000000 0000000000000000 0000d52a3b027651 0000000000000007 [1359.519356] GPR08: 0000000000000003 0000000000000001 0000000000000007 0000000000000000 [1359.519356] GPR12: 0000000000008000 c00000063fe44600 000000001015e028 000000001015dfd0 [1359.519356] GPR16: 000000000000404f 0000000000000001 0000000000010000 0000dd1e287affff [1359.519356] GPR20: 0000000000000001 c000000637c9a000 ffffffffffffffe5 0000000000000000 [1359.519356] GPR24: 0000000000000004 0000000000000000 0000000000000100 ffffffffffffffc0 [1359.519356] GPR28: c000000637c9a000 c000000630e09230 c000000630e091d8 c000000562188b08 [1359.519561] NIP [c008000000e36fe8] btrfs_create_pending_block_groups+0x340/0x3c0 [btrfs] [1359.519613] LR [c008000000e36fe4] btrfs_create_pending_block_groups+0x33c/0x3c0 [btrfs] [1359.519626] Call Trace: [1359.519671] [c00000056890b990] [c008000000e36fe4] btrfs_create_pending_block_groups+0x33c/0x3c0 [btrfs] (unreliable) [1359.519729] [c00000056890ba90] [c008000000d68d44] __btrfs_end_transaction+0xbc/0x2f0 [btrfs] [1359.519782] [c00000056890bae0] [c008000000e309ac] btrfs_alloc_data_chunk_ondemand+0x154/0x610 [btrfs] [1359.519844] [c00000056890bba0] [c008000000d8a0fc] btrfs_fallocate+0xe4/0x10e0 [btrfs] [1359.519891] [c00000056890bd00] [c0000000004a23b4] vfs_fallocate+0x174/0x350 [1359.519929] [c00000056890bd50] [c0000000004a3cf8] ksys_fallocate+0x68/0xf0 [1359.519957] [c00000056890bda0] [c0000000004a3da8] sys_fallocate+0x28/0x40 [1359.519988] [c00000056890bdc0] [c000000000038968] system_call_exception+0xe8/0x170 [1359.520021] [c00000056890be20] [c00000000000cb70] system_call_common+0xf0/0x278 [1359.520037] Instruction dump: [1359.520049] 7d0049ad 40c2fff4 7c0004ac 71490004 40820024 2f83fffb 419e0048 3c620000 [1359.520082] e863bcb8 7ec4b378 48010d91 e8410018 <0fe00000> 3c820000 e884bcc8 7ec6b378 [1359.520122] ---[ end trace d6c186e151022e20 ]--- The following steps explain how we can end up in this situation: 1) Task A is at check_system_chunk(), either because it is allocating a new data or metadata block group, at btrfs_chunk_alloc(), or because it is removing a block group or turning a block group RO. It does not matter why; 2) Task A sees that there is not enough free space in the system space_info object, that is 'left' is < 'thresh'. And at this point the system space_info has a value of 0 for its 'bytes_may_use' counter; 3) As a consequence task A calls btrfs_alloc_chunk() in order to allocate a new system block group (chunk) and then reserves 'thresh' bytes in the chunk block reserve with the call to btrfs_block_rsv_add(). This changes the chunk block reserve's 'reserved' and 'size' counters by an amount of 'thresh', and changes the 'bytes_may_use' counter of the system space_info object from 0 to 'thresh'. Also during its call to btrfs_alloc_chunk(), we end up increasing the value of the 'total_bytes' counter of the system space_info object by 8MiB (the size of a system chunk stripe). This happens through the call chain: btrfs_alloc_chunk() create_chunk() btrfs_make_block_group() btrfs_update_space_info() 4) After it finishes the first phase of the block group allocation, at btrfs_chunk_alloc(), task A unlocks the chunk mutex; 5) At this point the new system block group was added to the transaction handle's list of new block groups, but its block group item, device items and chunk item were not yet inserted in the extent, device and chunk trees, respectively. That only happens later when we call btrfs_finish_chunk_alloc() through a call to btrfs_create_pending_block_groups(); Note that only when we update the chunk tree, through the call to btrfs_finish_chunk_alloc(), we decrement the 'reserved' counter of the chunk block reserve as we COW/allocate extent buffers, through: btrfs_alloc_tree_block() btrfs_use_block_rsv() btrfs_block_rsv_use_bytes() And the system space_info's 'bytes_may_use' is decremented everytime we allocate an extent buffer for COW operations on the chunk tree, through: btrfs_alloc_tree_block() btrfs_reserve_extent() find_free_extent() btrfs_add_reserved_bytes() If we end up COWing less chunk btree nodes/leaves than expected, which is the typical case since the amount of space we reserve is always pessimistic to account for the worst possible case, we release the unused space through: btrfs_create_pending_block_groups() btrfs_trans_release_chunk_metadata() btrfs_block_rsv_release() block_rsv_release_bytes() btrfs_space_info_free_bytes_may_use() But before task A gets into btrfs_create_pending_block_groups()... 6) Many other tasks start allocating new block groups through fallocate, each one does the first phase of block group allocation in a serialized way, since btrfs_chunk_alloc() takes the chunk mutex before calling check_system_chunk() and btrfs_alloc_chunk(). However before everyone enters the final phase of the block group allocation, that is, before calling btrfs_create_pending_block_groups(), new tasks keep coming to allocate new block groups and while at check_system_chunk(), the system space_info's 'bytes_may_use' keeps increasing each time a task reserves space in the chunk block reserve. This means that eventually some other task can end up not seeing enough free space in the system space_info and decide to allocate yet another system chunk. This may repeat several times if yet more new tasks keep allocating new block groups before task A, and all the other tasks, finish the creation of the pending block groups, which is when reserved space in excess is released. Eventually this can result in exhaustion of system chunk array in the superblock, with btrfs_add_system_chunk() returning EFBIG, resulting later in a transaction abort. Even when we don't reach the extreme case of exhausting the system array, most, if not all, unnecessarily created system block groups end up being unused since when finishing creation of the first pending system block group, the creation of the following ones end up not needing to COW nodes/leaves of the chunk tree, so we never allocate and deallocate from them, resulting in them never being added to the list of unused block groups - as a consequence they don't get deleted by the cleaner kthread - the only exceptions are if we unmount and mount the filesystem again, which adds any unused block groups to the list of unused block groups, if a scrub is run, which also adds unused block groups to the unused list, and under some circumstances when using a zoned filesystem or async discard, which may also add unused block groups to the unused list. So fix this by: *) Tracking the number of reserved bytes for the chunk tree per transaction, which is the sum of reserved chunk bytes by each transaction handle currently being used; *) When there is not enough free space in the system space_info, if there are other transaction handles which reserved chunk space, wait for some of them to complete in order to have enough excess reserved space released, and then try again. Otherwise proceed with the creation of a new system chunk. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a2b2cc6 ] This patch fixes the following Coverity warning: CID 361199 (#1 of 1): Unchecked return value (CHECKED_RETURN) 3. check_return: Calling qla24xx_get_isp_stats without checking return value (as is done elsewhere 4 out of 5 times). Link: https://lore.kernel.org/r/20210320232359.941-7-bvanassche@acm.org Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Lee Duncan <lduncan@suse.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2ce35c0 ] On bsg command completion, bsg_job_done() was called while qla driver continued to access the bsg_job buffer. bsg_job_done() would free up resources that ended up being reused by other task while the driver continued to access the buffers. As a result, driver was reading garbage data. localhost kernel: BUG: KASAN: use-after-free in sg_next+0x64/0x80 localhost kernel: Read of size 8 at addr ffff8883228a3330 by task swapper/26/0 localhost kernel: localhost kernel: CPU: 26 PID: 0 Comm: swapper/26 Kdump: loaded Tainted: G OE --------- - - 4.18.0-193.el8.x86_64+debug #1 localhost kernel: Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 08/12/2016 localhost kernel: Call Trace: localhost kernel: <IRQ> localhost kernel: dump_stack+0x9a/0xf0 localhost kernel: print_address_description.cold.3+0x9/0x23b localhost kernel: kasan_report.cold.4+0x65/0x95 localhost kernel: debug_dma_unmap_sg.part.12+0x10d/0x2d0 localhost kernel: qla2x00_bsg_sp_free+0xaf6/0x1010 [qla2xxx] Link: https://lore.kernel.org/r/20210329085229.4367-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d736102 ] Here is the system crash log: [ 1272.884438] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1272.884444] IP: [< (null)>] (null) [ 1272.884447] PGD 825b09067 PUD 8267c8067 PMD 0 [ 1272.884452] Oops: 0010 [#1] SMP [ 1272.884509] CPU: 13 PID: 3485 Comm: cat Kdump: loaded Tainted: G [ 1272.884515] task: ffff9a38dbd4d140 ti: ffff9a37cd3b8000 task.ti: ffff9a37cd3b8000 [ 1272.884517] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 1272.884520] RSP: 0018:ffff9a37cd3bbe68 EFLAGS: 00010203 [ 1272.884522] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000014d5f [ 1272.884524] RDX: fffffffffffffff4 RSI: 0000000000000001 RDI: ffff9a38aca4d200 [ 1272.884526] RBP: ffff9a37cd3bbed0 R08: ffff9a38dcd5f1a0 R09: ffff9a31ffc07300 [ 1272.884527] R10: ffff9a31ffc07300 R11: ffffffffaddd5e9d R12: ffff9a38b4e0fb00 [ 1272.884529] R13: 0000000000000001 R14: ffff9a37cd3bbf18 R15: ffff9a38aca4d200 [ 1272.884532] FS: 00007feccaa67740(0000) GS:ffff9a38dcd40000(0000) knlGS:0000000000000000 [ 1272.884534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1272.884536] CR2: 0000000000000000 CR3: 00000008267c0000 CR4: 00000000003407e0 [ 1272.884537] Call Trace: [ 1272.884544] [<ffffffffade68940>] ? seq_read+0x130/0x440 [ 1272.884548] [<ffffffffade40f8f>] vfs_read+0x9f/0x170 [ 1272.884552] [<ffffffffade41e4f>] SyS_read+0x7f/0xf0 [ 1272.884557] [<ffffffffae374ddb>] system_call_fastpath+0x22/0x27 [ 1272.884558] Code: Bad RIP value. [ 1272.884562] RIP [< (null)>] (null) [ 1272.884564] RSP <ffff9a37cd3bbe68> [ 1272.884566] CR2: 0000000000000000 Signed-off-by: Qu Huang <jinsdb@126.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…rallel [ Upstream commit b168e1d ] We got a warning message below. When server tries to close one session by force, it locks the sysfs interface and locks the srv_sess lock. The problem is that client can send a request to close at the same time. By close request, server locks the srv_sess lock and locks the sysfs to remove the sysfs interfaces. The simplest way to prevent that situation could be just use mutex_trylock. [ 234.153965] ====================================================== [ 234.154093] WARNING: possible circular locking dependency detected [ 234.154219] 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10 Tainted: G O [ 234.154381] ------------------------------------------------------ [ 234.154531] kworker/1:1H/618 is trying to acquire lock: [ 234.154651] ffff8887a09db0a8 (kn->count#132){++++}, at: kernfs_remove_by_name_ns+0x40/0x80 [ 234.154819] but task is already holding lock: [ 234.154965] ffff8887ae5f6518 (&srv_sess->lock){+.+.}, at: rnbd_srv_rdma_ev+0x144/0x1590 [rnbd_server] [ 234.155132] which lock already depends on the new lock. [ 234.155311] the existing dependency chain (in reverse order) is: [ 234.155462] -> #1 (&srv_sess->lock){+.+.}: [ 234.155614] __mutex_lock+0x134/0xcb0 [ 234.155761] rnbd_srv_sess_dev_force_close+0x36/0x50 [rnbd_server] [ 234.155889] rnbd_srv_dev_session_force_close_store+0x69/0xc0 [rnbd_server] [ 234.156042] kernfs_fop_write+0x13f/0x240 [ 234.156162] vfs_write+0xf3/0x280 [ 234.156278] ksys_write+0xba/0x150 [ 234.156395] do_syscall_64+0x62/0x270 [ 234.156513] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 234.156632] -> #0 (kn->count#132){++++}: [ 234.156782] __lock_acquire+0x129e/0x23a0 [ 234.156900] lock_acquire+0xf3/0x210 [ 234.157043] __kernfs_remove+0x42b/0x4c0 [ 234.157161] kernfs_remove_by_name_ns+0x40/0x80 [ 234.157282] remove_files+0x3f/0xa0 [ 234.157399] sysfs_remove_group+0x4a/0xb0 [ 234.157519] rnbd_srv_destroy_dev_session_sysfs+0x19/0x30 [rnbd_server] [ 234.157648] rnbd_srv_rdma_ev+0x14c/0x1590 [rnbd_server] [ 234.157775] process_io_req+0x29a/0x6a0 [rtrs_server] [ 234.157924] __ib_process_cq+0x8c/0x100 [ib_core] [ 234.158709] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 234.158834] process_one_work+0x4e5/0xaa0 [ 234.158958] worker_thread+0x65/0x5c0 [ 234.159078] kthread+0x1e0/0x200 [ 234.159194] ret_from_fork+0x24/0x30 [ 234.159309] other info that might help us debug this: [ 234.159513] Possible unsafe locking scenario: [ 234.159658] CPU0 CPU1 [ 234.159775] ---- ---- [ 234.159891] lock(&srv_sess->lock); [ 234.160005] lock(kn->count#132); [ 234.160128] lock(&srv_sess->lock); [ 234.160250] lock(kn->count#132); [ 234.160364] *** DEADLOCK *** [ 234.160536] 3 locks held by kworker/1:1H/618: [ 234.160677] #0: ffff8883ca1ed528 ((wq_completion)ib-comp-wq){+.+.}, at: process_one_work+0x40a/0xaa0 [ 234.160840] #1: ffff8883d2d5fe10 ((work_completion)(&cq->work)){+.+.}, at: process_one_work+0x40a/0xaa0 [ 234.161003] #2: ffff8887ae5f6518 (&srv_sess->lock){+.+.}, at: rnbd_srv_rdma_ev+0x144/0x1590 [rnbd_server] [ 234.161168] stack backtrace: [ 234.161312] CPU: 1 PID: 618 Comm: kworker/1:1H Tainted: G O 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10 [ 234.161490] Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012 [ 234.161643] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [ 234.161765] Call Trace: [ 234.161910] dump_stack+0x96/0xe0 [ 234.162028] check_noncircular+0x29e/0x2e0 [ 234.162148] ? print_circular_bug+0x100/0x100 [ 234.162267] ? register_lock_class+0x1ad/0x8a0 [ 234.162385] ? __lock_acquire+0x68e/0x23a0 [ 234.162505] ? trace_event_raw_event_lock+0x190/0x190 [ 234.162626] __lock_acquire+0x129e/0x23a0 [ 234.162746] ? register_lock_class+0x8a0/0x8a0 [ 234.162866] lock_acquire+0xf3/0x210 [ 234.162982] ? kernfs_remove_by_name_ns+0x40/0x80 [ 234.163127] __kernfs_remove+0x42b/0x4c0 [ 234.163243] ? kernfs_remove_by_name_ns+0x40/0x80 [ 234.163363] ? kernfs_fop_readdir+0x3b0/0x3b0 [ 234.163482] ? strlen+0x1f/0x40 [ 234.163596] ? strcmp+0x30/0x50 [ 234.163712] kernfs_remove_by_name_ns+0x40/0x80 [ 234.163832] remove_files+0x3f/0xa0 [ 234.163948] sysfs_remove_group+0x4a/0xb0 [ 234.164068] rnbd_srv_destroy_dev_session_sysfs+0x19/0x30 [rnbd_server] [ 234.164196] rnbd_srv_rdma_ev+0x14c/0x1590 [rnbd_server] [ 234.164345] ? _raw_spin_unlock_irqrestore+0x43/0x50 [ 234.164466] ? lockdep_hardirqs_on+0x1a8/0x290 [ 234.164597] ? mlx4_ib_poll_cq+0x927/0x1280 [mlx4_ib] [ 234.164732] ? rnbd_get_sess_dev+0x270/0x270 [rnbd_server] [ 234.164859] process_io_req+0x29a/0x6a0 [rtrs_server] [ 234.164982] ? rnbd_get_sess_dev+0x270/0x270 [rnbd_server] [ 234.165130] __ib_process_cq+0x8c/0x100 [ib_core] [ 234.165279] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 234.165404] process_one_work+0x4e5/0xaa0 [ 234.165550] ? pwq_dec_nr_in_flight+0x160/0x160 [ 234.165675] ? do_raw_spin_lock+0x119/0x1d0 [ 234.165796] worker_thread+0x65/0x5c0 [ 234.165914] ? process_one_work+0xaa0/0xaa0 [ 234.166031] kthread+0x1e0/0x200 [ 234.166147] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 234.166268] ret_from_fork+0x24/0x30 [ 234.251591] rnbd_server L243: </dev/loop1@close_device_session>: Device closed [ 234.604221] rnbd_server L264: RTRS Session close_device_session disconnected Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-10-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

… root [ Upstream commit f9690f4 ] Commit dbcc7d5 ("btrfs: fix race when cloning extent buffer during rewind of an old root"), fixed a race when we need to rewind the extent buffer of an old root. It was caused by picking a new mod log operation for the extent buffer while getting a cloned extent buffer with an outdated number of items (off by -1), because we cloned the extent buffer without locking it first. However there is still another similar race, but in the opposite direction. The cloned extent buffer has a number of items that does not match the number of tree mod log operations that are going to be replayed. This is because right after we got the last (most recent) tree mod log operation to replay and before locking and cloning the extent buffer, another task adds a new pointer to the extent buffer, which results in adding a new tree mod log operation and incrementing the number of items in the extent buffer. So after cloning we have mismatch between the number of items in the extent buffer and the number of mod log operations we are going to apply to it. This results in hitting a BUG_ON() that produces the following stack trace: ------------[ cut here ]------------ kernel BUG at fs/btrfs/tree-mod-log.c:675! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 3 PID: 4811 Comm: crawl_1215 Tainted: G W 5.12.0-7d1efdf501f8-misc-next+ #99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:tree_mod_log_rewind+0x3b1/0x3c0 Code: 05 48 8d 74 10 (...) RSP: 0018:ffffc90001027090 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8880a8514600 RCX: ffffffffaa9e59b6 RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8880a851462c RBP: ffffc900010270e0 R08: 00000000000000c0 R09: ffffed1004333417 R10: ffff88802199a0b7 R11: ffffed1004333416 R12: 000000000000000e R13: ffff888135af8748 R14: ffff88818766ff00 R15: ffff8880a851462c FS: 00007f29acf62700(0000) GS:ffff8881f2200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0e6013f718 CR3: 000000010d42e003 CR4: 0000000000170ee0 Call Trace: btrfs_get_old_root+0x16a/0x5c0 ? lock_downgrade+0x400/0x400 btrfs_search_old_slot+0x192/0x520 ? btrfs_search_slot+0x1090/0x1090 ? free_extent_buffer.part.61+0xd7/0x140 ? free_extent_buffer+0x13/0x20 resolve_indirect_refs+0x3e9/0xfc0 ? lock_downgrade+0x400/0x400 ? __kasan_check_read+0x11/0x20 ? add_prelim_ref.part.11+0x150/0x150 ? lock_downgrade+0x400/0x400 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x620 ? __kasan_check_write+0x14/0x20 ? do_raw_spin_unlock+0xa8/0x140 ? rb_insert_color+0x340/0x360 ? prelim_ref_insert+0x12d/0x430 find_parent_nodes+0x5c3/0x1830 ? stack_trace_save+0x87/0xb0 ? resolve_indirect_refs+0xfc0/0xfc0 ? fs_reclaim_acquire+0x67/0xf0 ? __kasan_check_read+0x11/0x20 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? fs_reclaim_acquire+0x67/0xf0 ? __kasan_check_read+0x11/0x20 ? ___might_sleep+0x10f/0x1e0 ? __kasan_kmalloc+0x9d/0xd0 ? trace_hardirqs_on+0x55/0x120 btrfs_find_all_roots_safe+0x142/0x1e0 ? find_parent_nodes+0x1830/0x1830 ? trace_hardirqs_on+0x55/0x120 ? ulist_free+0x1f/0x30 ? btrfs_inode_flags_to_xflags+0x50/0x50 iterate_extent_inodes+0x20e/0x580 ? tree_backref_for_extent+0x230/0x230 ? release_extent_buffer+0x225/0x280 ? read_extent_buffer+0xdd/0x110 ? lock_downgrade+0x400/0x400 ? __kasan_check_read+0x11/0x20 ? lock_acquired+0xbb/0x620 ? __kasan_check_write+0x14/0x20 ? do_raw_spin_unlock+0xa8/0x140 ? _raw_spin_unlock+0x22/0x30 ? release_extent_buffer+0x225/0x280 iterate_inodes_from_logical+0x129/0x170 ? iterate_inodes_from_logical+0x129/0x170 ? btrfs_inode_flags_to_xflags+0x50/0x50 ? iterate_extent_inodes+0x580/0x580 ? __vmalloc_node+0x92/0xb0 ? init_data_container+0x34/0xb0 ? init_data_container+0x34/0xb0 ? kvmalloc_node+0x60/0x80 btrfs_ioctl_logical_to_ino+0x158/0x230 btrfs_ioctl+0x2038/0x4360 ? __kasan_check_write+0x14/0x20 ? mmput+0x3b/0x220 ? btrfs_ioctl_get_supported_features+0x30/0x30 ? __kasan_check_read+0x11/0x20 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x650 ? __might_fault+0x64/0xd0 ? __kasan_check_read+0x11/0x20 ? lock_downgrade+0x400/0x400 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? lockdep_hardirqs_on_prepare+0x13/0x210 ? _raw_spin_unlock_irqrestore+0x51/0x63 ? __kasan_check_read+0x11/0x20 ? do_vfs_ioctl+0xfc/0x9d0 ? ioctl_file_clone+0xe0/0xe0 ? lock_downgrade+0x400/0x400 ? lockdep_hardirqs_on_prepare+0x210/0x210 ? __kasan_check_read+0x11/0x20 ? lock_release+0xc8/0x650 ? __task_pid_nr_ns+0xd3/0x250 ? __kasan_check_read+0x11/0x20 ? __fget_files+0x160/0x230 ? __fget_light+0xf2/0x110 __x64_sys_ioctl+0xc3/0x100 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f29ae85b427 Code: 00 00 90 48 8b (...) RSP: 002b:00007f29acf5fcf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f29acf5ff40 RCX: 00007f29ae85b427 RDX: 00007f29acf5ff48 RSI: 00000000c038943b RDI: 0000000000000003 RBP: 0000000001000000 R08: 0000000000000000 R09: 00007f29acf60120 R10: 00005640d5fc7b00 R11: 0000000000000246 R12: 0000000000000003 R13: 00007f29acf5ff48 R14: 00007f29acf5ff40 R15: 00007f29acf5fef8 Modules linked in: ---[ end trace 85e5fce078dfbe04 ]--- (gdb) l *(tree_mod_log_rewind+0x3b1) 0xffffffff819e5b21 is in tree_mod_log_rewind (fs/btrfs/tree-mod-log.c:675). 670 * the modification. As we're going backwards, we do the 671 * opposite of each operation here. 672 */ 673 switch (tm->op) { 674 case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING: 675 BUG_ON(tm->slot < n); 676 fallthrough; 677 case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_MOVING: 678 case BTRFS_MOD_LOG_KEY_REMOVE: 679 btrfs_set_node_key(eb, &tm->key, tm->slot); (gdb) quit The following steps explain in more detail how it happens: 1) We have one tree mod log user (through fiemap or the logical ino ioctl), with a sequence number of 1, so we have fs_info->tree_mod_seq == 1. This is task A; 2) Another task is at ctree.c:balance_level() and we have eb X currently as the root of the tree, and we promote its single child, eb Y, as the new root. Then, at ctree.c:balance_level(), we call: ret = btrfs_tree_mod_log_insert_root(root->node, child, true); 3) At btrfs_tree_mod_log_insert_root() we create a tree mod log operation of type BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING, with a ->logical field pointing to ebX->start. We only have one item in eb X, so we create only one tree mod log operation, and store in the "tm_list" array; 4) Then, still at btrfs_tree_mod_log_insert_root(), we create a tree mod log element of operation type BTRFS_MOD_LOG_ROOT_REPLACE, ->logical set to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set to the level of eb X and ->generation set to the generation of eb X; 5) Then btrfs_tree_mod_log_insert_root() calls tree_mod_log_free_eb() with "tm_list" as argument. After that, tree_mod_log_free_eb() calls tree_mod_log_insert(). This inserts the mod log operation of type BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING from step 3 into the rbtree with a sequence number of 2 (and fs_info->tree_mod_seq set to 2); 6) Then, after inserting the "tm_list" single element into the tree mod log rbtree, the BTRFS_MOD_LOG_ROOT_REPLACE element is inserted, which gets the sequence number 3 (and fs_info->tree_mod_seq set to 3); 7) Back to ctree.c:balance_level(), we free eb X by calling btrfs_free_tree_block() on it. Because eb X was created in the current transaction, has no other references and writeback did not happen for it, we add it back to the free space cache/tree; 8) Later some other task B allocates the metadata extent from eb X, since it is marked as free space in the space cache/tree, and uses it as a node for some other btree; 9) The tree mod log user task calls btrfs_search_old_slot(), which calls btrfs_get_old_root(), and finally that calls tree_mod_log_oldest_root() with time_seq == 1 and eb_root == eb Y; 10) The first iteration of the while loop finds the tree mod log element with sequence number 3, for the logical address of eb Y and of type BTRFS_MOD_LOG_ROOT_REPLACE; 11) Because the operation type is BTRFS_MOD_LOG_ROOT_REPLACE, we don't break out of the loop, and set root_logical to point to tm->old_root.logical, which corresponds to the logical address of eb X; 12) On the next iteration of the while loop, the call to tree_mod_log_search_oldest() returns the smallest tree mod log element for the logical address of eb X, which has a sequence number of 2, an operation type of BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to the old slot 0 of eb X (eb X had only 1 item in it before being freed at step 7); 13) We then break out of the while loop and return the tree mod log operation of type BTRFS_MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot 0 of eb X, to btrfs_get_old_root(); 14) At btrfs_get_old_root(), we process the BTRFS_MOD_LOG_ROOT_REPLACE operation and set "logical" to the logical address of eb X, which was the old root. We then call tree_mod_log_search() passing it the logical address of eb X and time_seq == 1; 15) But before calling tree_mod_log_search(), task B locks eb X, adds a key to eb X, which results in adding a tree mod log operation of type BTRFS_MOD_LOG_KEY_ADD, with a sequence number of 4, to the tree mod log, and increments the number of items in eb X from 0 to 1. Now fs_info->tree_mod_seq has a value of 4; 16) Task A then calls tree_mod_log_search(), which returns the most recent tree mod log operation for eb X, which is the one just added by task B at the previous step, with a sequence number of 4, a type of BTRFS_MOD_LOG_KEY_ADD and for slot 0; 17) Before task A locks and clones eb X, task A adds another key to eb X, which results in adding a new BTRFS_MOD_LOG_KEY_ADD mod log operation, with a sequence number of 5, for slot 1 of eb X, increments the number of items in eb X from 1 to 2, and unlocks eb X. Now fs_info->tree_mod_seq has a value of 5; 18) Task A then locks eb X and clones it. The clone has a value of 2 for the number of items and the pointer "tm" points to the tree mod log operation with sequence number 4, not the most recent one with a sequence number of 5, so there is mismatch between the number of mod log operations that are going to be applied to the cloned version of eb X and the number of items in the clone; 19) Task A then calls tree_mod_log_rewind() with the clone of eb X, the tree mod log operation with sequence number 4 and a type of BTRFS_MOD_LOG_KEY_ADD, and time_seq == 1; 20) At tree_mod_log_rewind(), we set the local variable "n" with a value of 2, which is the number of items in the clone of eb X. Then in the first iteration of the while loop, we process the mod log operation with sequence number 4, which is targeted at slot 0 and has a type of BTRFS_MOD_LOG_KEY_ADD. This results in decrementing "n" from 2 to 1. Then we pick the next tree mod log operation for eb X, which is the tree mod log operation with a sequence number of 2, a type of BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and for slot 0, it is the one added in step 5 to the tree mod log tree. We go back to the top of the loop to process this mod log operation, and because its slot is 0 and "n" has a value of 1, we hit the BUG_ON: (...) switch (tm->op) { case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING: BUG_ON(tm->slot < n); fallthrough; (...) Fix this by checking for a more recent tree mod log operation after locking and cloning the extent buffer of the old root node, and use it as the first operation to apply to the cloned extent buffer when rewinding it. Stable backport notes: due to moved code and renames, in =< 5.11 the change should be applied to ctree.c:get_old_root. Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/20210404040732.GZ32440@hungrycats.org/ Fixes: 834328a ("Btrfs: tree mod log's old roots could still be part of the tree") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit b1ebaa0 upstream. The execution of sys_read end up hitting a BUG_ON() in __find_get_block after installing kprobe at sys_read, the BUG message like the following: [ 65.708663] ------------[ cut here ]------------ [ 65.709987] kernel BUG at fs/buffer.c:1251! [ 65.711283] Kernel BUG [#1] [ 65.712032] Modules linked in: [ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1 [ 65.714407] Hardware name: riscv-virtio,qemu (DT) [ 65.715696] epc : __find_get_block+0x218/0x2c8 [ 65.716835] ra : __getblk_gfp+0x1c/0x4a [ 65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930 [ 65.719553] gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038 [ 65.721290] t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960 [ 65.723051] s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a [ 65.724772] a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040 [ 65.726545] a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000 [ 65.728308] s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008 [ 65.730049] s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8 [ 65.731802] s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008 [ 65.733516] s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f [ 65.734434] t5 : 00000000000003ff t6 : 0000000000040000 [ 65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 65.734901] Call Trace: [ 65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8 [ 65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6 [ 65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a [ 65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c [ 65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e [ 65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66 [ 65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da [ 65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150 [ 65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246 [ 65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114 [ 65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea [ 65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a [ 65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2 [ 65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8 [ 65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16 [ 65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2 [ 65.738858] ---[ end trace fe93f985456c935d ]--- A simple reproducer looks like: echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable cat /sys/kernel/debug/tracing/trace Here's what happens to hit that BUG_ON(): 1) After installing kprobe at entry of sys_read, the first instruction is replaced by 'ebreak' instruction on riscv64 platform. 2) Once kernel reach the 'ebreak' instruction at the entry of sys_read, it trap into the riscv breakpoint handler, where it do something to setup for coming single-step of origin instruction, including backup the 'sstatus' in pt_regs, followed by disable interrupt during single stepping via clear 'SIE' bit of 'sstatus' in pt_regs. 3) Then kernel restore to the instruction slot contains two instructions, one is original instruction at entry of sys_read, the other is 'ebreak'. Here it trigger a 'Instruction page fault' exception (value at 'scause' is '0xc'), if PF is not filled into PageTabe for that slot yet. 4) Again kernel trap into page fault exception handler, where it choose different policy according to the state of running kprobe. Because afte 2) the state is KPROBE_HIT_SS, so kernel reset the current kprobe and 'pc' points back to the probe address. 5) Because 'epc' point back to 'ebreak' instrution at sys_read probe, kernel trap into breakpoint handler again, and repeat the operations at 2), however 'sstatus' without 'SIE' is keep at 4), it cause the real 'sstatus' saved at 2) is overwritten by the one withou 'SIE'. 6) When kernel cross the probe the 'sstatus' CSR restore with value without 'SIE', and reach __find_get_block where it requires the interrupt must be enabled. Fix this is very trivial, just restore the value of 'sstatus' in pt_regs with backup one at 2) when the instruction being single stepped cause a page fault. Fixes: c22b0bc ("riscv: Add kprobes supported") Signed-off-by: Liao Chang <liaochang1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 44200f2 upstream. Debian's clang carries a patch that makes the default FPU mode 'vfp3-d16' instead of 'neon' for 'armv7-a' to avoid generating NEON instructions on hardware that does not support them: https://salsa.debian.org/pkg-llvm-team/llvm-toolchain/-/raw/5a61ca6f21b4ad8c6ac4970e5ea5a7b5b4486d22/debian/patches/clang-arm-default-vfp3-on-armv7a.patch https://bugs.debian.org/841474 https://bugs.debian.org/842142 https://bugs.debian.org/914268 This results in the following build error when clang's integrated assembler is used because the '.arch' directive overrides the '.fpu' directive: arch/arm/crypto/curve25519-core.S:25:2: error: instruction requires: NEON vmov.i32 q0, #1 ^ arch/arm/crypto/curve25519-core.S:26:2: error: instruction requires: NEON vshr.u64 q1, q0, #7 ^ arch/arm/crypto/curve25519-core.S:27:2: error: instruction requires: NEON vshr.u64 q0, q0, #8 ^ arch/arm/crypto/curve25519-core.S:28:2: error: instruction requires: NEON vmov.i32 d4, #19 ^ Shuffle the order of the '.arch' and '.fpu' directives so that the code builds regardless of the default FPU mode. This has been tested against both clang with and without Debian's patch and GCC. Cc: stable@vger.kernel.org Fixes: d8f1308 ("crypto: arm/curve25519 - wire up NEON implementation") Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/118 Reported-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Jessica Clarke <jrtc27@jrtc27.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ed queues commit 99ba0ea upstream. efx->xdp_tx_queue_count is initially initialized to num_possible_cpus() and is later used to allocate and traverse efx->xdp_tx_queues lookup array. However, we may end up not initializing all the array slots with real queues during probing. This results, for example, in a NULL pointer dereference, when running "# ethtool -S <iface>", similar to below [2570283.664955][T4126959] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [2570283.681283][T4126959] #PF: supervisor read access in kernel mode [2570283.695678][T4126959] #PF: error_code(0x0000) - not-present page [2570283.710013][T4126959] PGD 0 P4D 0 [2570283.721649][T4126959] Oops: 0000 [#1] SMP PTI [2570283.734108][T4126959] CPU: 23 PID: 4126959 Comm: ethtool Tainted: G O 5.10.20-cloudflare-2021.3.1 #1 [2570283.752641][T4126959] Hardware name: <redacted> [2570283.781408][T4126959] RIP: 0010:efx_ethtool_get_stats+0x2ca/0x330 [sfc] [2570283.796073][T4126959] Code: 00 85 c0 74 39 48 8b 95 a8 0f 00 00 48 85 d2 74 2d 31 c0 eb 07 48 8b 95 a8 0f 00 00 48 63 c8 49 83 c4 08 83 c0 01 48 8b 14 ca <48> 8b 92 f8 00 00 00 49 89 54 24 f8 39 85 a0 0f 00 00 77 d7 48 8b [2570283.831259][T4126959] RSP: 0018:ffffb79a77657ce8 EFLAGS: 00010202 [2570283.845121][T4126959] RAX: 0000000000000019 RBX: ffffb799cd0c9280 RCX: 0000000000000018 [2570283.860872][T4126959] RDX: 0000000000000000 RSI: ffff96dd970ce000 RDI: 0000000000000005 [2570283.876525][T4126959] RBP: ffff96dd86f0a000 R08: ffff96dd970ce480 R09: 000000000000005f [2570283.892014][T4126959] R10: ffffb799cd0c9fff R11: ffffb799cd0c9000 R12: ffffb799cd0c94f8 [2570283.907406][T4126959] R13: ffffffffc11b1090 R14: ffff96dd970ce000 R15: ffffffffc11cd66c [2570283.922705][T4126959] FS: 00007fa7723f8740(0000) GS:ffff96f51fac0000(0000) knlGS:0000000000000000 [2570283.938848][T4126959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2570283.952524][T4126959] CR2: 00000000000000f8 CR3: 0000001a73e6e006 CR4: 00000000007706e0 [2570283.967529][T4126959] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [2570283.982400][T4126959] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [2570283.997308][T4126959] PKRU: 55555554 [2570284.007649][T4126959] Call Trace: [2570284.017598][T4126959] dev_ethtool+0x1832/0x2830 Fix this by adjusting efx->xdp_tx_queue_count after probing to reflect the true value of initialized slots in efx->xdp_tx_queues. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Fixes: e26ca4b ("sfc: reduce the number of requested xdp ev queues") Cc: <stable@vger.kernel.org> # 5.12.x Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad91849 upstream. If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP Cc: stable@vger.kernel.org Fixes: 6d5f26f ("media: staging/intel-ipu3-v4l: reduce kernel stack usage") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ad fails commit 8e947c8 upstream. When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device(). Cc: <stable@vger.kernel.org> # 4.6+ Fixes: 1c357a1 ("dm: allocate blk_mq_tag_set rather than embed in mapped_device") Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7c7a2f upstream. md_kick_rdev_from_array will remove rdev, so we should use rdev_for_each_safe to search list. How to trigger: env: Two nodes on kvm-qemu x86_64 VMs (2C2G with 2 iscsi luns). ``` node2=192.168.0.3 for i in {1..20}; do echo ==== $i `date` ====; mdadm -Ss && ssh ${node2} "mdadm -Ss" wipefs -a /dev/sda /dev/sdb mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l 1 /dev/sda \ /dev/sdb --assume-clean ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb" mdadm --wait /dev/md0 ssh ${node2} "mdadm --wait /dev/md0" mdadm --manage /dev/md0 --fail /dev/sda --remove /dev/sda sleep 1 done ``` Crash stack: ``` stack segment: 0000 [#1] SMP ... ... RIP: 0010:md_check_recovery+0x1e8/0x570 [md_mod] ... ... RSP: 0018:ffffb149807a7d68 EFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9d494c180800 RCX: ffff9d490fc01e50 RDX: fffff047c0ed8308 RSI: 0000000000000246 RDI: 0000000000000246 RBP: 6b6b6b6b6b6b6b6b R08: ffff9d490fc01e40 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d494c180818 R14: ffff9d493399ef38 R15: ffff9d4933a1d800 FS: 0000000000000000(0000) GS:ffff9d494f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe68cab9010 CR3: 000000004c6be001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: raid1d+0x5c/0xd40 [raid1] ? finish_task_switch+0x75/0x2a0 ? lock_timer_base+0x67/0x80 ? try_to_del_timer_sync+0x4d/0x80 ? del_timer_sync+0x41/0x50 ? schedule_timeout+0x254/0x2d0 ? md_start_sync+0xe0/0xe0 [md_mod] ? md_thread+0x127/0x160 [md_mod] md_thread+0x127/0x160 [md_mod] ? wait_woken+0x80/0x80 kthread+0x10d/0x130 ? kthread_park+0xa0/0xa0 ret_from_fork+0x1f/0x40 ``` Fixes: dbb64f8 ("md-cluster: Fix adding of new disk with new reload code") Fixes: 659b254 ("md-cluster: remove a disk asynchronously from cluster environment") Cc: stable@vger.kernel.org Reviewed-by: Gang He <ghe@suse.com> Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…aster_register" commit 0d95f41 upstream. Adding the destroy_workqueue call in i3c_master_register introduced below kernel warning because it makes duplicate destroy_workqueue calls when i3c_master_register fails after allocating the workqueue. The workqueue will be destroyed by i3c_masterdev_release which is called by put_device at the end of the i3c_master_register function eventually in failure cases so the workqueue doesn't need to be destroyed in i3c_master_register. [ 6.972952] WARNING: CPU: 1 PID: 1 at lib/list_debug.c:48 __list_del_entry_valid+0x9c/0xf4 [ 6.982205] list_del corruption, 8fe03c08->prev is LIST_POISON2 (00000122) [ 6.989910] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.10.23-c12838a-dirty-31dc772 #1 [ 7.000295] Hardware name: Generic DT based system [ 7.005638] Backtrace: [ 7.008369] [<809133f0>] (dump_backtrace) from [<80913644>] (show_stack+0x20/0x24) [ 7.016819] r7:00000030 r6:60000013 r5:00000000 r4:813b5d40 [ 7.023137] [<80913624>] (show_stack) from [<8091e1a0>] (dump_stack+0x9c/0xb0) [ 7.031201] [<8091e104>] (dump_stack) from [<8011fa30>] (__warn+0xf8/0x154) [ 7.038972] r7:00000030 r6:00000009 r5:804fa1c8 r4:80b6eca4 [ 7.045289] [<8011f938>] (__warn) from [<80913d14>] (warn_slowpath_fmt+0x8c/0xc0) [ 7.053641] r7:00000030 r6:80b6eca4 r5:80b6ed74 r4:818cc000 [ 7.059960] [<80913c8c>] (warn_slowpath_fmt) from [<804fa1c8>] (__list_del_entry_valid+0x9c/0xf4) [ 7.069866] r9:96becf8c r8:818cc000 r7:8fe03c10 r6:8fe03c00 r5:8fe03ba0 r4:ff7ead4c [ 7.078513] [<804fa12c>] (__list_del_entry_valid) from [<8013f0b4>] (destroy_workqueue+0x1c4/0x23c) [ 7.088615] [<8013eef0>] (destroy_workqueue) from [<806aa124>] (i3c_masterdev_release+0x40/0xb0) [ 7.098421] r7:00000000 r6:81a43b80 r5:8fe65360 r4:8fe65048 [ 7.104740] [<806aa0e4>] (i3c_masterdev_release) from [<805f3f04>] (device_release+0x40/0xb0) [ 7.114254] r5:00000000 r4:8fe65048 [ 7.118245] [<805f3ec4>] (device_release) from [<808fe754>] (kobject_put+0xc8/0x204) [ 7.126885] r5:813978dc r4:8fe65048 [ 7.130877] [<808fe68c>] (kobject_put) from [<805f5fbc>] (put_device+0x20/0x24) [ 7.139037] r7:8fe65358 r6:8fe65368 r5:8fe65358 r4:8fe65048 [ 7.145355] [<805f5f9c>] (put_device) from [<806abac4>] (i3c_master_register+0x338/0xb00) [ 7.154487] [<806ab78c>] (i3c_master_register) from [<806ae084>] (dw_i3c_probe+0x224/0x24c) [ 7.163811] r10:00000000 r9:8fe7a100 r8:00000032 r7:819fa810 r6:819fa800 r5:8fe65040 [ 7.172547] r4:00000000 [ 7.175376] [<806ade60>] (dw_i3c_probe) from [<805fdc14>] (platform_drv_probe+0x44/0x80) [ 7.184409] r9:813a25c0 r8:00000000 r7:815ec114 r6:00000000 r5:813a25c0 r4:819fa810 [ 7.193053] [<805fdbd0>] (platform_drv_probe) from [<805fb83c>] (really_probe+0x108/0x50c) [ 7.202275] r5:815ec004 r4:819fa810 [ 7.206265] [<805fb734>] (really_probe) from [<805fc180>] (driver_probe_device+0xb4/0x190) [ 7.215492] r10:813dc000 r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa810 r5:00000000 [ 7.224228] r4:813a25c0 [ 7.227055] [<805fc0cc>] (driver_probe_device) from [<805fc5cc>] (device_driver_attach+0xb8/0xc0) [ 7.236959] r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa854 r4:819fa810 [ 7.244439] [<805fc514>] (device_driver_attach) from [<805fc65c>] (__driver_attach+0x88/0x16c) [ 7.254051] r7:00000000 r6:819fa810 r5:00000000 r4:813a25c0 [ 7.260369] [<805fc5d4>] (__driver_attach) from [<805f954c>] (bus_for_each_dev+0x88/0xc8) [ 7.269489] r7:00000000 r6:818cc000 r5:805fc5d4 r4:813a25c0 [ 7.275806] [<805f94c4>] (bus_for_each_dev) from [<805fc76c>] (driver_attach+0x2c/0x30) [ 7.284739] r7:81397c98 r6:00000000 r5:8fe7db80 r4:813a25c0 [ 7.291057] [<805fc740>] (driver_attach) from [<805f9eec>] (bus_add_driver+0x120/0x200) [ 7.299984] [<805f9dcc>] (bus_add_driver) from [<805fce44>] (driver_register+0x98/0x128) [ 7.309005] r7:80c4383c r6:00000000 r5:00000000 r4:813a25c0 [ 7.315323] [<805fcdac>] (driver_register) from [<805fedb4>] (__platform_driver_register+0x50/0x58) [ 7.325410] r5:818cc000 r4:81397c98 [ 7.329404] [<805fed64>] (__platform_driver_register) from [<80c23398>] (dw_i3c_driver_init+0x24/0x28) [ 7.339790] r5:818cc000 r4:80c23374 [ 7.343784] [<80c23374>] (dw_i3c_driver_init) from [<80c01300>] (do_one_initcall+0xac/0x1d0) [ 7.353206] [<80c01254>] (do_one_initcall) from [<80c01630>] (kernel_init_freeable+0x1a8/0x204) [ 7.362916] r8:000000d9 r7:80c4383c r6:00000007 r5:819ca2c0 r4:80c67680 [ 7.370398] [<80c01488>] (kernel_init_freeable) from [<8091eb18>] (kernel_init+0x18/0x12c) [ 7.379616] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8091eb00 [ 7.388343] r4:00000000 [ 7.391170] [<8091eb00>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 7.399607] Exception stack(0x818cdfb0 to 0x818cdff8) [ 7.405243] dfa0: 00000000 00000000 00000000 00000000 [ 7.414371] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.423499] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 7.430879] r5:8091eb00 r4:00000000 This reverts commit 59165d1. Fixes: 59165d1 ("i3c master: fix missing destroy_workqueue() on error in i3c_master_register") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210408172803.24599-1-jae.hyun.yoo@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 126bdb6 ] The spi controller supports 44-bit address space on AXI in DMA mode, so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping. In addition, if dma_map_single fails, it should return immediately instead of continuing doing the DMA operation which bases on invalid address. This fixes the following crash which occurs in reading a big block from flash: [ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots) [ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped [ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0 [ 123.792536] Mem abort info: [ 123.795313] ESR = 0x96000145 [ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits [ 123.803655] SET = 0, FnV = 0 [ 123.806693] EA = 0, S1PTW = 0 [ 123.809818] Data abort info: [ 123.812683] ISV = 0, ISS = 0x00000145 [ 123.816503] CM = 1, WnR = 1 [ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000 [ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000 [ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP Fixes: 1c26372 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210416004652.2975446-6-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b5332a9 ] We are not changing anything in the TCP connection state so we should not take a write_lock but rather a read lock. This caused a deadlock when running nvmet-tcp and nvme-tcp on the same system, where state_change callbacks on the host and on the controller side have causal relationship and made lockdep report on this with blktests: ================================ WARNING: inconsistent lock state 5.12.0-rc3 #1 Tainted: G I -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage. nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x79b/0x18d0 lock_acquire+0x1ca/0x480 _raw_write_lock_bh+0x39/0x80 nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp] tcp_fin+0x2a8/0x780 tcp_data_queue+0xf94/0x1f20 tcp_rcv_established+0x6ba/0x1f00 tcp_v4_do_rcv+0x502/0x760 tcp_v4_rcv+0x257e/0x3430 ip_protocol_deliver_rcu+0x69/0x6a0 ip_local_deliver_finish+0x1e2/0x2f0 ip_local_deliver+0x1a2/0x420 ip_rcv+0x4fb/0x6b0 __netif_receive_skb_one_core+0x162/0x1b0 process_backlog+0x1ff/0x770 __napi_poll.constprop.0+0xa9/0x5c0 net_rx_action+0x7b3/0xb30 __do_softirq+0x1f0/0x940 do_softirq+0xa1/0xd0 __local_bh_enable_ip+0xd8/0x100 ip_finish_output2+0x6b7/0x18a0 __ip_queue_xmit+0x706/0x1aa0 __tcp_transmit_skb+0x2068/0x2e20 tcp_write_xmit+0xc9e/0x2bb0 __tcp_push_pending_frames+0x92/0x310 inet_shutdown+0x158/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae irq event stamp: 10687 hardirqs last enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40 hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90 softirqs last enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940 softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(clock-AF_INET); <Interrupt> lock(clock-AF_INET); *** DEADLOCK *** 5 locks held by nvme/1324: #0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0 #1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460 #2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330 #3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp] #4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300 stack backtrace: CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020 Call Trace: dump_stack+0x93/0xc2 mark_lock_irq.cold+0x2c/0xb3 ? verify_lock_unused+0x390/0x390 ? stack_trace_consume_entry+0x160/0x160 ? lock_downgrade+0x100/0x100 ? save_trace+0x88/0x5e0 ? _raw_spin_unlock_irqrestore+0x2d/0x40 mark_lock+0x530/0x1470 ? mark_lock_irq+0x1d10/0x1d10 ? enqueue_timer+0x660/0x660 mark_usage+0x215/0x2a0 __lock_acquire+0x79b/0x18d0 ? tcp_schedule_loss_probe.part.0+0x38c/0x520 lock_acquire+0x1ca/0x480 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? rcu_read_unlock+0x40/0x40 ? tcp_mtu_probe+0x1ae0/0x1ae0 ? kmalloc_reserve+0xa0/0xa0 ? sysfs_file_ops+0x170/0x170 _raw_read_lock+0x3d/0xa0 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? sysfs_file_ops+0x170/0x170 inet_shutdown+0x189/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 ? new_sync_read+0x600/0x600 ? lock_acquire+0x1ca/0x480 ? rcu_read_unlock+0x40/0x40 ? lock_is_held_type+0x9a/0x110 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 ? __ia32_sys_read+0xa0/0xa0 ? lockdep_hardirqs_on_prepare.part.0+0x198/0x340 ? syscall_enter_from_user_mode+0x27/0x70 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 872d26a ("nvmet-tcp: add NVMe over TCP target driver") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1748696 ] Commit eab2404 ("Bluetooth: Add BT_PHY socket option") added a dependency between socket lock and hci_dev->lock that could lead to deadlock. It turns out that hci_conn_get_phy() is not in any way relying on hdev being immutable during the runtime of this function, neither does it even look at any of the members of hdev, and as such there is no need to hold that lock. This fixes the lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.12.0-rc1-00026-g73d464503354 #10 Not tainted ------------------------------------------------------ bluetoothd/1118 is trying to acquire lock: ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth] but task is already holding lock: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}: lock_sock_nested+0x72/0xa0 l2cap_sock_ready_cb+0x18/0x70 [bluetooth] l2cap_config_rsp+0x27a/0x520 [bluetooth] l2cap_sig_channel+0x658/0x1330 [bluetooth] l2cap_recv_frame+0x1ba/0x310 [bluetooth] hci_rx_work+0x1cc/0x640 [bluetooth] process_one_work+0x244/0x5f0 worker_thread+0x3c/0x380 kthread+0x13e/0x160 ret_from_fork+0x22/0x30 -> #2 (&chan->lock#2/1){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x33a/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&conn->chan_lock){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x322/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 __mutex_lock+0xa3/0xa10 hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&chan->lock#2/1); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by bluetoothd/1118: #0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth] stack backtrace: CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 Call Trace: dump_stack+0x7f/0xa1 check_noncircular+0x105/0x120 ? __lock_acquire+0x147a/0x1a50 __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? __lock_acquire+0x2e1/0x1a50 ? lock_is_held_type+0xb4/0x120 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] __mutex_lock+0xa3/0xa10 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? lock_acquire+0x277/0x3d0 ? mark_held_locks+0x49/0x70 ? mark_held_locks+0x49/0x70 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb73df33eee Code: 48 8b 0d 85 0f 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 0f 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fffcfbbbf08 EFLAGS: 00000203 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 0000000000000019 RCX: 00007fb73df33eee RDX: 000000000000000e RSI: 0000000000000112 RDI: 0000000000000018 RBP: 0000000000000000 R08: 00007fffcfbbbf44 R09: 0000000000000000 R10: 00007fffcfbbbf3c R11: 0000000000000203 R12: 0000000000000000 R13: 0000000000000018 R14: 0000000000000000 R15: 0000556fcefc70d0 Fixes: eab2404 ("Bluetooth: Add BT_PHY socket option") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b8b2f37 ] When adding a PTE a ptesync is needed to order the update of the PTE with subsequent accesses otherwise a spurious fault may be raised. radix__set_pte_at() does not do this for performance gains. For non-kernel memory this is not an issue as any faults of this kind are corrected by the page fault handler. For kernel memory these faults are not handled. The current solution is that there is a ptesync in flush_cache_vmap() which should be called when mapping from the vmalloc region. However, map_kernel_page() does not call flush_cache_vmap(). This is troublesome in particular for code patching with Strict RWX on radix. In do_patch_instruction() the page frame that contains the instruction to be patched is mapped and then immediately patched. With no ordering or synchronization between setting up the PTE and writing to the page it is possible for faults. As the code patching is done using __put_user_asm_goto() the resulting fault is obscured - but using a normal store instead it can be seen: BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c Faulting instruction address: 0xc00000000008bd74 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: nop_module(PO+) [last unloaded: nop_module] CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43 NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810 REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000 CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1 This results in the kind of issue reported here: https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/ Chris Riedl suggested a reliable way to reproduce the issue: $ mount -t debugfs none /sys/kernel/debug $ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) & Turning ftrace on and off does a large amount of code patching which in usually less then 5min will crash giving a trace like: ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000) ------------[ ftrace bug ]------------ ftrace failed to modify [<c000000000bf8e5c>] napi_busy_loop+0xc/0x390 actual: 11:3b:47:4b Setting ftrace call site to call ftrace function ftrace record flags: 80000001 (1) expected tramp: c00000000006c96c ------------[ cut here ]------------ WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8 Modules linked in: nop_module(PO-) [last unloaded: nop_module] CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1 NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0 REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000 CFAR: c0000000001a9c98 IRQMASK: 0 GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022 GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8 GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118 GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000 GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008 GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8 GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020 GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0 NIP ftrace_bug+0x28c/0x2e8 LR ftrace_bug+0x288/0x2e8 Call Trace: ftrace_bug+0x288/0x2e8 (unreliable) ftrace_modify_all_code+0x168/0x210 arch_ftrace_update_code+0x18/0x30 ftrace_run_update_code+0x44/0xc0 ftrace_startup+0xf8/0x1c0 register_ftrace_function+0x4c/0xc0 function_trace_init+0x80/0xb0 tracing_set_tracer+0x2a4/0x4f0 tracing_set_trace_write+0xd4/0x130 vfs_write+0xf0/0x330 ksys_write+0x84/0x140 system_call_exception+0x14c/0x230 system_call_common+0xf0/0x27c To fix this when updating kernel memory PTEs using ptesync. Fixes: f1cb8f9 ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags") Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Tidy up change log slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 35b4f24 ] There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this. Fixes: 145cb2f ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK") Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5bbf219 ] An out of bounds write happens when setting the default power state. KASAN sees this as: [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 ================================================================== BUG: KASAN: slab-out-of-bounds in radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157 CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x239 kasan_report+0x170/0x1a8 radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon] radeon_atombios_get_power_modes+0x144/0x1888 [radeon] radeon_pm_init+0x1019/0x1904 [radeon] rs690_init+0x76e/0x84a [radeon] radeon_device_init+0x1c1a/0x21e5 [radeon] radeon_driver_load_kms+0xf5/0x30b [radeon] drm_dev_register+0x255/0x4a0 [drm] radeon_pci_probe+0x246/0x2f6 [radeon] pci_device_probe+0x1aa/0x294 really_probe+0x30e/0x850 driver_probe_device+0xe6/0x135 device_driver_attach+0xc1/0xf8 __driver_attach+0x13f/0x146 bus_for_each_dev+0xfa/0x146 bus_add_driver+0x2b3/0x447 driver_register+0x242/0x2c1 do_one_initcall+0x149/0x2fd do_init_module+0x1ae/0x573 load_module+0x4dee/0x5cca __do_sys_finit_module+0xf1/0x140 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Without KASAN, this will manifest later when the kernel attempts to allocate memory that was stomped, since it collides with the inline slab freelist pointer: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2 Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008 RIP: 0010:kfree+0x115/0x230 Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7 RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246 RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80 RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000 R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100 FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0 Call Trace: __free_fdtable+0x16/0x1f put_files_struct+0x81/0x9b do_exit+0x433/0x94d do_group_exit+0xa6/0xa6 __x64_sys_exit_group+0xf/0xf do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe80ef64bea Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0. RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0 R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0 Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ... Use a valid power_state index when initializing the "flags" and "misc" and "misc2" fields. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537 Reported-by: Erhard F. <erhard_f@mailbox.org> Fixes: a48b9b4 ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)") Fixes: 79daedc ("drm/radeon/kms: minor pm cleanups") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 1d5e464 upstream. Commit 4af22de ("arc: fix memory initialization for systems with two memory banks") fixed highmem, but for the PAE case it causes bug messages: | BUG: Bad page state in process swapper pfn:80000 | page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000 flags: 0x0() | raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000 | raw: 00000000 | page dumped because: nonzero mapcount | Modules linked in: | CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1 This is because the fix expects highmem to be always less than lowmem and uses min_low_pfn as an upper zone border for highmem. max_high_pfn should be ok for both highmem and highmem+PAE cases. Fixes: 4af22de ("arc: fix memory initialization for systems with two memory banks") Signed-off-by: Vladimir Isaev <isaev@synopsys.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: stable@vger.kernel.org #5.8 onwards Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 784daf2 upstream. The fstests test case generic/475 creates a dm-linear device that gets changed to a dm-error device. This leads to errors in loading the block group's zone information when running on a zoned file system, ultimately resulting in a list corruption. When running on a kernel with list debugging enabled this leads to the following crash. BTRFS: error (device dm-2) in cleanup_transaction:1953: errno=-5 IO failure kernel BUG at lib/list_debug.c:54! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 2433 Comm: umount Tainted: G W 5.12.0+ #1018 RIP: 0010:__list_del_entry_valid.cold+0x1d/0x47 RSP: 0018:ffffc90001473df0 EFLAGS: 00010296 RAX: 0000000000000054 RBX: ffff8881038fd000 RCX: ffffc90001473c90 RDX: 0000000100001a31 RSI: 0000000000000003 RDI: 0000000000000003 RBP: ffff888308871108 R08: 0000000000000003 R09: 0000000000000001 R10: 3961373532383838 R11: 6666666620736177 R12: ffff888308871000 R13: ffff8881038fd088 R14: ffff8881038fdc78 R15: dead000000000100 FS: 00007f353c9b1540(0000) GS:ffff888627d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f353cc2c710 CR3: 000000018e13c000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: btrfs_free_block_groups+0xc9/0x310 [btrfs] close_ctree+0x2ee/0x31a [btrfs] ? call_rcu+0x8f/0x270 ? mutex_lock+0x1c/0x40 generic_shutdown_super+0x67/0x100 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x90 cleanup_mnt+0x13e/0x1b0 task_work_run+0x63/0xb0 exit_to_user_mode_loop+0xd9/0xe0 exit_to_user_mode_prepare+0x3e/0x60 syscall_exit_to_user_mode+0x1d/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae As dm-error has no support for zones, btrfs will run it's zone emulation mode on this device. The zone emulation mode emulates conventional zones, so bail out if the zone bitmap that gets populated on mount sees the zone as sequential while we're thinking it's a conventional zone when creating a block group. Note: this scenario is unlikely in a real wold application and can only happen by this (ab)use of device-mapper targets. CC: stable@vger.kernel.org # 5.12+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8cc365f ] When running some traffic and taking down the link on peer, a retry counter exceeded error is received. This leads to nvmet_rdma_error_comp which tried accessing the cq_context to obtain the queue. The cq_context is no longer valid after the fix to use shared CQ mechanism and should be obtained similar to how it is obtained in other functions from the wc->qp. [ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12). [ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 905.839919] PGD 0 P4D 0 [ 905.842464] Oops: 0000 1 SMP NOPTI [ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1 [ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma] [ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff [ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246 [ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000 [ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000 [ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074 [ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010 [ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400 [ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000 [ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12). [ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0 [ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 905.961857] PKRU: 55555554 [ 906.010315] Call Trace: [ 906.012778] __ib_process_cq+0x89/0x170 [ib_core] [ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core] [ 906.022152] process_one_work+0x1a7/0x360 [ 906.026182] ? create_worker+0x1a0/0x1a0 [ 906.030123] worker_thread+0x30/0x390 [ 906.033802] ? create_worker+0x1a0/0x1a0 [ 906.037744] kthread+0x116/0x130 [ 906.040988] ? kthread_flush_work_fn+0x10/0x10 [ 906.045456] ret_from_fork+0x1f/0x40 Fixes: ca0f1a8 ("nvmet-rdma: use new shared CQ mechanism") Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a949dc5 ] pos_fsstress testcase complains a panic as belew: ------------[ cut here ]------------ kernel BUG at fs/f2fs/compress.c:1082! invalid opcode: 0000 [#1] SMP PTI CPU: 4 PID: 2753477 Comm: kworker/u16:2 Tainted: G OE 5.12.0-rc1-custom #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: writeback wb_workfn (flush-252:16) RIP: 0010:prepare_compress_overwrite+0x4c0/0x760 [f2fs] Call Trace: f2fs_prepare_compress_overwrite+0x5f/0x80 [f2fs] f2fs_write_cache_pages+0x468/0x8a0 [f2fs] f2fs_write_data_pages+0x2a4/0x2f0 [f2fs] do_writepages+0x38/0xc0 __writeback_single_inode+0x44/0x2a0 writeback_sb_inodes+0x223/0x4d0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x1dd/0x290 wb_workfn+0x309/0x500 process_one_work+0x220/0x3c0 worker_thread+0x53/0x420 kthread+0x12f/0x150 ret_from_fork+0x22/0x30 The root cause is truncate() may race with overwrite as below, so that one reference count left in page can not guarantee the page attaching in mapping tree all the time, after truncation, later find_lock_page() may return NULL pointer. - prepare_compress_overwrite - f2fs_pagecache_get_page - unlock_page - f2fs_setattr - truncate_setsize - truncate_inode_page - delete_from_page_cache - find_lock_page Fix this by avoiding referencing updated page. Fixes: 4c8ff70 ("f2fs: support data compression") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 79ebe91 ] Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put(). Fixes: e9e006f ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke <sunke32@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20210512114331.1233964-2-sunke32@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 1f4642b upstream. commit 4dbc6a4 ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command. Fixes: 992a60e ("usb: typec: ucsi: register with power_supply class") Fixes: 4dbc6a4 ("usb: typec: ucsi: save power data objects in PD mode") Cc: stable@vger.kernel.org Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 402be8a upstream. The retire logic uses the 2 lower bits of the pointer to the retire function to store flags. However, the auto_retire function is not guaranteed to be aligned to a multiple of 4, which causes crashes as we jump to the wrong address, for example like this: 2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI 2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1 2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021 2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work 2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20 2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74 2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0 2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace: 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer cros_ec_sensors_ring kfifo_buf industrialio cros_ec_sensorhub 2021-04-24T18:03:53.804337Z WARNING kernel: [ 516.876972] cdc_ether usbnet iwlmvm lzo_rle lzo_compress iwl7000_mac80211 iwlwifi zram cfg80211 r8152 mii btusb btrtl btintel btbcm bluetooth ecdh_generic ecc joydev 2021-04-24T18:03:53.804337Z EMERG kernel: [ 516.879169] gsmi: Log Shutdown Reason 0x03 This change fixes this by aligning the function. Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Fixes: 229007e ("drm/i915: Wrap i915_active in a simple kreffed struct") Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210429031021.1218091-1-marcheu@chromium.org (cherry picked from commit ca419f4) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 9f85cbe ("RDMA/uverbs: Expose the new GID query API to user space") Link: https://lore.kernel.org/r/b971cc70a8b240a8b5eda33c99fa0558a0071be2.1620657876.git.leonro@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Generally a delayed iput is added when we might do the final iput, so usually we'll end up sleeping while processing the delayed iputs naturally. However there's no guarantee of this, especially for small files. In production we noticed 5 instances of RCU stalls while testing a kernel release overnight across 1000 machines, so this is relatively common: host count: 5 rcu: INFO: rcu_sched self-detected stall on CPU rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208 (t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1 CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1 Call Trace: <IRQ> dump_stack+0x50/0x70 nmi_cpu_backtrace.cold.6+0x30/0x65 ? lapic_can_unplug_cpu.cold.30+0x40/0x40 nmi_trigger_cpumask_backtrace+0xba/0xca rcu_dump_cpu_stacks+0x99/0xc7 rcu_sched_clock_irq.cold.90+0x1b2/0x3a3 ? trigger_load_balance+0x5c/0x200 ? tick_sched_do_timer+0x60/0x60 ? tick_sched_do_timer+0x60/0x60 update_process_times+0x24/0x50 tick_sched_timer+0x37/0x70 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0 RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029 RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200 RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200 R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870 ? kzalloc.constprop.57+0x30/0x30 list_lru_add+0x5a/0x100 inode_lru_list_add+0x20/0x40 iput+0x1c1/0x1f0 run_delayed_iput_locked+0x46/0x90 btrfs_run_delayed_iputs+0x3f/0x60 cleaner_kthread+0xf2/0x120 kthread+0x10b/0x130 Fix this by adding a cond_resched_lock() to the loop processing delayed iputs so we can avoid these sort of stalls. CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

When we move one inode from one directory to another and both the inode and its previous parent directory were logged before, we are not supposed to have the dentry for the old parent if we have a power failure after the log is synced. Only the new dentry is supposed to exist. Generally this works correctly, however there is a scenario where this is not currently working, because the old parent of the file/directory that was moved is not authoritative for a range that includes the dir index and dir item keys of the old dentry. This case is better explained with the following example and reproducer: # The test requires a very specific layout of keys and items in the # fs/subvolume btree to trigger the bug. So we want to make sure that # on whatever platform we are, we have the same leaf/node size. # # Currently in btrfs the node/leaf size can not be smaller than the page # size (but it can be greater than the page size). So use the largest # supported node/leaf size (64K). $ mkfs.btrfs -f -n 65536 /dev/sdc $ mount /dev/sdc /mnt # "testdir" is inode 257. $ mkdir /mnt/testdir $ chmod 755 /mnt/testdir # Create several empty files to have the directory "testdir" with its # items spread over several leaves (7 in this case). $ for ((i = 1; i <= 1200; i++)); do echo -n > /mnt/testdir/file$i done # Create our test directory "dira", inode number 1458, which gets all # its items in leaf 7. # # The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to # the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY # item that points to that entry is in leaf 3. # # For this particular filesystem node size (64K), file count and file # names, we endup with the directory entry items from inode 257 in # leaves 2 and 3, as previously mentioned - what matters for triggering # the bug exercised by this test case is that those items are not placed # in leaf 1, they must be placed in a leaf different from the one # containing the inode item for inode 257. # # The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for # the parent inode (257) are the following: # # item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira # # and: # # item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira $ mkdir /mnt/testdir/dira # Make sure everything done so far is durably persisted. $ sync # Now do a change to inode 257 ("testdir") that does not result in # COWing leaves 2 and 3 - the leaves that contain the directory items # pointing to inode 1458 (directory "dira"). # # Changing permissions, the owner/group, updating or adding a xattr, # etc, will not change (COW) leaves 2 and 3. So for the sake of # simplicity change the permissions of inode 257, which results in # updating its inode item and therefore change (COW) only leaf 1. $ chmod 700 /mnt/testdir # Now fsync directory inode 257. # # Since only the first leaf was changed/COWed, we log the inode item of # inode 257 and only the dentries found in the first leaf, all have a # key type of BTRFS_DIR_ITEM_KEY, and no keys of type # BTRFS_DIR_INDEX_KEY, because they sort after the former type and none # exist in the first leaf. # # We also log 3 items that represent ranges for dir items and dir # indexes for which the log is authoritative: # # 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is # authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset # in the range [0, 2285968570] (the offset here is the crc32c of the # dentry's name). The value 2285968570 corresponds to the offset of # the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY); # # 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is # authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset # in the range [4293818216, (u64)-1] (the offset here is the crc32c # of the dentry's name). The value 4293818216 corresponds to the # offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1 # (4293818215 + 1), which is located in leaf 2; # # 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203, # which indicates the log is authoritative for all keys of type # BTRFS_DIR_INDEX_KEY that have an offset in the range # [1203, (u64)-1]. The value 1203 corresponds to the offset of the # last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is # located in leaf 3; # # Also, because "testdir" is a directory and inode 1458 ("dira") is a # child directory, we log inode 1458 too. $ xfs_io -c "fsync" /mnt/testdir # Now move "dira", inode 1458, to be a child of the root directory # (inode 256). # # Because this inode was previously logged, when "testdir" was fsynced, # the log is updated so that the old inode reference, referring to inode # 257 as the parent, is deleted and the new inode reference, referring # to inode 256 as the parent, is added to the log. $ mv /mnt/testdir/dira /mnt # Now change some file and fsync it. This guarantees the log changes # made by the previous move/rename operation are persisted. We do not # need to do any special modification to the file, just any change to # any file and sync the log. $ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/testdir/file1 # Simulate a power failure and then mount again the filesystem to # replay the log tree. We want to verify that we are able to mount the # filesystem, meaning log replay was successful, and that directory # inode 1458 ("dira") only has inode 256 (the filesystem's root) as # its parent (and no longer a child of inode 257). # # It used to happen that during log replay we would end up having # inode 1458 (directory "dira") with 2 hard links, being a child of # inode 257 ("testdir") and inode 256 (the filesystem's root). This # resulted in the tree checker detecting the issue and causing the # mount operation to fail (with -EIO). # # This happened because in the log we have the new name/parent for # inode 1458, which results in adding the new dentry with inode 256 # as the parent, but the previous dentry, under inode 257 was never # removed - this is because the ranges for dir items and dir indexes # of inode 257 for which the log is authoritative do not include the # old dir item and dir index for the dentry of inode 257 referring to # inode 1458: # # - for dir items, the log is authoritative for the ranges # [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257 # pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as # previously mentioned, so the dir item is not deleted when the log # replay procedure processes the authoritative ranges, as 3724298081 # is outside both ranges; # # - for dir indexes, the log is authoritative for the range # [1203, (u64)-1], and the dir index item of inode 257 pointing to # inode 1458 has a key of (257 DIR_INDEX 1202), as previously # mentioned, so the dir index item is not deleted when the log # replay procedure processes the authoritative range. <power failure> $ mount /dev/sdc /mnt mount: /mnt: can't read superblock on /dev/sdc. $ dmesg (...) [87849.840509] BTRFS info (device sdc): start tree-log replay [87849.875719] BTRFS critical (device sdc): corrupt leaf: root=5 block=30539776 slot=554 ino=1458, invalid nlink: has 2 expect no more than 1 for dir [87849.878084] BTRFS info (device sdc): leaf 30539776 gen 7 total ptrs 557 free space 2092 owner 5 [87849.879516] BTRFS info (device sdc): refs 1 lock_owner 0 current 2099108 [87849.880613] item 0 key (1181 1 0) itemoff 65275 itemsize 160 [87849.881544] inode generation 6 size 0 mode 100644 [87849.882692] item 1 key (1181 12 257) itemoff 65258 itemsize 17 (...) [87850.562549] item 556 key (1458 12 257) itemoff 16017 itemsize 14 [87850.563349] BTRFS error (device dm-0): block=30539776 write time tree block corruption detected [87850.564386] ------------[ cut here ]------------ [87850.564920] WARNING: CPU: 3 PID: 2099108 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs] [87850.566129] Modules linked in: btrfs dm_zero dm_snapshot (...) [87850.573789] CPU: 3 PID: 2099108 Comm: mount Not tainted 5.12.0-rc8-btrfs-next-86 #1 (...) [87850.587481] Call Trace: [87850.587768] btree_csum_one_bio+0x244/0x2b0 [btrfs] [87850.588354] ? btrfs_bio_fits_in_stripe+0xd8/0x110 [btrfs] [87850.589003] btrfs_submit_metadata_bio+0xb7/0x100 [btrfs] [87850.589654] submit_one_bio+0x61/0x70 [btrfs] [87850.590248] submit_extent_page+0x91/0x2f0 [btrfs] [87850.590842] write_one_eb+0x175/0x440 [btrfs] [87850.591370] ? find_extent_buffer_nolock+0x1c0/0x1c0 [btrfs] [87850.592036] btree_write_cache_pages+0x1e6/0x610 [btrfs] [87850.592665] ? free_debug_processing+0x1d5/0x240 [87850.593209] do_writepages+0x43/0xf0 [87850.593798] ? __filemap_fdatawrite_range+0xa4/0x100 [87850.594391] __filemap_fdatawrite_range+0xc5/0x100 [87850.595196] btrfs_write_marked_extents+0x68/0x160 [btrfs] [87850.596202] btrfs_write_and_wait_transaction.isra.0+0x4d/0xd0 [btrfs] [87850.597377] btrfs_commit_transaction+0x794/0xca0 [btrfs] [87850.598455] ? _raw_spin_unlock_irqrestore+0x32/0x60 [87850.599305] ? kmem_cache_free+0x15a/0x3d0 [87850.600029] btrfs_recover_log_trees+0x346/0x380 [btrfs] [87850.601021] ? replay_one_extent+0x7d0/0x7d0 [btrfs] [87850.601988] open_ctree+0x13c9/0x1698 [btrfs] [87850.602846] btrfs_mount_root.cold+0x13/0xed [btrfs] [87850.603771] ? kmem_cache_alloc_trace+0x7c9/0x930 [87850.604576] ? vfs_parse_fs_string+0x5d/0xb0 [87850.605293] ? kfree+0x276/0x3f0 [87850.605857] legacy_get_tree+0x30/0x50 [87850.606540] vfs_get_tree+0x28/0xc0 [87850.607163] fc_mount+0xe/0x40 [87850.607695] vfs_kern_mount.part.0+0x71/0x90 [87850.608440] btrfs_mount+0x13b/0x3e0 [btrfs] (...) [87850.629477] ---[ end trace 68802022b99a1ea0 ]--- [87850.630849] BTRFS: error (device sdc) in btrfs_commit_transaction:2381: errno=-5 IO failure (Error while writing out transaction) [87850.632422] BTRFS warning (device sdc): Skipping commit of aborted transaction. [87850.633416] BTRFS: error (device sdc) in cleanup_transaction:1978: errno=-5 IO failure [87850.634553] BTRFS: error (device sdc) in btrfs_replay_log:2431: errno=-5 IO failure (Failed to recover log tree) [87850.637529] BTRFS error (device sdc): open_ctree failed In this example the inode we moved was a directory, so it was easy to detect the problem because directories can only have one hard link and the tree checker immediately detects that. If the moved inode was a file, then the log replay would succeed and we would end up having both the new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present, but only the new one should be present. Fix this by forcing re-logging of the old parent directory when logging the new name during a rename operation. This ensures we end up with a log that is authoritative for a range covering the keys for the old dentry, therefore causing the old dentry do be deleted when replaying the log. A test case for fstests will follow up soon. Fixes: 64d6b28 ("btrfs: remove unnecessary check_parent_dirs_for_sync()") CC: stable@vger.kernel.org # 5.12+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

…xtent When cloning an inline extent there are a few cases, such as when we have an implicit hole at file offset 0, where we start a transaction while holding a read lock on a leaf. Starting the transaction results in a call to sb_start_intwrite(), which results in doing a read lock on a percpu semaphore. Lockdep doesn't like this and complains about it: [46.580704] ====================================================== [46.580752] WARNING: possible circular locking dependency detected [46.580799] 5.13.0-rc1 #28 Not tainted [46.580832] ------------------------------------------------------ [46.580877] cloner/3835 is trying to acquire lock: [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0 [46.581167] [46.581167] but task is already holding lock: [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.581293] [46.581293] which lock already depends on the new lock. [46.581293] [46.581351] [46.581351] the existing dependency chain (in reverse order) is: [46.581410] [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}: [46.581464] down_read_nested+0x68/0x200 [46.581536] __btrfs_tree_read_lock+0x70/0x1d0 [46.581577] btrfs_read_lock_root_node+0x88/0x200 [46.581623] btrfs_search_slot+0x298/0xb70 [46.581665] btrfs_set_inode_index+0xfc/0x260 [46.581708] btrfs_new_inode+0x26c/0x950 [46.581749] btrfs_create+0xf4/0x2b0 [46.581782] lookup_open.isra.57+0x55c/0x6a0 [46.581855] path_openat+0x418/0xd20 [46.581888] do_filp_open+0x9c/0x130 [46.581920] do_sys_openat2+0x2ec/0x430 [46.581961] do_sys_open+0x90/0xc0 [46.581993] system_call_exception+0x3d4/0x410 [46.582037] system_call_common+0xec/0x278 [46.582078] [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}: [46.582135] __lock_acquire+0x1e90/0x2c50 [46.582176] lock_acquire+0x2b4/0x5b0 [46.582263] start_transaction+0x3cc/0x950 [46.582308] clone_copy_inline_extent+0xe4/0x5a0 [46.582353] btrfs_clone+0x5fc/0x880 [46.582388] btrfs_clone_files+0xd8/0x1c0 [46.582434] btrfs_remap_file_range+0x3d8/0x590 [46.582481] do_clone_file_range+0x10c/0x270 [46.582558] vfs_clone_file_range+0x1b0/0x310 [46.582605] ioctl_file_clone+0x90/0x130 [46.582651] do_vfs_ioctl+0x874/0x1ac0 [46.582697] sys_ioctl+0x6c/0x120 [46.582733] system_call_exception+0x3d4/0x410 [46.582777] system_call_common+0xec/0x278 [46.582822] [46.582822] other info that might help us debug this: [46.582822] [46.582888] Possible unsafe locking scenario: [46.582888] [46.582942] CPU0 CPU1 [46.582984] ---- ---- [46.583028] lock(btrfs-tree-00); [46.583062] lock(sb_internal#2); [46.583119] lock(btrfs-tree-00); [46.583174] lock(sb_internal#2); [46.583212] [46.583212] *** DEADLOCK *** [46.583212] [46.583266] 6 locks held by cloner/3835: [46.583299] #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130 [46.583382] #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0 [46.583477] #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0 [46.583574] #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590 [46.583657] #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590 [46.583743] #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0 [46.583828] [46.583828] stack backtrace: [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28 [46.583931] Call Trace: [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable) [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400 [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190 [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50 [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0 [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950 [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0 [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880 [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0 [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590 [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270 [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310 [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130 [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0 [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120 [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410 [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278 [46.585114] --- interrupt: c00 at 0x7ffff7e22990 [46.585160] NIP: 00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000 [46.585224] REGS: c0000000167c7e80 TRAP: 0c00 Not tainted (5.13.0-rc1) [46.585280] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000244 XER: 00000000 [46.585374] IRQMASK: 0 [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004 [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000 [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000 [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000 [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004 [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990 [46.585964] LR [00000001000010ec] 0x1000010ec [46.586010] --- interrupt: c00 This should be a false positive, as both locks are acquired in read mode. Nevertheless, we don't need to hold a leaf locked when we start the transaction, so just release the leaf (path) before starting it. Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

While doing error injection testing I got the following panic kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log: [ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer [ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario: [ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK *** [ 806.333747] May be due to missing lock nesting notation [ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu] Signed-off-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Christian KÃnig <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 54d8791 ] The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 9f85cbe ("RDMA/uverbs: Expose the new GID query API to user space") Link: https://lore.kernel.org/r/b971cc70a8b240a8b5eda33c99fa0558a0071be2.1620657876.git.leonro@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 71795ee upstream. Generally a delayed iput is added when we might do the final iput, so usually we'll end up sleeping while processing the delayed iputs naturally. However there's no guarantee of this, especially for small files. In production we noticed 5 instances of RCU stalls while testing a kernel release overnight across 1000 machines, so this is relatively common: host count: 5 rcu: INFO: rcu_sched self-detected stall on CPU rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208 (t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1 CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1 Call Trace: <IRQ> dump_stack+0x50/0x70 nmi_cpu_backtrace.cold.6+0x30/0x65 ? lapic_can_unplug_cpu.cold.30+0x40/0x40 nmi_trigger_cpumask_backtrace+0xba/0xca rcu_dump_cpu_stacks+0x99/0xc7 rcu_sched_clock_irq.cold.90+0x1b2/0x3a3 ? trigger_load_balance+0x5c/0x200 ? tick_sched_do_timer+0x60/0x60 ? tick_sched_do_timer+0x60/0x60 update_process_times+0x24/0x50 tick_sched_timer+0x37/0x70 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0 RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029 RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200 RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200 R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870 ? kzalloc.constprop.57+0x30/0x30 list_lru_add+0x5a/0x100 inode_lru_list_add+0x20/0x40 iput+0x1c1/0x1f0 run_delayed_iput_locked+0x46/0x90 btrfs_run_delayed_iputs+0x3f/0x60 cleaner_kthread+0xf2/0x120 kthread+0x10b/0x130 Fix this by adding a cond_resched_lock() to the loop processing delayed iputs so we can avoid these sort of stalls. CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 54a40fc upstream. When we move one inode from one directory to another and both the inode and its previous parent directory were logged before, we are not supposed to have the dentry for the old parent if we have a power failure after the log is synced. Only the new dentry is supposed to exist. Generally this works correctly, however there is a scenario where this is not currently working, because the old parent of the file/directory that was moved is not authoritative for a range that includes the dir index and dir item keys of the old dentry. This case is better explained with the following example and reproducer: # The test requires a very specific layout of keys and items in the # fs/subvolume btree to trigger the bug. So we want to make sure that # on whatever platform we are, we have the same leaf/node size. # # Currently in btrfs the node/leaf size can not be smaller than the page # size (but it can be greater than the page size). So use the largest # supported node/leaf size (64K). $ mkfs.btrfs -f -n 65536 /dev/sdc $ mount /dev/sdc /mnt # "testdir" is inode 257. $ mkdir /mnt/testdir $ chmod 755 /mnt/testdir # Create several empty files to have the directory "testdir" with its # items spread over several leaves (7 in this case). $ for ((i = 1; i <= 1200; i++)); do echo -n > /mnt/testdir/file$i done # Create our test directory "dira", inode number 1458, which gets all # its items in leaf 7. # # The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to # the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY # item that points to that entry is in leaf 3. # # For this particular filesystem node size (64K), file count and file # names, we endup with the directory entry items from inode 257 in # leaves 2 and 3, as previously mentioned - what matters for triggering # the bug exercised by this test case is that those items are not placed # in leaf 1, they must be placed in a leaf different from the one # containing the inode item for inode 257. # # The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for # the parent inode (257) are the following: # # item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira # # and: # # item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira $ mkdir /mnt/testdir/dira # Make sure everything done so far is durably persisted. $ sync # Now do a change to inode 257 ("testdir") that does not result in # COWing leaves 2 and 3 - the leaves that contain the directory items # pointing to inode 1458 (directory "dira"). # # Changing permissions, the owner/group, updating or adding a xattr, # etc, will not change (COW) leaves 2 and 3. So for the sake of # simplicity change the permissions of inode 257, which results in # updating its inode item and therefore change (COW) only leaf 1. $ chmod 700 /mnt/testdir # Now fsync directory inode 257. # # Since only the first leaf was changed/COWed, we log the inode item of # inode 257 and only the dentries found in the first leaf, all have a # key type of BTRFS_DIR_ITEM_KEY, and no keys of type # BTRFS_DIR_INDEX_KEY, because they sort after the former type and none # exist in the first leaf. # # We also log 3 items that represent ranges for dir items and dir # indexes for which the log is authoritative: # # 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is # authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset # in the range [0, 2285968570] (the offset here is the crc32c of the # dentry's name). The value 2285968570 corresponds to the offset of # the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY); # # 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is # authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset # in the range [4293818216, (u64)-1] (the offset here is the crc32c # of the dentry's name). The value 4293818216 corresponds to the # offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1 # (4293818215 + 1), which is located in leaf 2; # # 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203, # which indicates the log is authoritative for all keys of type # BTRFS_DIR_INDEX_KEY that have an offset in the range # [1203, (u64)-1]. The value 1203 corresponds to the offset of the # last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is # located in leaf 3; # # Also, because "testdir" is a directory and inode 1458 ("dira") is a # child directory, we log inode 1458 too. $ xfs_io -c "fsync" /mnt/testdir # Now move "dira", inode 1458, to be a child of the root directory # (inode 256). # # Because this inode was previously logged, when "testdir" was fsynced, # the log is updated so that the old inode reference, referring to inode # 257 as the parent, is deleted and the new inode reference, referring # to inode 256 as the parent, is added to the log. $ mv /mnt/testdir/dira /mnt # Now change some file and fsync it. This guarantees the log changes # made by the previous move/rename operation are persisted. We do not # need to do any special modification to the file, just any change to # any file and sync the log. $ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/testdir/file1 # Simulate a power failure and then mount again the filesystem to # replay the log tree. We want to verify that we are able to mount the # filesystem, meaning log replay was successful, and that directory # inode 1458 ("dira") only has inode 256 (the filesystem's root) as # its parent (and no longer a child of inode 257). # # It used to happen that during log replay we would end up having # inode 1458 (directory "dira") with 2 hard links, being a child of # inode 257 ("testdir") and inode 256 (the filesystem's root). This # resulted in the tree checker detecting the issue and causing the # mount operation to fail (with -EIO). # # This happened because in the log we have the new name/parent for # inode 1458, which results in adding the new dentry with inode 256 # as the parent, but the previous dentry, under inode 257 was never # removed - this is because the ranges for dir items and dir indexes # of inode 257 for which the log is authoritative do not include the # old dir item and dir index for the dentry of inode 257 referring to # inode 1458: # # - for dir items, the log is authoritative for the ranges # [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257 # pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as # previously mentioned, so the dir item is not deleted when the log # replay procedure processes the authoritative ranges, as 3724298081 # is outside both ranges; # # - for dir indexes, the log is authoritative for the range # [1203, (u64)-1], and the dir index item of inode 257 pointing to # inode 1458 has a key of (257 DIR_INDEX 1202), as previously # mentioned, so the dir index item is not deleted when the log # replay procedure processes the authoritative range. <power failure> $ mount /dev/sdc /mnt mount: /mnt: can't read superblock on /dev/sdc. $ dmesg (...) [87849.840509] BTRFS info (device sdc): start tree-log replay [87849.875719] BTRFS critical (device sdc): corrupt leaf: root=5 block=30539776 slot=554 ino=1458, invalid nlink: has 2 expect no more than 1 for dir [87849.878084] BTRFS info (device sdc): leaf 30539776 gen 7 total ptrs 557 free space 2092 owner 5 [87849.879516] BTRFS info (device sdc): refs 1 lock_owner 0 current 2099108 [87849.880613] item 0 key (1181 1 0) itemoff 65275 itemsize 160 [87849.881544] inode generation 6 size 0 mode 100644 [87849.882692] item 1 key (1181 12 257) itemoff 65258 itemsize 17 (...) [87850.562549] item 556 key (1458 12 257) itemoff 16017 itemsize 14 [87850.563349] BTRFS error (device dm-0): block=30539776 write time tree block corruption detected [87850.564386] ------------[ cut here ]------------ [87850.564920] WARNING: CPU: 3 PID: 2099108 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs] [87850.566129] Modules linked in: btrfs dm_zero dm_snapshot (...) [87850.573789] CPU: 3 PID: 2099108 Comm: mount Not tainted 5.12.0-rc8-btrfs-next-86 #1 (...) [87850.587481] Call Trace: [87850.587768] btree_csum_one_bio+0x244/0x2b0 [btrfs] [87850.588354] ? btrfs_bio_fits_in_stripe+0xd8/0x110 [btrfs] [87850.589003] btrfs_submit_metadata_bio+0xb7/0x100 [btrfs] [87850.589654] submit_one_bio+0x61/0x70 [btrfs] [87850.590248] submit_extent_page+0x91/0x2f0 [btrfs] [87850.590842] write_one_eb+0x175/0x440 [btrfs] [87850.591370] ? find_extent_buffer_nolock+0x1c0/0x1c0 [btrfs] [87850.592036] btree_write_cache_pages+0x1e6/0x610 [btrfs] [87850.592665] ? free_debug_processing+0x1d5/0x240 [87850.593209] do_writepages+0x43/0xf0 [87850.593798] ? __filemap_fdatawrite_range+0xa4/0x100 [87850.594391] __filemap_fdatawrite_range+0xc5/0x100 [87850.595196] btrfs_write_marked_extents+0x68/0x160 [btrfs] [87850.596202] btrfs_write_and_wait_transaction.isra.0+0x4d/0xd0 [btrfs] [87850.597377] btrfs_commit_transaction+0x794/0xca0 [btrfs] [87850.598455] ? _raw_spin_unlock_irqrestore+0x32/0x60 [87850.599305] ? kmem_cache_free+0x15a/0x3d0 [87850.600029] btrfs_recover_log_trees+0x346/0x380 [btrfs] [87850.601021] ? replay_one_extent+0x7d0/0x7d0 [btrfs] [87850.601988] open_ctree+0x13c9/0x1698 [btrfs] [87850.602846] btrfs_mount_root.cold+0x13/0xed [btrfs] [87850.603771] ? kmem_cache_alloc_trace+0x7c9/0x930 [87850.604576] ? vfs_parse_fs_string+0x5d/0xb0 [87850.605293] ? kfree+0x276/0x3f0 [87850.605857] legacy_get_tree+0x30/0x50 [87850.606540] vfs_get_tree+0x28/0xc0 [87850.607163] fc_mount+0xe/0x40 [87850.607695] vfs_kern_mount.part.0+0x71/0x90 [87850.608440] btrfs_mount+0x13b/0x3e0 [btrfs] (...) [87850.629477] ---[ end trace 68802022b99a1ea0 ]--- [87850.630849] BTRFS: error (device sdc) in btrfs_commit_transaction:2381: errno=-5 IO failure (Error while writing out transaction) [87850.632422] BTRFS warning (device sdc): Skipping commit of aborted transaction. [87850.633416] BTRFS: error (device sdc) in cleanup_transaction:1978: errno=-5 IO failure [87850.634553] BTRFS: error (device sdc) in btrfs_replay_log:2431: errno=-5 IO failure (Failed to recover log tree) [87850.637529] BTRFS error (device sdc): open_ctree failed In this example the inode we moved was a directory, so it was easy to detect the problem because directories can only have one hard link and the tree checker immediately detects that. If the moved inode was a file, then the log replay would succeed and we would end up having both the new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present, but only the new one should be present. Fix this by forcing re-logging of the old parent directory when logging the new name during a rename operation. This ensures we end up with a log that is authoritative for a range covering the keys for the old dentry, therefore causing the old dentry do be deleted when replaying the log. A test case for fstests will follow up soon. Fixes: 64d6b28 ("btrfs: remove unnecessary check_parent_dirs_for_sync()") CC: stable@vger.kernel.org # 5.12+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e181811 upstream. The new ana_log_size should be used instead of the old one. Or kernel NULL pointer dereference will happen like below: [ 38.957849][ T69] BUG: kernel NULL pointer dereference, address: 000000000000003c [ 38.975550][ T69] #PF: supervisor write access in kernel mode [ 38.975955][ T69] #PF: error_code(0x0002) - not-present page [ 38.976905][ T69] PGD 0 P4D 0 [ 38.979388][ T69] Oops: 0002 [#1] SMP NOPTI [ 38.980488][ T69] CPU: 0 PID: 69 Comm: kworker/0:2 Not tainted 5.12.0+ #54 [ 38.981254][ T69] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 38.982502][ T69] Workqueue: events nvme_loop_execute_work [ 38.985219][ T69] RIP: 0010:memcpy_orig+0x68/0x10f [ 38.986203][ T69] Code: 83 c2 20 eb 44 48 01 d6 48 01 d7 48 83 ea 20 0f 1f 00 48 83 ea 20 4c 8b 46 f8 4c 8b 4e f0 4c 8b 56 e8 4c 8b 5e e0 48 8d 76 e0 <4c> 89 47 f8 4c 89 4f f0 4c 89 57 e8 4c 89 5f e0 48 8d 7f e0 73 d2 [ 38.987677][ T69] RSP: 0018:ffffc900001b7d48 EFLAGS: 00000287 [ 38.987996][ T69] RAX: 0000000000000020 RBX: 0000000000000024 RCX: 0000000000000010 [ 38.988327][ T69] RDX: ffffffffffffffe4 RSI: ffff8881084bc004 RDI: 0000000000000044 [ 38.988620][ T69] RBP: 0000000000000024 R08: 0000000100000000 R09: 0000000000000000 [ 38.988991][ T69] R10: 0000000100000000 R11: 0000000000000001 R12: 0000000000000024 [ 38.989289][ T69] R13: ffff8881084bc000 R14: 0000000000000000 R15: 0000000000000024 [ 38.989845][ T69] FS: 0000000000000000(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 [ 38.990234][ T69] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 38.990490][ T69] CR2: 000000000000003c CR3: 00000001085b2000 CR4: 00000000000006f0 [ 38.991105][ T69] Call Trace: [ 38.994157][ T69] sg_copy_buffer+0xb8/0xf0 [ 38.995357][ T69] nvmet_copy_to_sgl+0x48/0x6d [ 38.995565][ T69] nvmet_execute_get_log_page_ana+0xd4/0x1cb [ 38.995792][ T69] nvmet_execute_get_log_page+0xc9/0x146 [ 38.995992][ T69] nvme_loop_execute_work+0x3e/0x44 [ 38.996181][ T69] process_one_work+0x1c3/0x3c0 [ 38.996393][ T69] worker_thread+0x44/0x3d0 [ 38.996600][ T69] ? cancel_delayed_work+0x90/0x90 [ 38.996804][ T69] kthread+0xf7/0x130 [ 38.996961][ T69] ? kthread_create_worker_on_cpu+0x70/0x70 [ 38.997171][ T69] ret_from_fork+0x22/0x30 [ 38.997705][ T69] Modules linked in: [ 38.998741][ T69] CR2: 000000000000003c [ 39.000104][ T69] ---[ end trace e719927b609d0fa0 ]--- Fixes: 5e1f689 ("nvme-multipath: fix double initialization of ANA state") Signed-off-by: Hou Pu <houpu.main@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The recursion check in __bpf_prog_enter and __bpf_prog_exit leaves some (not inlined) functions unprotected: In __bpf_prog_enter: - migrate_disable is called before prog->active is checked In __bpf_prog_exit: - migrate_enable,rcu_read_unlock_strict are called after prog->active is decreased When attaching trampoline to them we get panic like: traps: PANIC: double fault, error_code: 0x0 double fault: 0000 [#1] SMP PTI RIP: 0010:__bpf_prog_enter+0x4/0x50 ... Call Trace: <IRQ> bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 __bpf_prog_enter+0x9/0x50 bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 __bpf_prog_enter+0x9/0x50 bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 __bpf_prog_enter+0x9/0x50 bpf_trampoline_6442466513_0+0x18/0x1000 migrate_disable+0x5/0x50 ... Fixing this by adding deny list of btf ids for tracing programs and checking btf id during program verification. Adding above functions to this list. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210429114712.43783-1-jolsa@kernel.org

…to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_sublist_rcv_finish+0x4f/0x60 [709732.359243] ip_sublist_rcv+0x196/0x220 [709732.359250] ? ip_rcv_finish_core.isra.22+0x400/0x400 [709732.359255] ip_list_rcv+0x137/0x160 [709732.359264] __netif_receive_skb_list_core+0x29b/0x2c0 [709732.359272] netif_receive_skb_list_internal+0x1a6/0x2d0 [709732.359280] gro_normal_list.part.156+0x19/0x40 [709732.359286] napi_complete_done+0x67/0x170 [709732.359298] bnxt_poll+0x105/0x190 [bnxt_en] [709732.359304] ? irqentry_exit+0x29/0x30 [709732.359309] ? asm_common_interrupt+0x1e/0x40 [709732.359315] net_rx_action+0x144/0x3c0 [709732.359322] __do_softirq+0xd5/0x29c [709732.359329] asm_call_irq_on_stack+0xf/0x20 [709732.359332] </IRQ> [709732.359339] do_softirq_own_stack+0x37/0x40 [709732.359346] irq_exit_rcu+0x9d/0xa0 [709732.359353] common_interrupt+0x78/0x130 [709732.359358] asm_common_interrupt+0x1e/0x40 [709732.359366] RIP: 0010:crc_41+0x0/0x1e [crc32c_intel] [709732.359370] Code: ff ff f2 4d 0f 38 f1 93 a8 fe ff ff f2 4c 0f 38 f1 81 b0 fe ff ff f2 4c 0f 38 f1 8a b0 fe ff ff f2 4d 0f 38 f1 93 b0 fe ff ff <f2> 4c 0f 38 f1 81 b8 fe ff ff f2 4c 0f 38 f1 8a b8 fe ff ff f2 4d [709732.359373] RSP: 0018:ffffbb97008dfcd0 EFLAGS: 00000246 [709732.359377] RAX: 000000000000002a RBX: 0000000000000400 RCX: ffff922fc591dd50 [709732.359379] RDX: ffff922fc591dea0 RSI: 0000000000000a14 RDI: ffffffffc00dddc0 [709732.359382] RBP: 0000000000001000 R08: 000000000342d8c3 R09: 0000000000000000 [709732.359384] R10: 0000000000000000 R11: ffff922fc591dff0 R12: ffffbb97008dfe58 [709732.359386] R13: 000000000000000a R14: ffff922fd2b91e80 R15: ffff922fef83fe38 [709732.359395] ? crc_43+0x1e/0x1e [crc32c_intel] [709732.359403] ? crc32c_pcl_intel_update+0x97/0xb0 [crc32c_intel] [709732.359419] ? jbd2_journal_commit_transaction+0xaec/0x1a30 [jbd2] [709732.359425] ? irq_exit_rcu+0x3e/0xa0 [709732.359447] ? kjournald2+0xbd/0x270 [jbd2] [709732.359454] ? finish_wait+0x80/0x80 [709732.359470] ? commit_timeout+0x10/0x10 [jbd2] [709732.359476] ? kthread+0x116/0x130 [709732.359481] ? kthread_park+0x80/0x80 [709732.359488] ? ret_from_fork+0x1f/0x30 [709732.359494] ---[ end trace 081a19978e5f09f5 ]--- that is, nft_pipapo_avx2_lookup() uses the FPU running from a softirq that interrupted a kthread, also using the FPU. That's exactly the reason why irq_fpu_usable() is there: use it, and if we can't use the FPU, fall back to the non-AVX2 version of the lookup operation, i.e. nft_pipapo_lookup(). Reported-by: Arturo Borrero Gonzalez <arturo@netfilter.org> Cc: <stable@vger.kernel.org> # 5.6.x Fixes: 7400b06 ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Chipidea also need sync interrupt before unbind the udc while gadget remove driver, otherwise setup irq handling may happen while unbind, see below dump generated from android function switch stress test: [ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED [ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED [ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED [ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server) [ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14) [ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090 [ 4703.676454] Mem abort info: [ 4703.676458] ESR = 0x96000004 [ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits [ 4703.676464] SET = 0, FnV = 0 [ 4703.676466] EA = 0, S1PTW = 0 [ 4703.676468] Data abort info: [ 4703.676471] ISV = 0, ISS = 0x00000004 [ 4703.676473] CM = 0, WnR = 0 [ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000 [ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000 [ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O) [ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63 [ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT) [ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.789667] lr : android_setup+0x4c/0x168 [ 4703.793676] sp : ffff80001256bd80 [ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8 [ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000 [ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140 [ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490 [ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000 [ 4703.823554] x19: 0000000000000080 x18: ffff800012561048 [ 4703.828867] x17: 0000000000000000 x16: 0000000000000039 [ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277 [ 4703.839493] x13: 0000000000003934 x12: 0000000000000000 [ 4703.844805] x11: 0000000000000000 x10: 0000000000000001 [ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090 [ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450 [ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009 [ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8 [ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090 [ 4703.876681] Call trace: [ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8 [ 4703.883397] android_setup+0x4c/0x168 [ 4703.887059] udc_irq+0x824/0xa9c [ 4703.890287] ci_irq+0x124/0x148 [ 4703.893429] __handle_irq_event_percpu+0x84/0x268 [ 4703.898131] handle_irq_event+0x64/0x14c [ 4703.902054] handle_fasteoi_irq+0x110/0x210 [ 4703.906236] __handle_domain_irq+0x8c/0xd4 [ 4703.910332] gic_handle_irq+0x6c/0x124 [ 4703.914081] el1_irq+0xdc/0x1c0 [ 4703.917221] _raw_spin_unlock_irq+0x20/0x54 [ 4703.921405] finish_task_switch+0x84/0x224 [ 4703.925502] __schedule+0x4a4/0x734 [ 4703.928990] schedule+0xa0/0xe8 [ 4703.932132] do_notify_resume+0x150/0x184 [ 4703.936140] work_pending+0xc/0x40c [ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01) [ 4703.945732] ---[ end trace ba5c1875ae49d53c ]--- [ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 4703.957223] SMP: stopping secondary CPUs [ 4703.961151] Kernel Offset: disabled [ 4703.964638] CPU features: 0x0240002,2000200c [ 4703.968905] Memory Limit: none [ 4703.971963] Rebooting in 5 seconds.. Tested-by: faqiang.zhu <faqiang.zhu@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com Signed-off-by: Peter Chen <peter.chen@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.13, take #1 - Fix regression with irqbypass not restarting the guest on failed connect - Fix regression with debug register decoding resulting in overlapping access - Commit exception state on exit to usrspace - Fix the MMU notifier return values - Add missing 'static' qualifiers in the new host stage-2 code

mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem. Fixes: 72e09ad ("ipv6: avoid high order allocations") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f824786 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init(). Fixes: 08a1006 ("net: hns3: re-organize vector handle") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83 RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1 RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820 RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05 R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000 R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0 FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000010 ---[ end trace 11804dbb55cb1a64 ]--- RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83 RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1 RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820 RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05 R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000 R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0 FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit f5ce815 ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE") introduced xas_next() calls to iterate xarray elements. These calls triggered the WARNING "suspicious RCU usage" at tcmu device set up [1]. In the call stack of xas_next(), xas_load() was called. According to its comment, this function requires "the xa_lock or the RCU lock". To avoid the warning: - Guard the small loop calling xas_next() in tcmu_get_empty_block with RCU lock. - In the large loop in tcmu_copy_data using RCU lock would possibly disable preemtion for a long time (copy multi MBs). Therefore replace XA_STATE, xas_set and xas_next with a single xa_load. [1] [ 1899.867091] ============================= [ 1899.871199] WARNING: suspicious RCU usage [ 1899.875310] 5.13.0-rc1+ #41 Not tainted [ 1899.879222] ----------------------------- [ 1899.883299] include/linux/xarray.h:1182 suspicious rcu_dereference_check() usage! [ 1899.890940] other info that might help us debug this: [ 1899.899082] rcu_scheduler_active = 2, debug_locks = 1 [ 1899.905719] 3 locks held by kworker/0:1/1368: [ 1899.910161] #0: ffffa1f8c8b98738 ((wq_completion)target_submission){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580 [ 1899.920732] #1: ffffbd7040cd7e78 ((work_completion)(&q->sq.work)){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580 [ 1899.931146] #2: ffffa1f8d1c99768 (&udev->cmdr_lock){+.+.}-{3:3}, at: tcmu_queue_cmd+0xea/0x160 [target_core_user] [ 1899.941678] stack backtrace: [ 1899.946093] CPU: 0 PID: 1368 Comm: kworker/0:1 Not tainted 5.13.0-rc1+ #41 [ 1899.953070] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 1899.962459] Workqueue: target_submission target_queued_submit_work [target_core_mod] [ 1899.970337] Call Trace: [ 1899.972839] dump_stack+0x6d/0x89 [ 1899.976222] xas_descend+0x10e/0x120 [ 1899.979875] xas_load+0x39/0x50 [ 1899.983077] tcmu_get_empty_blocks+0x115/0x1c0 [target_core_user] [ 1899.989318] queue_cmd_ring+0x1da/0x630 [target_core_user] [ 1899.994897] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1899.999695] ? trace_kmalloc+0xa6/0xd0 [ 1900.003501] ? __kmalloc+0x205/0x380 [ 1900.007167] tcmu_queue_cmd+0x12f/0x160 [target_core_user] [ 1900.012746] __target_execute_cmd+0x23/0xa0 [target_core_mod] [ 1900.018589] transport_generic_new_cmd+0x1f3/0x370 [target_core_mod] [ 1900.025046] transport_handle_cdb_direct+0x34/0x50 [target_core_mod] [ 1900.031517] target_queued_submit_work+0x43/0xe0 [target_core_mod] [ 1900.037837] process_one_work+0x268/0x580 [ 1900.041952] ? process_one_work+0x580/0x580 [ 1900.046195] worker_thread+0x55/0x3b0 [ 1900.049921] ? process_one_work+0x580/0x580 [ 1900.054192] kthread+0x143/0x160 [ 1900.057499] ? kthread_create_worker_on_cpu+0x40/0x40 [ 1900.062661] ret_from_fork+0x1f/0x30 Link: https://lore.kernel.org/r/20210519135440.26773-1-bostroesser@gmail.com Fixes: f5ce815 ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE") Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

…to non-AVX2 version commit f0b3d33 upstream. Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_sublist_rcv_finish+0x4f/0x60 [709732.359243] ip_sublist_rcv+0x196/0x220 [709732.359250] ? ip_rcv_finish_core.isra.22+0x400/0x400 [709732.359255] ip_list_rcv+0x137/0x160 [709732.359264] __netif_receive_skb_list_core+0x29b/0x2c0 [709732.359272] netif_receive_skb_list_internal+0x1a6/0x2d0 [709732.359280] gro_normal_list.part.156+0x19/0x40 [709732.359286] napi_complete_done+0x67/0x170 [709732.359298] bnxt_poll+0x105/0x190 [bnxt_en] [709732.359304] ? irqentry_exit+0x29/0x30 [709732.359309] ? asm_common_interrupt+0x1e/0x40 [709732.359315] net_rx_action+0x144/0x3c0 [709732.359322] __do_softirq+0xd5/0x29c [709732.359329] asm_call_irq_on_stack+0xf/0x20 [709732.359332] </IRQ> [709732.359339] do_softirq_own_stack+0x37/0x40 [709732.359346] irq_exit_rcu+0x9d/0xa0 [709732.359353] common_interrupt+0x78/0x130 [709732.359358] asm_common_interrupt+0x1e/0x40 [709732.359366] RIP: 0010:crc_41+0x0/0x1e [crc32c_intel] [709732.359370] Code: ff ff f2 4d 0f 38 f1 93 a8 fe ff ff f2 4c 0f 38 f1 81 b0 fe ff ff f2 4c 0f 38 f1 8a b0 fe ff ff f2 4d 0f 38 f1 93 b0 fe ff ff <f2> 4c 0f 38 f1 81 b8 fe ff ff f2 4c 0f 38 f1 8a b8 fe ff ff f2 4d [709732.359373] RSP: 0018:ffffbb97008dfcd0 EFLAGS: 00000246 [709732.359377] RAX: 000000000000002a RBX: 0000000000000400 RCX: ffff922fc591dd50 [709732.359379] RDX: ffff922fc591dea0 RSI: 0000000000000a14 RDI: ffffffffc00dddc0 [709732.359382] RBP: 0000000000001000 R08: 000000000342d8c3 R09: 0000000000000000 [709732.359384] R10: 0000000000000000 R11: ffff922fc591dff0 R12: ffffbb97008dfe58 [709732.359386] R13: 000000000000000a R14: ffff922fd2b91e80 R15: ffff922fef83fe38 [709732.359395] ? crc_43+0x1e/0x1e [crc32c_intel] [709732.359403] ? crc32c_pcl_intel_update+0x97/0xb0 [crc32c_intel] [709732.359419] ? jbd2_journal_commit_transaction+0xaec/0x1a30 [jbd2] [709732.359425] ? irq_exit_rcu+0x3e/0xa0 [709732.359447] ? kjournald2+0xbd/0x270 [jbd2] [709732.359454] ? finish_wait+0x80/0x80 [709732.359470] ? commit_timeout+0x10/0x10 [jbd2] [709732.359476] ? kthread+0x116/0x130 [709732.359481] ? kthread_park+0x80/0x80 [709732.359488] ? ret_from_fork+0x1f/0x30 [709732.359494] ---[ end trace 081a19978e5f09f5 ]--- that is, nft_pipapo_avx2_lookup() uses the FPU running from a softirq that interrupted a kthread, also using the FPU. That's exactly the reason why irq_fpu_usable() is there: use it, and if we can't use the FPU, fall back to the non-AVX2 version of the lookup operation, i.e. nft_pipapo_lookup(). Reported-by: Arturo Borrero Gonzalez <arturo@netfilter.org> Cc: <stable@vger.kernel.org> # 5.6.x Fixes: 7400b06 ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

geertu added 6 commits May 7, 2021 15:40

riscv: dts: starfive: jh7100-starlight: Add ack LED
0494f98
Add a device node for the LED labeled "ack", and use it as a heartbeat. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

esmil merged commit 0494f98 into esmil:starlightMay 7, 2021

Navigation Menu

Starlight DTS cleanups and LED support - #1

Starlight DTS cleanups and LED support#1
esmil merged 6 commits into
esmil:starlightfrom
geertu:starlight

geertu commented May 7, 2021

Uh oh!

esmil commented May 7, 2021

Uh oh!

geertu commented May 7, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Conversation

geertu commented May 7, 2021

Uh oh!

esmil commented May 7, 2021

Uh oh!

geertu commented May 7, 2021

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants