`nuxi init` fails with yarn

[polarathene]

This still seems to be problematic.

If you have docker installed the reproduction should help you verify a proper fix going forward? Below is two failing cases and one that is successful with a bit of extra configuration (that nuxi init could configure).

⚡️ Nuxt Generation CLI Experience (nuxi v3.9.0)

Previous issues stating it had been resolved with 3.8:

• Nuxt 3 install issues #132 (comment)
• Nuxt 3.7 Yarn failed to install #121 (comment)

Related issues on yarn support with nuxt:

• support for yarn 3 without node-modules linker nuxt#22861 (comment)
• Nuxt v3 - Fatal error when running yarn install nuxt#15774 (comment)
• pnpm support without --shamefully-hoist nuxt#14146 (comment)
• plug and play support nuxt#11823 (comment)
• Default setup doesn't work with yarn 3 nuxt#19618 (comment)

❌ | Yarn 3.6.3 (defaults to nodeLinker: pnp)

ERROR Error: Command failed with exit code 1: corepack yarn install

# Reproducible nodejs environment:
$ docker run --rm -it --workdir /reproduction node:20-bookworm-slim bash

# Legacy yarn is global default:
$ yarn -v
v1.22.19

# `yarn -v` will match any yarn version specified in the `packageManager` field of `package.json`:
$ corepack enable

# If a `package.json` is not present (or is missing `packageManager` field), this sets the fallback version:
# (_Still requires corepack to have been enabled to be applicable_)
$ corepack prepare yarn@stable --activate

$ yarn -v
3.6.3

# Run `nuxi init` non-interactively via explicit options:
$ yarn dlx nuxi init --packageManager yarn --gitInit false .

➤ YN0000: ┌ Resolution step
➤ YN0032: │ fsevents@npm:2.3.3: Implicit dependencies on node-gyp are discouraged
➤ YN0000: └ Completed in 2s 406ms
➤ YN0000: ┌ Fetch step
➤ YN0000: └ Completed
➤ YN0000: ┌ Link step
➤ YN0000: │ ESM support for PnP uses the experimental loader API and is therefore experimental
➤ YN0000: └ Completed
➤ YN0000: Done with warnings in 2s 606ms

◐ Installing dependencies...
➤ YN0000: ┌ Resolution step
➤ YN0032: │ fsevents@npm:2.3.3: Implicit dependencies on node-gyp are discouraged
➤ YN0032: │ @parcel/watcher@npm:2.3.0: Implicit dependencies on node-gyp are discouraged
➤ YN0032: │ node-addon-api@npm:7.0.0: Implicit dependencies on node-gyp are discouraged
➤ YN0002: │ nuxt-app@workspace:. doesn't provide vite (p73f11), requested by @nuxt/devtools
➤ YN0000: │ Some peer dependencies are incorrectly met; run yarn explain peer-requirements <hash> for details, where <hash> is the six-letter p-prefixed code
➤ YN0000: └ Completed in 6s 967ms
➤ YN0000: ┌ Fetch step
➤ YN0013: │ yaml@npm:2.3.2 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ yargs-parser@npm:21.1.1 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ yargs@npm:17.7.2 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ zhead@npm:2.1.1 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ zip-stream@npm:5.0.1 can't be found in the cache and will be fetched from the remote registry
➤ YN0000: └ Completed in 1s 152ms
➤ YN0000: ┌ Link step
➤ YN0000: │ ESM support for PnP uses the experimental loader API and is therefore experimental
➤ YN0007: │ esbuild@npm:0.18.20 must be built because it never has been before or the last one failed
➤ YN0007: │ esbuild@npm:0.19.3 must be built because it never has been before or the last one failed
➤ YN0009: │ esbuild@npm:0.18.20 couldn't be built successfully (exit code 1, logs can be found here: /tmp/xfs-797ad338/build.log)
➤ YN0009: │ esbuild@npm:0.19.3 couldn't be built successfully (exit code 1, logs can be found here: /tmp/xfs-56d77649/build.log)
➤ YN0007: │ nuxt-app@workspace:. must be built because it never has been before or the last one failed
➤ YN0009: │ nuxt-app@workspace:. couldn't be built successfully (exit code 1, logs can be found here: /tmp/xfs-8ee15c2e/build.log)
➤ YN0000: └ Completed in 0s 646ms
➤ YN0000: Failed with errors in 8s 813ms

 ERROR Error: Command failed with exit code 1: corepack yarn install

❌ | Yarn 1.22.19 (no PNP, uses node_modules)

error Couldn't find a package.json file in "/reproduction"

$ docker run --rm -it --workdir /reproduction node:20-bookworm-slim bash

# Fails (corepack is not enabled by default)
$ yarn dlx nuxi init --packageManager yarn --gitInit false .
yarn run v1.22.19
error Couldn't find a package.json file in "/reproduction"
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.

Try again (with corepack enabled):

ERROR Error: Command failed with exit code 1: corepack yarn install

$ docker run --rm -it --workdir /reproduction node:20-bookworm-slim bash
$ corepack enable

# `yarn dlx` will use a modern version of yarn to run,
# `nuxi init` will then run the global yarn which is still 1.22.19:
$ yarn dlx nuxi init --packageManager yarn --gitInit false .

➤ YN0000: ┌ Resolution step
➤ YN0032: │ fsevents@npm:2.3.3: Implicit dependencies on node-gyp are discouraged
➤ YN0000: └ Completed in 2s 342ms
➤ YN0000: ┌ Fetch step
➤ YN0013: │ wide-align@npm:1.1.5 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ wrap-ansi@npm:7.0.0 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ wrap-ansi@npm:8.1.0 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ wrappy@npm:1.0.2 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ yallist@npm:4.0.0 can't be found in the cache and will be fetched from the remote registry
➤ YN0000: └ Completed in 1s 331ms
➤ YN0000: ┌ Link step
➤ YN0000: │ ESM support for PnP uses the experimental loader API and is therefore experimental
➤ YN0000: └ Completed
➤ YN0000: Done with warnings in 3s 845ms

◐ Installing dependencies...
yarn install v1.22.19
info No lockfile found.
[1/4] Resolving packages...
[2/4] Fetching packages...
warning vscode-languageclient@7.0.0: The engine "vscode" appears to be invalid.
[3/4] Linking dependencies...
warning " > @nuxt/devtools@0.8.4" has unmet peer dependency "vite@*".
warning "@nuxt/devtools > vite-plugin-inspect@0.7.38" has unmet peer dependency "vite@^3.1.0 || ^4.0.0".
warning "@nuxt/devtools > vite-plugin-vue-inspector@3.7.1" has unmet peer dependency "vite@^3.0.0-0 || ^4.0.0-0".
warning "@nuxt/devtools > @nuxt/devtools-kit@0.8.4" has unmet peer dependency "vite@*".
[4/4] Building fresh packages...
⠁
⠁
error An unexpected error occurred: "/reproduction/node_modules/@esbuild-kit/core-utils/node_modules/esbuild, /reproduction/node_modules/vite/node_modules/esbuild: Cannot find module 'pnpapi'
Require stack:
- /root/.cache/node/corepack/yarn/1.22.19/lib/cli.js
Require stack:
- /root/.cache/node/corepack/yarn/1.22.19/lib/cli.js".



 ERROR Error: Command failed with exit code 1: corepack yarn install

✔️ | Yarn 3.6.3 (change to nodeLinker: node-modules)

Installation completed.

Unless you have a way to resolve the issues above (Yarn project seems to want to keep legacy yarn as global by default, only using corepack to upgrade with yarn dlx and package.json approaches 🤷‍♂️ ), you may have to let users know to override the linker via ENV?

• When choosing yarn you should probably set packageManager in package.json to ensure it installs with a newer version of yarn (when corepack is enabled).
• Since Nuxt is not compatible with PnP linker, you'd additionally want to create a .yarnrc.yml with nodeLinker: node-modules as a minimum. Once you've configured pacakge.json:packageManager (must be semver like yarn@3.6.3, cannot use yarn@stable), you can run yarn config set nodeLinker node-modules to do this (if easier than manually creating the file).

EDIT: PNPM support has a related workaround in nuxi init with creating a .npmrc file.

$ docker run --rm -it --workdir /reproduction node:20-bookworm-slim bash

# Requirement (user should already have applied via reading yarn install docs):
$ corepack enable

# Temporary workaround until `package.json:packageManager` is implemented:
$ corepack prepare yarn@stable --activate

# Temporary linker workaround with ENV (`yarn config` not usable until `package.json` exists):
$ YARN_NODE_LINKER=node-modules yarn dlx nuxi init --packageManager yarn --gitInit false .

➤ YN0000: ┌ Resolution step
➤ YN0032: │ fsevents@npm:2.3.3: Implicit dependencies on node-gyp are discouraged
➤ YN0000: └ Completed in 3s 112ms
➤ YN0000: ┌ Fetch step
➤ YN0013: │ wide-align@npm:1.1.5 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ wrap-ansi@npm:7.0.0 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ wrap-ansi@npm:8.1.0 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ wrappy@npm:1.0.2 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ yallist@npm:4.0.0 can't be found in the cache and will be fetched from the remote registry
➤ YN0000: └ Completed in 1s 302ms
➤ YN0000: ┌ Link step
➤ YN0000: └ Completed
➤ YN0000: Done with warnings in 4s 562ms

◐ Installing dependencies...
➤ YN0000: ┌ Resolution step
➤ YN0032: │ fsevents@npm:2.3.3: Implicit dependencies on node-gyp are discouraged
➤ YN0032: │ @parcel/watcher@npm:2.3.0: Implicit dependencies on node-gyp are discouraged
➤ YN0032: │ node-addon-api@npm:7.0.0: Implicit dependencies on node-gyp are discouraged
➤ YN0002: │ nuxt-app@workspace:. doesn't provide vite (p73f11), requested by @nuxt/devtools
➤ YN0000: │ Some peer dependencies are incorrectly met; run yarn explain peer-requirements <hash> for details, where <hash> is the six-letter p-prefixed code
➤ YN0000: └ Completed in 9s 776ms
➤ YN0000: ┌ Fetch step
➤ YN0013: │ yaml@npm:2.3.2 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ yargs-parser@npm:21.1.1 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ yargs@npm:17.7.2 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ zhead@npm:2.1.1 can't be found in the cache and will be fetched from the remote registry
➤ YN0013: │ zip-stream@npm:5.0.1 can't be found in the cache and will be fetched from the remote registry
➤ YN0000: └ Completed in 5s 537ms
➤ YN0000: ┌ Link step
➤ YN0007: │ esbuild@npm:0.19.3 must be built because it never has been before or the last one failed
➤ YN0007: │ esbuild@npm:0.18.20 must be built because it never has been before or the last one failed
➤ YN0007: │ nuxt-app@workspace:. must be built because it never has been before or the last one failed
➤ YN0000: └ Completed in 4s 253ms
➤ YN0000: Done with warnings in 19s 677ms
✔ Installation completed.

✨ Nuxt project has been created with the v3 template. Next steps:
 › Start development server with yarn run dev

NOTE: yarn dlx is not a great experience with nuxi since each time yarn takes about 4 seconds to prepare 🙄 (more of an issue with how yarn works, nothing to do with nuxi AFAIK)

Until nuxi init handles the additional yarn support changes. Users should:

• Add the packageManager field to package.json (better portability).
• Run yarn config set nodeLinker: node-modules (avoid requiring an ENV to override).

`yarn build` is successful

Important, since you can use yarn install in some nuxt project that is successful (with nodeLinker: pnp) but fails with yarn build.

$ YARN_NODE_LINKER=node-modules yarn build

Nuxt 3.7.3 with Nitro 2.6.3


ℹ Building client...
ℹ vite v4.4.9 building for production...
ℹ ✓ 112 modules transformed.
ℹ .nuxt/dist/client/manifest.json 1.59 kB │ gzip: 0.31 kB
ℹ .nuxt/dist/client/_nuxt/error-500.c5df6088.css 1.95 kB │ gzip: 0.74 kB
ℹ .nuxt/dist/client/_nuxt/error-404.7fc72018.css 3.63 kB │ gzip: 1.12 kB
ℹ .nuxt/dist/client/_nuxt/entry.3c4ebcd6.css 12.13 kB │ gzip: 2.49 kB
ℹ .nuxt/dist/client/_nuxt/error-500.e5a1dd9d.js 1.88 kB │ gzip: 0.99 kB
ℹ .nuxt/dist/client/_nuxt/error-404.d5f8e506.js 6.53 kB │ gzip: 2.91 kB
ℹ .nuxt/dist/client/_nuxt/entry.8be7e620.js 197.90 kB │ gzip: 55.68 kB
ℹ ✓ built in 1.07s
✔ Client built in 1083ms


ℹ Building server...
ℹ vite v4.4.9 building SSR bundle for production...
ℹ ✓ 61 modules transformed.
ℹ .nuxt/dist/server/_nuxt/entry-styles.8755339a.mjs 0.08 kB
ℹ .nuxt/dist/server/_nuxt/error-404-styles.1e0dde27.mjs 0.15 kB
ℹ .nuxt/dist/server/_nuxt/error-500-styles.cf4b3e80.mjs 0.15 kB
ℹ .nuxt/dist/server/styles.mjs 0.46 kB
ℹ .nuxt/dist/server/_nuxt/island-renderer-bc39a2f4.js 1.06 kB │ map: 1.38 kB
ℹ .nuxt/dist/server/_nuxt/error-500-styles-1.mjs-8fa81fcc.js 2.17 kB │ map: 0.12 kB
ℹ .nuxt/dist/server/_nuxt/error-500-57cb52a6.js 3.03 kB │ map: 3.77 kB
ℹ .nuxt/dist/server/_nuxt/error-404-styles-1.mjs-e0837f4f.js 3.86 kB │ map: 0.12 kB
ℹ .nuxt/dist/server/_nuxt/error-404-3dc619ae.js 9.70 kB │ map: 18.97 kB
ℹ .nuxt/dist/server/_nuxt/entry-styles-1.mjs-8b8449e7.js 12.38 kB │ map: 0.11 kB
ℹ .nuxt/dist/server/server.mjs 120.84 kB │ map: 163.36 kB
ℹ ✓ built in 536ms
✔ Server built in 543ms
✔ Generated public .output/public


ℹ Building Nitro Server (preset: node-server)
✔ Nitro server built
 ├─ .output/server/chunks/app/_nuxt/entry-styles.8755339a.mjs (12.4 kB) (2.61 kB gzip)
 ├─ .output/server/chunks/app/_nuxt/entry-styles.8755339a.mjs.map (312 B) (202 B gzip)
 ├─ .output/server/chunks/app/_nuxt/error-404-3dc619ae.mjs (9.81 kB) (3.12 kB gzip)
 ├─ .output/server/chunks/app/_nuxt/error-404-3dc619ae.mjs.map (8.02 kB) (1.97 kB gzip)
 ├─ .output/server/chunks/app/_nuxt/error-404-styles.1e0dde27.mjs (3.98 kB) (1.25 kB gzip)
 ├─ .output/server/chunks/app/_nuxt/error-404-styles.1e0dde27.mjs.map (346 B) (215 B gzip)
 ├─ .output/server/chunks/app/_nuxt/error-500-57cb52a6.mjs (3.07 kB) (1.35 kB gzip)
 ├─ .output/server/chunks/app/_nuxt/error-500-57cb52a6.mjs.map (1.68 kB) (600 B gzip)
 ├─ .output/server/chunks/app/_nuxt/error-500-styles.cf4b3e80.mjs (2.28 kB) (870 B gzip)
 ├─ .output/server/chunks/app/_nuxt/error-500-styles.cf4b3e80.mjs.map (346 B) (217 B gzip)
 ├─ .output/server/chunks/app/_nuxt/island-renderer-bc39a2f4.mjs (1.17 kB) (525 B gzip)
 ├─ .output/server/chunks/app/_nuxt/island-renderer-bc39a2f4.mjs.map (897 B) (413 B gzip)
 ├─ .output/server/chunks/app/client.manifest.mjs (2.52 kB) (461 B gzip)
 ├─ .output/server/chunks/app/client.manifest.mjs.map (2.04 kB) (405 B gzip)
 ├─ .output/server/chunks/app/server.mjs (123 kB) (23.7 kB gzip)
 ├─ .output/server/chunks/app/server.mjs.map (220 B) (164 B gzip)
 ├─ .output/server/chunks/app/styles.mjs (533 B) (269 B gzip)
 ├─ .output/server/chunks/app/styles.mjs.map (429 B) (216 B gzip)
 ├─ .output/server/chunks/error-500.mjs (4.26 kB) (1.82 kB gzip)
 ├─ .output/server/chunks/error-500.mjs.map (193 B) (157 B gzip)
 ├─ .output/server/chunks/handlers/renderer.mjs (12.9 kB) (4.08 kB gzip)
 ├─ .output/server/chunks/handlers/renderer.mjs.map (424 B) (227 B gzip)
 ├─ .output/server/chunks/multipart-parser.mjs (5.04 kB) (2.1 kB gzip)
 ├─ .output/server/chunks/multipart-parser.mjs.map (210 B) (167 B gzip)
 ├─ .output/server/chunks/nitro/node-server.mjs (260 kB) (66.5 kB gzip)
 ├─ .output/server/chunks/nitro/node-server.mjs.map (3.21 kB) (834 B gzip)
 ├─ .output/server/chunks/rollup/_virtual_spa-template.mjs (94 B) (100 B gzip)
 ├─ .output/server/chunks/rollup/_virtual_spa-template.mjs.map (112 B) (112 B gzip)
 ├─ .output/server/index.mjs (389 B) (210 B gzip)
 └─ .output/server/package.json (708 B) (294 B gzip)
Σ Total size: 2.33 MB (558 kB gzip)
✔ You can preview this build using node .output/server/index.mjs

[polarathene]

Additional observation.

When using PNPM, .npmrc file is not created only in the project directory, but was also observed as being added to the root of the filesystem /.npmrc. It shouldn't do that, as the config is specific to Nuxt support?

[Extarys]

To keep track of stuff: Yarn 4 released now : https://yarnpkg.com/blog/release/4.0

[jits]

@polarathene – that should be fixed by #272

[DarkLite1]

New user here and I've just installed node.js using nvm. Now that is done I'm following the Installation guide which says to execute:

npx nuxi@latest init <project-name>

This always yields the following error:

Because we don't have a project yet, there is no package.json to edit. So we executed the suggestion above without success:

yarn config set nodeLinker node-modules

We also tried yarn config set "strict-ssl" false but without success.

Is there something else we can do to get around this error? Thank you for your help.

[hotenov]

@DarkLite1 Hi! You can always set yarn setting(s) via environment variable(s) (although yarn doc page says: use them sparingly)

In your case, the following command should do what you need (on Linux/Unix machine):

Bash

YARN_NODE_LINKER='node-modules' npx nuxi init projectname

As I see you use Windows (as I do 😃 ), so choose your option:

PowerShell

$env:YARN_NODE_LINKER='node-modules'; npx nuxi init projectname; $env:YARN_NODE_LINKER=$null

CMD

set "YARN_NODE_LINKER=node-modules" & npx nuxi init projectname

Important: For CMD pay attention that we DO NOT use single quotes around node-modules. If you forgot to remove them, installation likely will fail with similar error outpt:

...
➤ YN0012: │ nuxt@npm:3.11.2 [1f046] isn't supported by any available linker
➤ YN0000: └ Completed
➤ YN0000: · Failed with errors in 8s 50ms

ERROR Error: Command failed with exit code 1: corepack yarn install

Note: These commands are not cluttered your system environment variables. Of course, you can set YARN_NODE_LINKER='node-modules' in advance (and if you use node_modules on all your projects). Then npx nuxi init should work without any preparation.

[jmarshall9120]

I'm having the same experience. Some extra info that might help with the cases. Let me know if this should be an separate ticket.

I originally had the same issue as CASE #2 that op posted. I solved in the end by upgrading Yarn. Now I have:

Yarn:

4.3.1

Node:

v20.`12.2

This has made the pnpapi dependencies resolve, but still leaves an issue running the basic install from docs

cd 'M:\\source'
yarn dlx nuxi@latest init AdvancedStorageV3

output:

➤ YN0000: · Yarn 4.3.1
➤ YN0000: ┌ Resolution step
➤ YN0085: │ + nuxi@npm:3.12.0, @isaacs/cliui@npm:8.0.2, @npmcli/agent@npm:2.2.2, @npmcli/fs@npm:3.1.1, and 90 more.
➤ YN0000: └ Completed in 1s 491ms
➤ YN0000: ┌ Fetch step
➤ YN0013: │ 93 packages were added to the project (+ 13.2 MiB).
➤ YN0000: └ Completed
➤ YN0000: ┌ Link step
➤ YN0000: │ ESM support for PnP uses the experimental loader API and is therefore experimental
➤ YN0000: └ Completed in 0s 286ms
➤ YN0000: · Done with warnings in 1s 972ms


✔ Which package manager would you like to use?
yarn


- If M: is intended to be a project, it might be that you forgot to list source/AdvancedStorageV3 in its workspace configuration.
- Finally, if M: is fine and you intend source/AdvancedStorageV3 to be treated as a completely separate project (not even a workspace), create an empty yarn.lock file in it.

$ yarn install [--json] [--immutable] [--immutable-cache] [--refresh-lockfile] [--check-cache] [--check-resolutions] [--inline-builds] [--mode #0]

 ERROR Error: Command failed with exit code 1: corepack yarn install 

I'm guessing under the hood, the installer is passing the directory somewhere and its failing. Might be a windows/unix thing. Trying a bunch of workarounds now.

[jmarshall9120]

Okay, this is quite interesting. It turns out the error above is still related to the pnpapi error. Somehow, when upgrading yarn, yarn placed some packages at root M:. Those packages were creating the conflict above. When I removed those packages I got the pnpapi error again.

Rerunning, yarn set version stable, does not make those packages reappear.

[jmarshall9120]

The Yarn update is a false positive. It just caught old dependencies in the root then created a conflict for some reason. I get the same issue as OP Case 2 on Yarn 4.3.1.

[jmarshall9120]

@danielroe - yarn dev from ticket not found module @nuxt/kit when use yarn Plug'n'play #26750 doesn't work with work arounds on windows:

$env:YARN_NODE_LINKER='node-modules';
yarn dev

output

Usage Error: Couldn't find the node_modules state file - running an install might help (findPackageLocation)

$ yarn run [--inspect] [--inspect-brk] [-T,--top-level] [-B,--binaries-only] [--require #0] <scriptName> ...

Side Note:
Are we in a state where yarn + nuxt is now un-installable? I got into this trying to do some simple tests on a clean install. This ticket looks like a blocker.

[danielroe]

That seems like a yarn issue, not a Nuxt one.

[charliebeckstrand]

After upgrading Yarn to 4.4.0, I was also getting this error when trying to nuxi init:

ERROR Error: Command failed with exit code 1: corepack yarn install

I fixed it by adding this to my .yarnrc.yml file:

nodeLinker: node-modules

[Foddie2]

The same after removing the node-modules and package-lock module getting the error

error Can't add "nuxt-app": invalid package version "".